i have a boradband connenction.when i connect it to computer ,first showing acquring network address.but connection status shows invalid ip address..again shows limited or no connectivity.please help me .1 person needs an answerI do too

i have a boradband connenction.when i connect it to computer ,first showing acquring network address.but connection status shows invalid ip address..again shows limited or no connectivity.please help me .Are you attempting to connect wirelessly? If so, you probably are entering the encryption password incorrectly or the wireless access point/router has some additional security measure that's keeping you out.Please do the following:1. Start > Run > cmd > OK2. In the Command Prompt window, type the following and press Enter ipconfig /all > "%UserProfile%\Desktop\ip.txt"3. Open the file ip.txt on your Desktop and copy/paste the contents into your reply.

Windows IP Configuration Host Name . . . . . . . . . . . . : John Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : NoEthernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe FE Family Controller Physical Address. . . . . . . . . : 70-71-BC-1E-C1-67 Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Autoconfiguration IP Address. . . : 169.254.147.16 Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : 169.254.147.16PPP adapter Aircel: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface Physical Address. . . . . . . . . : 00-53-45-00-00-00 Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 175.40.231.147 Subnet Mask . . . . . . . . . . . : 255.255.255.255 Default Gateway . . . . . . . . . : 175.40.231.147 DNS Servers . . . . . . . . . . . : 202.148.202.3 202.148.202.4 NetBIOS over Tcpip. . . . . . . . : Disabled

The information you provided indicates two network connections. One of these appears to be an AirCel internet-over-cell phone connection. This is set to a fixed or static IP address, so it does not seem likely that this connection is the one that's giving the "acquiring network address" message.The second network connection is an Ethernet connection. This IS set to acquire an IP address automatically but the IP address that is shown indicates that your computer has failed to obtain an IP address.Are you trying to connect with your AirCel or with your Ethernet cable connection? What is the other end of the Ethernet cable connected to?