As I feared, as soon as I fired up Windows 7 32-bit for the first time I looked in services and my old friend, WLAN Autoconfig was there, and just as in Vista, disabling it causes your wireless network to drop. As a result I have a choice between not having internet, or having Skype/games/downloads/the net in general lag out horribly every 60 seconds. Linksys only provides a vanilla driver for the WMP54G for Vista, not the wireless manager you get with the XP driver (which I doubt would work in 7), and neither Wlan Optimizer or Vista anti-lag work to clear up the issue on this OS (which I figured they wouldn't). Does anyone have any ideas at all as to how I could get around this short of purchasing a 200ft ethernet cable and going wired? Does anyone happen to know of a 3rd party WLAN manager that isn't dependent on Wlan Autoconfig?

I have this very same problem with the same wireless card and Windows 7 64-bit. It's a rampant problem that lots of folks are complaining about on many forums with no fix that works for everyone out there unfortunately. I've tried the same things you have with no resolution. I've even tried the Ralink drivers with my card (they are better drivers by the way and have their own WLAN manager software as well). My wife has an MSI Turbo G wireless card that works without issue, so it has to be a combination of Windows 7/Vista and the Linksys card (although I've seen this complaint with other cards out there as well).Please, Microsoft...get rid of this "feature" in Windows! It makes gaming and video/audio streaming wirelessly useless for many people. The Linksys WMP54G is a very common card used by an awful lot of users out there...too many to overlook this issue. I've tried disabling the WLAN autoconfig and unchecking the box in my wireless configuration that allows for polling for better wireless connections, but I still get theinsane ping spikes every 60 seconds....1ms....1ms....1,500ms....1ms.....it's driving me crazy!

Wow....so many views over the past few days and no replies? Is nobody else here is having this problem?

Well, it is definitely a problem with Windows 7and the WMP54G wireless card's driver. I finally got my MSI Turbo-G Wireless Adapter last weekend. Did a fresh install of Windows 7 with the adapter physically installed in the system. Once Windows finished installing, I updated the driver for the card with the Vista 64-bit driver that can be found on MSI's website....rebooted....pulled up a command box....ping spike still there....Then, I had Windows Update search for new updates. It found a Ralink driver for my card, so I installed it. No ping spike any more! This is exactly what we did with my wife's PC, and her's doesn't have the ping spike either.So, either Windows doesn't like something with the Linksys driver, or their driver just doesn't work properly with Vista or Windows 7. Thankfully, the MSI card was only $25 at Amazon. It really shouldn't have been this painful to sort out though.... :/

Unfortunately having the same problem.Windows XP had the same problem, but all you had to do was disable wireless zero configuration,set static IPand use dlink 3rd pary lan manager.If they don't fix the wireless polling lag in Windows 7 ther will still be a lot of wireless users still stuck on XP

I keep losing my connection about several times a day. I went to the settings and changed the following settings.AP Compatibility Mode = Higher PerformanceIBSS 54g Mde = 54g PerformanceLocation = USMinimum Power Consumtion = DisabledSpeedBooster = Enabled (was disabled)XPress Technology = EnabledI'll post later today if this fixed my disconnectswin7/32WMP54G

None of the previous changes worked..All wireless settings ok..Removed drivers and defaulted to Broadcomm drivers..That did not fix the problem...The broadcomm default to b instead of g. And when I changed to g, no connection, no matter what I did..I did noticed my screen would blank once in a while....So..Turned off the Desktop background Slide Show...Odd..MY screen stopped flashing. AND My wireless held for over 9 hrs. Rebooted pc held for over 6 hrs...Rebooted again and got strainght connection for over 3 hrs..

Catamount1412, would you please do the following:1)Open cmd.exe2) Run the command: netsh wlan show all3) Copy and paste theentire output (it can be long)into your replyThanks,Alok ManchandaMicrosoft Corporation

Here's the info.What I did since my last post..Reloaded w7.Also made the changes per this article to the Broadcast Flag. So far no disconnects in 4 plus days...http://support.microsoft.com/default.aspx/kb/928233/en-usDid not post any results. I want to be sure this took care of the issue...Thanks..Microsoft Windows [Version 6.1.7100]Copyright (c) 2009 Microsoft Corporation. All rights reserved. C:\Users\Chinino>netsh wlan show allWireless System Information Summary(Time: 5/23/2009 6:15:10 AM Eastern Daylight Time) ===================================================================================================== SHOW DRIVERS ================================================================================================== Interface name: Wireless Network Connection Driver : Broadcom 802.11g Network Adapter Vendor : Broadcom Provider : Microsoft Date : 10/1/2008 Version : 4.176.75.23 INF file : C:\Windows\INF\oem2.inf Files : 2 total C:\Windows\system32\DRIVERS\BCMWL6.SYS C:\Windows\system32\drivers\vwifibus.sys Type : Native Wi-Fi Driver Radio types supported : 802.11g 802.11b FIPS 140-2 mode supported : No Hosted network supported : Yes Authentication and cipher supported in infrastructure mode: Open None Open WEP Shared None Shared WEP WPA2-Enterprise TKIP WPA2-Personal TKIP WPA2-Enterprise CCMP WPA2-Personal CCMP WPA-Enterprise TKIP WPA-Personal TKIP WPA-Enterprise CCMP WPA-Personal CCMP Authentication and cipher supported in ad-hoc mode: WPA2-Personal CCMP Open None Open WEP ==================================================================================================== SHOW INTERFACES ================================================================================================ There is 1 interface on the system: Name : Wireless Network Connection Description : Broadcom 802.11g Network Adapter #2 GUID : 12d643fd-da39-4b11-9282-afe27b528c2c Physical address : 00:xxxx State : connected SSID : linksyssssssssssss BSSID :xxxxx Network type : Infrastructure Radio type : 802.11g Authentication : WPA2-Personal Cipher : CCMP Connection mode : Auto Connect Channel : 11 Receive rate (Mbps) : 54 Transmit rate (Mbps) : 54 Signal : 94% Profile : linksyssssssss Hosted network status : Not available ================================================================================================== SHOW HOSTED NETWORK ============================================================================================== Hosted network settings----------------------- Mode : Allowed Settings : <Not configured> Hosted network status--------------------- Status : Not available ==================================================================================================== SHOW SETTINGS ================================================================================================== Wireless LAN settings--------------------- Show blocked networks in visible network list: No Only use GP profiles on GP-configured networks: No Hosted network mode allowed in WLAN service: Yes Allow shared user credentials for network authentication: Yes Block period: Not Configured. Auto configuration logic is enabled on interface "Wireless Network Connection" ===================================================================================================== SHOW FILTERS ================================================================================================== Allow list on the system (group policy)--------------------------------------- <None> Allow list on the system (user)------------------------------- <None> Block list on the system (group policy)--------------------------------------- <None> Block list on the system (user)------------------------------- <None> ================================================================================================== SHOW CREATEALLUSER =============================================================================================== Everyone is allowed to create all user profiles. ==================================================================================================== SHOW PROFILES ================================================================================================== Profiles on interface Wireless Network Connection: Group policy profiles (read only)--------------------------------- <None> User profiles------------- All User Profile : linksyssssssss ================================================================================================= SHOW PROFILES NAME=* ============================================================================================== Profile linksys_SES_14430 on interface Wireless Network Connection:======================================================================= Applied: All User Profile Profile information------------------- Version : 1 Type : Wireless LAN Name : linkssssssss Control options : Connection mode : Connect automatically Network broadcast : Connect even if this network is not broadcasting AutoSwitch : Do not switch to other networks Connectivity settings--------------------- Number of SSIDs : 1 SSID name : "linksysssssssss" Network type : Infrastructure Radio type : [ Any Radio Type ] Vendor extension : Not present Security settings----------------- Authentication : WPA2-Personal Cipher : CCMP FIPS mode : Disabled Security key : Present ============================================================================================== SHOW NETWORKS MODE=BSSID ============================================================================================= Interface name : Wireless Network ConnectionThere are 1 networks currently visible. SSID 1 : linksys_SES_14430 Network type : Infrastructure Authentication : WPA2-Personal Encryption : CCMP BSSID 1 :xxxxxxx Signal : 83% Radio type : 802.11g Channel : 11 Basic rates (Mbps) : 1 2 5.5 6 9 11 12 18 24 36 48 54 C:\Users\Chinino>

Chinio, you are using the latest driver for your device so you should not see wireless connectivity drops any further. Thanks, Alok Manchanda Microsoft Corporation

Is there a way to hide the other visible wireless connections so that wlan autoconfig does not try to reconnect with a better network every 60 seconds? :|What is the name of the registry that sets the value for how often it is to this?Alok, it is windows vista and its silly wlan autconfig reconnect every 60 seconds, is there a fix for this!?Or does it have something to with packet buffering or TTL of packets? possibly DTIM? HELP PLEASE! :|

Hello Guys, As Scott D, i would like to know if there is a solution regarding to hide other visible wireless connections so that wlan autoconfig does not try to reconnect with a better network every 60 seconds ? Since i have installed Windows 7 and play online games via Wifi connection, every minutes my ping is growing up till 400 - or 900 ms. ( FYI i have switched from XP to 7 ). It's pretty bad for me because, i can't play online games anymore. Everything is fine and then, i am getting my ping likes 300ms, 800ms, 250ms, 40ms 40ms 40ms, pretty ennoying. I tested : Wlan Optimizer but it doesn't work at all. To resume, i do not understand why, when i am doing a " ping -t www.google.com " every minutes my ping is spiking to 300ms instead of 30 - 40ms ? I have a broadcom wifi card. Sincerely, Vincent.

I recently upgraded to Windows 7 Home premium from Vista. I am having the same problem with my ping intermittently rising while playing games. I am connecting to servers that originally had low pings to my connection. Now I cannot do any online gaming. This seems like it's been a problem for a long time and has not been resolved or is even being looked into. I may rollback to Vista at this rate.

Of course this hasn't been fixed, because Windows 7 isnt using the Wireless Zero Configuration like Windows XP.Its because Windows 7is scouting for available wireless points every 30 - 60 secs which causethe spikes.If I could find a wireless card who's software supports Windows 7 I could turn off the WLAN AutoConfig and use the 3rd party tool to configure network settings.If you disable WLAN AutoConfig you disable network conectivity.I solved this problem by using a 5 metre network cable :( only solution.

In Win7, if you don't wantWLAN AutoConfig to search for more preferred networks, which may result in lag or ping spike, you can do the following.1. Right click the WLANnetwork that is currently connected and select "Properties". Alternatively, you can open "Network and Sharing Center", click "Manage wireless networks", and double click the WLAN network that is currently connected.2. A dialog will pop up. In the "Connection" tab, uncheck "Connect to a more preferred network if available".3. Click "OK" to save the changes.If you are still expericing the same issue after the above changes, please open a command window and run "netsh wlan show all",then post the entire output in your reply.Thanks,Yi

Same problem for me, haven't been able to fix this with any of the solutions in this thread: Microsoft Windows [Version 6.1.7100] Copyright (c) 2009 Microsoft Corporation. All rights reserved. C:\Users\Wouter>netsh wlan show all Wireless System Information Summary (Time: 6-11-2009 15:36:56 W. Europe Standard Time) ======================================================================= ============================== SHOW DRIVERS =========================== ======================================================================= Interface name: Wireless Network Connection Driver : Wireless-G Business USB Network Adapter Vendor : Linksys, A Division of Cisco Systems, Inc. Provider : Ralink Technology Corp. Date : 28-9-2006 Version : 3.0.1.0 INF file : C:\Windows\INF\oem2.inf Files : 1 total C:\Windows\system32\DRIVERS\netr7364.sys Type : Native Wi-Fi Driver Radio types supported : 802.11g FIPS 140-2 mode supported : Yes Hosted network supported : No Authentication and cipher supported in infrastructure mode: Open None Open WEP-40bit Shared WEP-40bit Open WEP-104bit Shared WEP-104bit Open WEP Shared WEP WPA-Enterprise TKIP WPA-Personal TKIP WPA2-Enterprise TKIP WPA2-Personal TKIP WPA-Enterprise CCMP WPA-Personal CCMP WPA2-Enterprise CCMP WPA2-Personal CCMP Authentication and cipher supported in ad-hoc mode: Open None Open WEP-40bit Open WEP-104bit Open WEP WPA2-Personal CCMP ======================================================================= ============================= SHOW INTERFACES ========================= ======================================================================= There is 1 interface on the system: Name : Wireless Network Connection Description : Wireless-G Business USB Network Adapter GUID : 44049ea0-0b1b-4754-80cf-2b421c8fe826 Physical address : 00:xxxx State : connected SSID : Eminent BSSID : 00:xxxx Network type : Infrastructure Radio type : 802.11g Authentication : Open Cipher : WEP Connection mode : Auto Connect Channel : 7 Receive rate (Mbps) : 11 Transmit rate (Mbps) : 11 Signal : 70% Profile : Eminent Hosted network status : Not available ======================================================================= =========================== SHOW HOSTED NETWORK ======================= ======================================================================= Hosted network settings ----------------------- Mode : Allowed Settings : <Not configured> Hosted network status --------------------- Status : Not available ======================================================================= ============================= SHOW SETTINGS =========================== ======================================================================= Wireless LAN settings --------------------- Show blocked networks in visible network list: No Only use GP profiles on GP-configured networks: No Hosted network mode allowed in WLAN service: Yes Allow shared user credentials for network authentication: Yes Block period: Not Configured. Auto configuration logic is enabled on interface "Wireless Network Connectio n" ======================================================================= ============================== SHOW FILTERS =========================== ======================================================================= Allow list on the system (group policy) --------------------------------------- <None> Allow list on the system (user) ------------------------------- <None> Block list on the system (group policy) --------------------------------------- <None> Block list on the system (user) ------------------------------- <None> ======================================================================= =========================== SHOW CREATEALLUSER ======================== ======================================================================= Everyone is allowed to create all user profiles. ======================================================================= ============================= SHOW PROFILES =========================== ======================================================================= Profiles on interface Wireless Network Connection: Group policy profiles (read only) --------------------------------- <None> User profiles ------------- All User Profile : Eminent ======================================================================= ========================== SHOW PROFILES NAME=* ======================= ======================================================================= Profile Eminent on interface Wireless Network Connection: ======================================================================= Applied: All User Profile Profile information ------------------- Version : 1 Type : Wireless LAN Name : Eminent Control options : Connection mode : Connect automatically Network broadcast : Connect only if this network is broadcasting AutoSwitch : Do not switch to other networks Connectivity settings --------------------- Number of SSIDs : 1 SSID name : "Eminent" Network type : Infrastructure Radio type : [ Any Radio Type ] Vendor extension : Not present Security settings ----------------- Authentication : Open Cipher : WEP Security key : Present Key Index : 1 ======================================================================= ======================= SHOW NETWORKS MODE=BSSID ====================== ======================================================================= Interface name : Wireless Network Connection There are 1 networks currently visible. SSID 1 : Eminent Network type : Infrastructure Authentication : Open Encryption : WEP BSSID 1 : 00:xxxx Signal : 96% Radio type : 802.11b Channel : 7 Basic rates (Mbps) : 1 2 5.5 11 C:\Users\Wouter>

Same problem, none of the solutions work for me. In addition I have tried this: netsh wlan set autoconfig enabled=no interface="Wireless Network Connection" Which some forums and sites have suggested, but I had no luck. Very aggravating feature, that seems so simple to fix. I figure if we could find the registry value that indicates how long it waits before it checks for a new network we could fix this. Anyways here is my summary. Wireless System Information Summary (Time: 11/26/2009 9:52:02 PM Eastern Standard Time) ======================================================================= ============================== SHOW DRIVERS =========================== ======================================================================= Interface name: Wireless Network Connection Driver : Linksys Wireless-G PCI Adapter Vendor : Linksys, A Division of Cisco Systems, Inc. Provider : Linksys, A Division of Cisco Systems, Inc. Date : 12/11/2006 Version : 2.0.3.0 INF file : C:\Windows\INF\oem2.inf Files : 1 total C:\Windows\system32\DRIVERS\WMP54Gv41x64.sys Type : Native Wi-Fi Driver Radio types supported : 802.11b 802.11g FIPS 140-2 mode supported : Yes Hosted network supported : No Authentication and cipher supported in infrastructure mode: Open None Open WEP-40bit Shared WEP-40bit Open WEP-104bit Shared WEP-104bit Open WEP Shared WEP WPA-Enterprise TKIP WPA-Personal TKIP WPA2-Enterprise TKIP WPA2-Personal TKIP WPA-Enterprise CCMP WPA-Personal CCMP WPA2-Enterprise CCMP WPA2-Personal CCMP Authentication and cipher supported in ad-hoc mode: Open None Open WEP-40bit Open WEP-104bit Open WEP WPA2-Personal CCMP ======================================================================= ============================= SHOW INTERFACES ========================= ======================================================================= There is 1 interface on the system: Name : Wireless Network Connection Description : Linksys Wireless-G PCI Adapter GUID : a9e8fdcc-0b37-4cf3-b9df-b3cc55889d3f Physical address : 00:1e:e5:a5:81:68 State : connected SSID : 06B401312575 BSSID : 00:12:0e:17:46:0a Network type : Infrastructure Radio type : 802.11g Authentication : Open Cipher : None Connection mode : Auto Connect Channel : 6 Receive rate (Mbps) : 54 Transmit rate (Mbps) : 54 Signal : 100% Profile : 06B401312575 Hosted network status : Not available ======================================================================= =========================== SHOW HOSTED NETWORK ======================= ======================================================================= Hosted network settings ----------------------- Mode : Allowed SSID name : "PAUL-PC-35460" Max number of clients : 100 Authentication : WPA2-Personal Cipher : CCMP Hosted network status --------------------- Status : Not available ======================================================================= ============================= SHOW SETTINGS =========================== ======================================================================= Wireless LAN settings --------------------- Show blocked networks in visible network list: No Only use GP profiles on GP-configured networks: No Hosted network mode allowed in WLAN service: Yes Allow shared user credentials for network authentication: Yes Block period: Not Configured. Auto configuration logic is enabled on interface "Wireless Network Connectio n" ======================================================================= ============================== SHOW FILTERS =========================== ======================================================================= Allow list on the system (group policy) --------------------------------------- Allow list on the system (user) ------------------------------- Block list on the system (group policy) --------------------------------------- Block list on the system (user) ------------------------------- ======================================================================= =========================== SHOW CREATEALLUSER ======================== ======================================================================= Everyone is allowed to create all user profiles. ======================================================================= ============================= SHOW PROFILES =========================== ======================================================================= Profiles on interface Wireless Network Connection: Group policy profiles (read only) --------------------------------- User profiles ------------- All User Profile : 06B401312575 All User Profile : Home ======================================================================= ========================== SHOW PROFILES NAME=* ======================= ======================================================================= Profile 06B401312575 on interface Wireless Network Connection: ======================================================================= Applied: All User Profile Profile information ------------------- Version : 1 Type : Wireless LAN Name : 06B401312575 Control options : Connection mode : Connect automatically Network broadcast : Connect only if this network is broadcasting AutoSwitch : Do not switch to other networks Connectivity settings --------------------- Number of SSIDs : 1 SSID name : "06B401312575" Network type : Infrastructure Radio type : [ Any Radio Type ] Vendor extension : Not present Security settings ----------------- Authentication : Open Cipher : None Security key : Absent Key Index : 1 Profile Home on interface Wireless Network Connection: ======================================================================= Applied: All User Profile Profile information ------------------- Version : 1 Type : Wireless LAN Name : Home Control options : Connection mode : Connect manually Network broadcast : Connect only if this network is broadcasting AutoSwitch : Do not switch to other networks Connectivity settings --------------------- Number of SSIDs : 1 SSID name : "Home" Network type : Infrastructure Radio type : [ Any Radio Type ] Vendor extension : Not present Security settings ----------------- Authentication : Open Cipher : WEP Security key : Present Key Index : 1 ======================================================================= ======================= SHOW NETWORKS MODE=BSSID ====================== ======================================================================= Interface name : Wireless Network Connection There are 2 networks currently visible. SSID 1 : 06B401312575 Network type : Infrastructure Authentication : Open Encryption : None BSSID 1 : 00:12:0e:17:46:0a Signal : 100% Radio type : 802.11g Channel : 6 Basic rates (Mbps) : 1 2 5.5 11 Other rates (Mbps) : 6 9 12 18 22 24 36 48 54 SSID 2 : linksys Network type : Infrastructure Authentication : Open Encryption : None BSSID 1 : 00:16:b6:b2:48:99 Signal : 26% Radio type : 802.11g Channel : 6 Basic rates (Mbps) : 1 2 5.5 11 Other rates (Mbps) : 6 9 12 18 24 36 48 54

How do you enable the wireless autoconfig? netsh wlan>show allWireless System Information Summary(Time: 12/21/2009 2:42:54 PM Central Standard Time) ===================================================================================================== SHOW DRIVERS ================================================================================================== The Wireless AutoConfig Service (wlansvc) is not running. ==================================================================================================== SHOW INTERFACES ================================================================================================ The Wireless AutoConfig Service (wlansvc) is not running. ================================================================================================== SHOW HOSTED NETWORK ============================================================================================== The Wireless AutoConfig Service (wlansvc) is not running. ==================================================================================================== SHOW SETTINGS ================================================================================================== The Wireless AutoConfig Service (wlansvc) is not running. ===================================================================================================== SHOW FILTERS ================================================================================================== The Wireless AutoConfig Service (wlansvc) is not running. ================================================================================================== SHOW CREATEALLUSER =============================================================================================== ==================================================================================================== SHOW PROFILES ================================================================================================== The Wireless AutoConfig Service (wlansvc) is not running. ================================================================================================= SHOW PROFILES NAME=* ============================================================================================== The Wireless AutoConfig Service (wlansvc) is not running. ============================================================================================== SHOW NETWORKS MODE=BSSID =============================================================================================

Do you have a working wireless card installed???under servicesWLAN Autoconfig should be set to automatic if not you can change it there.

Here is what I got I am using a wireless N adapter and router works great as far as speed and connection but like everybody else I am getting the lag spike every minute or so. Sometimes it will go longer without a spike other times its bad enough to time out the server (I play cod4 MW2) I have already unchecked the box that says "Connect to a more preferred network if available". Let me know if there is any other solution thanks. C:\Users\BRANDON>netsh wlan show all Wireless System Information Summary (Time: 1/18/2010 11:18:21 AM Eastern Standard Time) ======================================================================= ============================== SHOW DRIVERS =========================== ======================================================================= Interface name: Wireless Network Connection Driver : Belkin F5D8053 N Wireless USB Adapter Vendor : Belkin Corporation Provider : Ralink Date : 8/15/2007 Version : 2.1.0.0 INF file : C:\Windows\INF\oem1.inf Files : 1 total C:\Windows\system32\DRIVERS\netr28ux.sys Type : Native Wi-Fi Driver Radio types supported : 802.11b 802.11g FIPS 140-2 mode supported : Yes Hosted network supported : No Authentication and cipher supported in infrastructure mode: Open None Open WEP-40bit Open WEP-104bit Open WEP Shared WEP-40bit Shared WEP-104bit Shared WEP WPA-Enterprise TKIP WPA-Enterprise CCMP WPA-Personal TKIP WPA-Personal CCMP WPA2-Enterprise TKIP WPA2-Enterprise CCMP WPA2-Personal TKIP WPA2-Personal CCMP Authentication and cipher supported in ad-hoc mode: Open None Open WEP-40bit Open WEP-104bit Open WEP WPA2-Personal CCMP ======================================================================= ============================= SHOW INTERFACES ========================= ======================================================================= There is 1 interface on the system: Name : Wireless Network Connection Description : Belkin F5D8053 N Wireless USB Adapter GUID : feaa6330-559a-42aa-bfee-360bbff11d5b Physical address : 00:1c:df:69:32:9f State : connected SSID : trujillo BSSID : 00:22:75:52:9c:18 Network type : Infrastructure Radio type : 802.11b Authentication : Open Cipher : None Connection mode : Auto Connect Channel : 8 Receive rate (Mbps) : 412316.9 Transmit rate (Mbps) : 412316.9 Signal : 68% Profile : trujillo Hosted network status : Not available ======================================================================= =========================== SHOW HOSTED NETWORK ======================= ======================================================================= Hosted network settings ----------------------- Mode : Allowed Settings : <Not configured> Hosted network status --------------------- Status : Not available ======================================================================= ============================= SHOW SETTINGS =========================== ======================================================================= Wireless LAN settings --------------------- Show blocked networks in visible network list: No Only use GP profiles on GP-configured networks: No Hosted network mode allowed in WLAN service: Yes Allow shared user credentials for network authentication: Yes Block period: Not Configured. Auto configuration logic is enabled on interface "Wireless Network Connectio n" ======================================================================= ============================== SHOW FILTERS =========================== ======================================================================= Allow list on the system (group policy) --------------------------------------- <None> Allow list on the system (user) ------------------------------- <None> Block list on the system (group policy) --------------------------------------- <None> Block list on the system (user) ------------------------------- <None> ======================================================================= =========================== SHOW CREATEALLUSER ======================== ======================================================================= Everyone is allowed to create all user profiles. ======================================================================= ============================= SHOW PROFILES =========================== ======================================================================= Profiles on interface Wireless Network Connection: Group policy profiles (read only) --------------------------------- <None> User profiles ------------- All User Profile : trujillo 2 3 All User Profile : trujillo 2 All User Profile : trujillo ======================================================================= ========================== SHOW PROFILES NAME=* ======================= ======================================================================= Profile trujillo 2 3 on interface Wireless Network Connection: ======================================================================= Applied: All User Profile Profile information ------------------- Version : 1 Type : Wireless LAN Name : trujillo 2 3 Control options : Connection mode : Connect automatically Network broadcast : Connect even if this network is not broadcasting AutoSwitch : Do not switch to other networks Connectivity settings --------------------- Number of SSIDs : 1 SSID name : "trujillo" Network type : Infrastructure Radio type : [ Any Radio Type ] Vendor extension : Not present Security settings ----------------- Authentication : WPA2-Personal Cipher : CCMP FIPS mode : Disabled Security key : Present Profile trujillo 2 on interface Wireless Network Connection: ======================================================================= Applied: All User Profile Profile information ------------------- Version : 1 Type : Wireless LAN Name : trujillo 2 Control options : Connection mode : Connect automatically Network broadcast : Connect only if this network is broadcasting AutoSwitch : Do not switch to other networks Connectivity settings --------------------- Number of SSIDs : 1 SSID name : "trujillo" Network type : Infrastructure Radio type : [ Any Radio Type ] Vendor extension : Not present Security settings ----------------- Authentication : WPA2-Personal Cipher : CCMP Security key : Present Profile trujillo on interface Wireless Network Connection: ======================================================================= Applied: All User Profile Profile information ------------------- Version : 1 Type : Wireless LAN Name : trujillo Control options : Connection mode : Connect automatically Network broadcast : Connect even if this network is not broadcasting AutoSwitch : Do not switch to other networks Connectivity settings --------------------- Number of SSIDs : 1 SSID name : "trujillo" Network type : Infrastructure Radio type : [ Any Radio Type ] Vendor extension : Not present Security settings ----------------- Authentication : Open Cipher : None Security key : Absent Key Index : 1 ======================================================================= ======================= SHOW NETWORKS MODE=BSSID ====================== ======================================================================= Interface name : Wireless Network Connection There are 1 networks currently visible. SSID 1 : trujillo Network type : Infrastructure Authentication : Open Encryption : None BSSID 1 : 00:22:75:52:9c:18 Signal : 70% Radio type : 802.11n Channel : 8 Basic rates (Mbps) : 1 2 5.5 11 Other rates (Mbps) : 6 9 12 18 24 36 48 54 C:\Users\BRANDON>

im experiencing lag spikes on vista when using wireless as well Let me know if there is any other solution thanks. P.S. I'm from the Netherlands so the language is Dutch hope this is not a problem :s Microsoft Windows [versie 6.0.6002] Copyright (c) 2006 Microsoft Corporation. Alle rechten voorbehouden. C:\Users\Verstralen>netsh wlan show all Samenvatting van gegevens van draadloos systeem (Tijd: 12-6-2010 11:51:14) ======================================================================= ============================== STUURPROGRAMMA'S WEERGEVEN ====================== ===== ======================================================================= Interfacenaam: Draadloze netwerkverbinding Stuurprogramma : Linksys Wireless-G PCI Adapter Leverancier : Linksys, A Division of Cisco Systems, Inc. Provider : Linksys, A Division of Cisco Systems, Inc. Datum : 11-12-2006 Versie : 2.0.3.0 INF-bestand : C:\Windows\INF\oem2.inf Bestanden : 1 totaal C:\Windows\system32\DRIVERS\WMP54Gv41x86.sys Type : Native Wi-Fi-stuurprogramma IHV-service aanwezig : 802.11b 802.11g Modus FIPS 140-2 ondersteund : Ja Verificatie en coderingsmethode ondersteund in infrastructuurmodus: Open Geen Open WEP-40bit Gedeeld WEP-40bit Open WEP-104-bits Gedeeld WEP-104-bits Open WEP Gedeeld WEP WPA-Enterprise TKIP WPA-Personal TKIP WPA2-Enterprise TKIP WPA2-Personal TKIP WPA-Enterprise CCMP WPA-Personal CCMP WPA2-Enterprise CCMP WPA2-Personal CCMP Verificatie en coderingsmethode ondersteund in ad-hocmodus: Open Geen Open WEP-40bit Open WEP-104-bits Open WEP WPA2-Personal CCMP ======================================================================= ============================= INTERFACES WEERGEVEN ========================= ======================================================================= Er is 1 interface in het systeem: Naam : Draadloze netwerkverbinding Beschrijving : Linksys Wireless-G PCI Adapter GUID : bfe4558a-0d2e-48cd-ada3-a9173fc4ba0a Fysiek adres : 00:25:9c:74:5f:e9 Status : verbonden SSID : ThomsonC08F6D BSSID : 00:18:f6:ea:eb:01 Netwerktype : Infrastructuur Radiotype : 802.11g Verificatie : WPA2-Personal Coderingsmethode : CCMP Verbindingsmodus : Automatisch verbinden Kanaal : 6 Ontvangstsnelheid (Mbps) : 54 Verzendsnelheid (Mbps) : 54 Signaal : 47% Profiel : ThomsonC08F6D ======================================================================= ============================= INSTELLINGEN WEERGEVEN =========================== ======================================================================= Instellingen voor draadloos LAN-netwerk --------------------------------------- Geblokkeerde netwerken weergeven in lijst met detecteerbare netwerken: Nee Alleen groepsbeleidprofielen gebruiken op netwerken die zijn geconfigureerd voor groepsbeleid: Nee Logica voor automatische configuratie is Ingeschakeld op interface 'Draadloz e netwerkverbinding'. ======================================================================= ============================== FILTERS WEERGEVEN =========================== ======================================================================= Lijst Toestaan in het systeem (groepsbeleid) -------------------------------------------- <geen> Lijst Toestaan in het systeem (gebruiker) ----------------------------------------- <geen> Lijst Blokkeren in het systeem (groepsbeleid) --------------------------------------------- <geen> Lijst Blokkeren in het systeem (gebruiker) ------------------------------------------ <geen> ======================================================================= =========================== SHOW CREATEALLUSER ======================== ======================================================================= Iedereen mag alle gebruikersprofielen maken. ======================================================================= ============================= PROFIELEN WEERGEVEN =========================== ======================================================================= Profielen op interface Draadloze netwerkverbinding: Groepsbeleidsprofielen (alleen-lezen) --------------------------------- <Geen> Gebruikersprofielen ------------- Alle gebruikersprofielen : ThomsonC08F6D Alle gebruikersprofielen : Verstralen ======================================================================= ========================== PROFIELEN WEERGEVEN NAAM=* ======================= ======================================================================= Profiel ThomsonC08F6D op interface Draadloze netwerkverbinding: ======================================================================= Toegepast: Alle gebruikersprofielen Profielgegevens --------------- Versie : 1 Type : Draadloos LAN Naam : ThomsonC08F6D Besturingsopties : Verbindingsmodus : automatisch verbinding maken Netwerk-broadcast : alleen verbinding maken als dit netwerk uitzendt AutoSwitch : indien mogelijk overschakelen naar netwerk met hoge re prioriteit Verbindingsinstellingen ----------------------- Aantal SSID's : 1 SSID-naam : "ThomsonC08F6D" Netwerktype : Infrastructuur Radiotype : [ Alle typen netwerken ] Leveranciersextensie : niet aanwezig Beveiligingsinstellingen ------------------------ Verificatie : WPA2-Personal Cipher : CCMP Beveiligingssleutel : Aanwezig Profiel Verstralen op interface Draadloze netwerkverbinding: ======================================================================= Toegepast: Alle gebruikersprofielen Profielgegevens --------------- Versie : 1 Type : Draadloos LAN Naam : Verstralen Besturingsopties : Verbindingsmodus : handmatig verbinding maken Netwerk-broadcast : alleen verbinding maken als dit netwerk uitzendt AutoSwitch : niet naar andere netwerken schakelen Verbindingsinstellingen ----------------------- Aantal SSID's : 1 SSID-naam : "Verstralen" Netwerktype : Infrastructuur Radiotype : [ Alle typen netwerken ] Leveranciersextensie : niet aanwezig Beveiligingsinstellingen ------------------------ Verificatie : WPA-Personal Cipher : TKIP Beveiligingssleutel : Aanwezig ======================================================================= ======================= NETWERKEN WEERGEVEN MODUS=BSSID ====================== ======================================================================= Interfacenaam : Draadloze netwerkverbinding Er zijn momenteel 4 netwerken detecteerbaar. SSID 1 : Thomson261A65 Netwerktype : Infrastructuur Verificatie : WPA2-Personal Versleuteling : CCMP BSSID 1 : 00:18:f6:f2:73:a3 Signaal : 42% Radiotype : 802.11g Kanaal : 1 Basissnelheden (Mbps) : 1 2 5.5 11 Overige snelheden (Mbps) : 6 9 12 18 24 36 48 54 SSID 2 : omnicron Netwerktype : Infrastructuur Verificatie : WPA-Personal Versleuteling : TKIP BSSID 1 : 00:1e:e5:92:be:56 Signaal : 47% Radiotype : 802.11g Kanaal : 6 Basissnelheden (Mbps) : 1 2 5.5 11 Overige snelheden (Mbps) : 6 9 12 18 24 36 48 54 SSID 3 : ThomsonC08F6D Netwerktype : Infrastructuur Verificatie : WPA2-Personal Versleuteling : CCMP BSSID 1 : 00:18:f6:ea:eb:01 Signaal : 52% Radiotype : 802.11g Kanaal : 6 Basissnelheden (Mbps) : 1 2 5.5 11 Overige snelheden (Mbps) : 6 9 12 18 24 36 48 54 SSID 4 : TI-AR7WRD Netwerktype : Infrastructuur Verificatie : WPA-Personal Versleuteling : TKIP BSSID 1 : 00:09:f3:0f:5d:b2 Signaal : 18% Radiotype : 802.11g Kanaal : 11 Basissnelheden (Mbps) : 1 2 5.5 11 Overige snelheden (Mbps) : 0 6 9 12 18 24 36 48 54 C:\Users\Verstralen>

I just fixed this problem. 1. Open Cmd.exe with run as administrator 2. Then type in command : netsh wlan set autoconfig enable=no interface="Wireless Network Connection" 3. Press Enter There u go, it's fixed. Hope this will help :)

Guys, I am not sure for Windows 7 but got the same issue with WLAN card on Server 2008 Enterprise. There is no WLAN Autoconfig in services.msc.This can be fixed by installing Wireless LAN Service Feature from Server Manager. Cheers!! Asif Parvez