windows 7 wirelee webss acces but will not connet
Installed window 7 on my sony laptop wireless access card connects to the router but will not connect to the web say limit access what do I need to get this to work
September 24th, 2010 11:09pm

Hi, have you properly set your DNS servers? What say command ipconfig /all <<write this command to cmd. Try ping 8.8.8.8 if it will working. Then try ping google.com << if it will working, you will be connected to internet. If work only ping 8.8.8.8 then you have no DNS servers set (or wrong). Example: Changing DNS server settings on Microsoft Windows Vista Go the Control Panel. Click Network and Internet, then Network and Sharing Center, then Manage network connections. Select the connection for which you want to configure Google Public DNS. For example: To change the settings for an Ethernet connection, right-click Local Area Connection, and click Properties. To change the settings for a wireless connection, right-click Wireless Network Connection, and click Properties. If you are prompted for an administrator password or confirmation, type the password or provide confirmation. Select the Networking tab. Under This connection uses the following items, click Internet Protocol Version 4 (TCP/IPv4), and then click Properties. Click Advanced and select the DNS tab. If there are any DNS server IP addresses listed there, write them down for future reference, and remove them from this window. Click OK. Select Use the following DNS server addresses. If there are any IP addresses listed in the Preferred DNS server or Alternate DNS server, write them down for future reference. Replace those addresses with the IP addresses of the Google DNS servers: 8.8.8.8 and 8.8.4.4. Restart the connection you selected in step 3. Test that your setup is working correctly; see Testing your new settings below. Repeat the procedure for additional network connections you want to change.
Free Windows Admin Tool Kit Click here and download it now
September 25th, 2010 5:37am

How do you connect to Internet if there is no router? Do you need to dial up with username/password? If so, please configure the Internet connection in your router. Also I suggest you contact your ISP and ask questions regarding how to configure Internet connection settings when router is involved.Please remember to click Mark as Answer on the post that helps you, and to click Unmark as Answer if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
September 28th, 2010 4:58am

This topic is archived. No further replies will be accepted.

Other recent topics Other recent topics