i have the licensed windows 7 but though it comes to me that it is not genuine!what must i do now?

Hi, please run the Microsoft Genuine Diagnostics Tool (MGADiag) [1]. Inside the tool click "Copy" and paste the output here. André [1] http://go.microsoft.com/fwlink/?linkid=52012"A programmer is just a tool which converts caffeine into code" Want to install RSAT on Windows 7 Sp1? Check my HowTo: http://www.msfn.org/board/index.php?showtopic=150221

You can register genuine copy of Windows 7 online from Microsoft’s website. But it is essential for you to make sure that the copy of Windows 7, which you have purchased is authentic or not. There are three methods to check the authenticity of Windows 7. Method 1- Activate Windows Dialog Just go to “start”, then write “activate windows” in the search box. If you’re the copy which you have purchased is activated and genuine, you will get a message “Activation was successful” and the Microsoft Genuine software logo seems to be appearing on the right hand side. Method 2- Validate Online You can use validation tool available on the Microsoft website to determine that you have a genuine copy of Windows 7 or not. Method 3- Control Panel The third and the last way to check for Genuine Windows is verify through Control Panel. Click on “Start”, then “Control Panel”, then choose “System and Security” and finally click on “System”. Then scroll down the page and you will come to see a section called Windows activation, which indicates “Windows is activated” and gives you the Product ID with the genuine Microsoft software logo.Windows 7

You can register genuine copy of Windows 7 online from Microsoft’s website. But it is essential for you to make sure that the copy of Windows 7, which you have purchased is authentic or not. There are three methods to check the authenticity of Windows 7. Method 1- Activate Windows Dialog Just go to “start”, then write “activate windows” in the search box. If you’re the copy which you have purchased is activated and genuine, you will get a message “Activation was successful” and the Microsoft Genuine software logo seems to be appearing on the right hand side. Method 2- Validate Online You can use validation tool available on the Microsoft website to determine that you have a genuine copy of Windows 7 or not. Method 3- Control Panel The third and the last way to check for Genuine Windows is verify through Control Panel. Click on “Start”, then “Control Panel”, then choose “System and Security” and finally click on “System”. Then scroll down the page and you will come to see a section called Windows activation, which indicates “Windows is activated” and gives you the Product ID with the genuine Microsoft software logo.Windows 7

· Hi, I would like to explain that an update named Windows Activation Technologies (WAT) is released for Windows 7 system. Customer can download this update from Windows Update or Microsoft Download Center. After installing the update, the validation process will be started and it will check for over 70 known activation exploits. If any activation exploits was detected, the non-genuine notification will be displayed. The notification indicating that a copy of Windows is not genuine may occur if any of the following conditions are true: 1. A non-genuine Product Key was used to install the system and the system was activated by using activation exploit. 2. The local settings are incorrect. 3. Some third-party security software blocks access to the Windows Update site. Please be assured that the purpose of WAT is to protect the rights of genuine copy users. I will do my best to assist you in resolving this issue. Thank you for your understanding. Before moving on, please let me know how the system was activated? Is it activated from internet or by phone. Since the problem could be caused by the activation exploit, the above information will be helpful for us to determine the root cause. In addition, let’s take the following steps to test the issue. Suggestions 1: Test the issue in Clean Boot. After that, please restart the computer and validate the system again to check if the issue still persists. Suggestions 2: Run the MGA Diagnostic Tool to troubleshoot this issue =============================================== 1. Please open Internet Explorer and visit the following link to download the MGA Diagnostic Tool: http://go.microsoft.com/fwlink/?linkid=52012 2. Save the "MGADiag.exe" file to the "Desktop", and then double click on the file to run the tool. 3. Click the “Continue” button. 4. Under the “Windows” tab, click the "Resolve" button if it is highlighted. 5. Restart the computer and visit the following website to validate Windows again. http://www.microsoft.com/genuine/default.aspx?displaylang=en More information: Genuine Windows 7 Product Information However, if an error is still encountered when validating Windows, please capture a screenshot for further research: Screenshot: ========= 1. When the error appears, please press the "Print Screen" key (PrtScn) on your keyboard. 2. Click the "Start" Button, point to "All Programs", point to "Accessories" and then click "Paint". 3. In the Paint program, click the "Edit" menu, click "Paste", click the "File" menu, and click "Save", the "Save As" dialogue box will appear. Type a file name in the "File name:" box, for example: screenshot1. Note: Make sure "JPEG (*.JPG;*.JPEG;*.JPE;*.JFIF)" is selected in the "Save as type" box. Save the screenshot file to your "Desktop". 4. Please return to the "Desktop" and find the screenshot file we have saved and upload it. In order to provide more effective suggestions, please also assist me in collecting the following information. · Event Log ======================== 1. Click "Start", input "eventvwr" (without quotation marks) in the Search bar and press Enter. 2. Right click on "Application" on the left frame, choose "Save Log file As"; in the pop-up window, click to choose the Desktop icon on the left frame, input "app" in the "File name" blank, and then click “Save”. 3. Right click on "System", with the same method, save it as "sys". 4. Locate the two saved log files on the Desktop and send them to us. WGA Diagnostic Result ================ 1. Please locate the "MGADiag.exe" file we downloaded to the "Desktop" earlier 2. Double click on the file to run the tool. 3. Click the “Continue” button. 4. Under the “Windows” tab, click the "Copy" button. 5. Open an email, and paste (when editing the email, press Ctrl + V) the information collected by the tool. 6. Please upload it You can refer to the following link to upload the information: http://social.technet.microsoft.com/Forums/en-US/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65 Additionally, you may contact our Windows Genuine Advantage support via the following link, which is free of charge: https://support.microsoft.com/oas/default.aspx?gprid=9860&st=1&wfxredirect=1&sd=gn Regards, Sabrina This posting is provided "AS IS" with no warranties or guarantees, and confers no rights. |Please remember to click Mark as Answer on the post that helps you, and to click Unmark as Answer if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.