making the usb flash bootable
Dears,
How can i make a flash bootable ?
Best Regard
April 9th, 2012 2:59am
Hi,
How to create a bootable flash drive
-----------------------------------------
1. From a Windows 7 or Windows PE environment, run the DiskPart tool.
For example, at the command prompt, type the following:
Diskpart
2. Use the DiskPart tool to determine the disk number and device size to be used for the next step by typing the following at the DiskPart command
prompt:
list disk
3. Use the DiskPart tool to partition and format the device and make it bootable.
For example, if the UFD is Disk 1, type the following at the DiskPart command prompt, replacing <device_size> with the
capacity of the UFD (in MB).
select disk <disk_number>
clean
create partition primary size=<device_size>
select partition 1
active
format fs=ntfs quick
assign
exit
Now the USB flash is bootable
More reference
http://www.youtube.com/watch?v=eibbW7B53Tc
Hope this helps
Free Windows Admin Tool Kit Click here and download it now
April 10th, 2012 1:12am
For windows 7, winodws 8, server 2008 usb bootable
http://social.technet.microsoft.com/Forums/en-US/winservergen/thread/54c0ddfe-55a5-4b20-9579-352f22b7e7e8/#1e2ff09f-e666-411e-a672-1f0f31857722
Mohammed Imtiyaz Ali
April 10th, 2012 1:56am
Please refer below link
http://downloadsquad.switched.com/2009/08/27/make-a-bootable-usb-installer-for-windows-xp-vista-7-with-wint/
http://wintoflash.findmysoft.com/download/#
Mohammed Imtiyaz Ali
Free Windows Admin Tool Kit Click here and download it now
April 10th, 2012 2:06am