I have a TMG with 5 NICs, each in a VLAN and an additional NIC is connected to the Internet. Right now all have Gateway, since, but the corresponding VLANs servers can not bepublished.

Do I understand that a server cannot have multiple Gateways, but being so, as I canpublish servers of each of the VLANs?

Regards

I have a TMG with 5 NICs, each in a VLAN and an additional NIC is connected to the Internet. Right now all have Gateway, since, but the corresponding VLANs servers can not bepublished.

Do I understand that a server cannot have multiple Gateways, but being so, as I canpublish servers of each of the VLANs?

Regards

Forefront TMG does support ISP Redundancy which you have to configure specifically.

Forefront TMG does not support more than two default gateways configured on the same network adapter (within different subnets), or on two different adapters (one default gateway per adapter). Using more than one default gateway is only supported for the ISP Redundancy feature.

See the following link for more information:

TMG - Unsupported configurations
https://technet.microsoft.com/en-us/library/ee796231.aspx#iiii76rfi

Hi,

you need to setup basic routing. SO if you have multiple Vlan then I would suggest to have InterVlan routing enabled between subnets so that all subnet can reach each other.

Since you can have only one gateway, you need to add static route for each subnet to L3 Interface IP address of you Vlan.

Now you will be able to publish anything ...

Hi,

you need to setup basic routing. SO if you have multiple Vlan then I would suggest to have InterVlan routing enabled between subnets so that all subnet can reach each other.

Since you can have only one gateway, you need to add static route for each subnet to L3 Interface IP address of you Vlan.

Now you will be able to publish anything ...

• Proposed as answer by Joyce LMicrosoft contingent staff, Moderator 23 hours 1 minutes ago

Hi,

you need to setup basic routing. SO if you have multiple Vlan then I would suggest to have InterVlan routing enabled between subnets so that all subnet can reach each other.

Since you can have only one gateway, you need to add static route for each subnet to L3 Interface IP address of you Vlan.

Now you will be able to publish anything ...

• Proposed as answer by Joyce LMicrosoft contingent staff, Moderator Wednesday, June 03, 2015 8:24 AM
• Marked as answer by Joyce LMicrosoft contingent staff, Moderator 21 hours 53 minutes ago

Hi,

you need to setup basic routing. SO if you have multiple Vlan then I would suggest to have InterVlan routing enabled between subnets so that all subnet can reach each other.

Since you can have only one gateway, you need to add static route for each subnet to L3 Interface IP address of you Vlan.

Now you will be able to publish anything ...

• Proposed as answer by Joyce LMicrosoft contingent staff, Moderator Wednesday, June 03, 2015 8:24 AM
• Marked as answer by Joyce LMicrosoft contingent staff, Moderator Thursday, June 04, 2015 9:31 AM