Wireless network not working after Sleep
Windows always had problems with sleep, mostly with nvidia drivers, i have the same as you in a Dell XPS 630i and my mouse was froxen most of the time after i got out of sleep caused by the nvidia drivers.With windows 7 i put it to sleep 4 times without problems, if you do a "sigverif" it will give you the drivers causing problems.Claude
January 17th, 2009 6:58am

Windows always had problems with sleep, mostly with nvidia drivers, i have the same as you in a Dell XPS 630i and my mouse was froxen most of the time after i got out of sleep caused by the nvidia drivers.With windows 7 i put it to sleep 4 times without problems, if you do a "sigverif" it will give you the drivers causing problems.Claude
Free Windows Admin Tool Kit Click here and download it now
January 17th, 2009 6:58am

Your video card has nothing to do with this. It is likely your network card drivers that are having a tizzy fit when windows comes back from stand by mode. My daughter has a Dell Inspiron 1525 and the Dell wireless card every since I updated my router's firmware to support WPA2, will now lose it's connection after returning from stand by or hibernation.My other two notebooks are running Windows 7, one has a Linksys Wireless WPC54G card and it does not have the issue, the other is and HP notebook with aIntel Wireless WiFi Link 4965AG, and it does not have any issues with the stand by recovery or hibernation as well.I would check to make sure you have a current driver for the wireless card, or at least check through the change logs or release notes on other releases of drivers for your card to see if anything like that is mentioned.Shon
January 17th, 2009 11:53am

Your video card has nothing to do with this. It is likely your network card drivers that are having a tizzy fit when windows comes back from stand by mode. My daughter has a Dell Inspiron 1525 and the Dell wireless card every since I updated my router's firmware to support WPA2, will now lose it's connection after returning from stand by or hibernation.My other two notebooks are running Windows 7, one has a Linksys Wireless WPC54G card and it does not have the issue, the other is and HP notebook with aIntel Wireless WiFi Link 4965AG, and it does not have any issues with the stand by recovery or hibernation as well.I would check to make sure you have a current driver for the wireless card, or at least check through the change logs or release notes on other releases of drivers for your card to see if anything like that is mentioned.Shon
Free Windows Admin Tool Kit Click here and download it now
January 17th, 2009 11:53am

Hi All,My wireless network does not work and even the worse, it does not even get listed in theAvailable Networks after a Sleep. I have to restart my computerto get connected to mywireless network. I am not sure how to troubleshoot this issue.May be its my nVidia Video Card creating problems? - My video card - NVidia GeForce 9800 GT (Prerelease - WDDM 1.1)Regards,C.C.Chakkaradeep
January 17th, 2009 2:33pm

Windows always had problems with sleep, mostly with nvidia drivers, i have the same as you in a Dell XPS 630i and my mouse was froxen most of the time after i got out of sleep caused by the nvidia drivers.With windows 7 i put it to sleep 4 times without problems, if you do a "sigverif" it will give you the drivers causing problems.Claude
Free Windows Admin Tool Kit Click here and download it now
January 17th, 2009 2:58pm

Your video card has nothing to do with this. It is likely your network card drivers that are having a tizzy fit when windows comes back from stand by mode. My daughter has a Dell Inspiron 1525 and the Dell wireless card every since I updated my router's firmware to support WPA2, will now lose it's connection after returning from stand by or hibernation.My other two notebooks are running Windows 7, one has a Linksys Wireless WPC54G card and it does not have the issue, the other is and HP notebook with aIntel Wireless WiFi Link 4965AG, and it does not have any issues with the stand by recovery or hibernation as well.I would check to make sure you have a current driver for the wireless card, or at least check through the change logs or release notes on other releases of drivers for your card to see if anything like that is mentioned.Shon
January 17th, 2009 7:53pm

I have the same problem on an Alienware 5900. It also occurs on the Vista install I had on there previously (even though Alienware claims it's "Certified for Vista" - that's a farce). I have the latest network drivers installed. I'm not sure where the problem lies (though my guess is Alienware/Dell's lack of driver support), but one thing is clear - the upgrade to Windows 7 didn't solve any issues I have with the laptop (if anything, the upgrade has introduced more problems). -- Kevin
Free Windows Admin Tool Kit Click here and download it now
May 21st, 2009 11:49am

I have the same problem on an Alienware 5900. It also occurs on the Vista install I had on there previously (even though Alienware claims it's "Certified for Vista" - that's a farce). I have the latest network drivers installed. I'm not sure where the problem lies (though my guess is Alienware/Dell's lack of driver support), but one thing is clear - the upgrade to Windows 7 didn't solve any issues I have with the laptop (if anything, the upgrade has introduced more problems). -- Kevin
May 21st, 2009 11:49am

I have the same problem on an Alienware 5900. It also occurs on the Vista install I had on there previously (even though Alienware claims it's "Certified for Vista" - that's a farce). I have the latest network drivers installed. I'm not sure where the problem lies (though my guess is Alienware/Dell's lack of driver support), but one thing is clear - the upgrade to Windows 7 didn't solve any issues I have with the laptop (if anything, the upgrade has introduced more problems). -- Kevin
Free Windows Admin Tool Kit Click here and download it now
May 21st, 2009 6:49pm

Having the same problem on my home-built tower, but with ethernet connection, not wireless. And when I try to restart, the computer hangs at "Shutting Down" message, so that I have to manually press the restart button on my box. Once restarted, all is well until next standby.My machine:M/board; Asus P5KPL-CM2GIGs DDR800 ramNvidia 8600 Graphic cardCPU:Intel E8400.Dual-boot system with Windows XP Service Pack 3.
May 22nd, 2009 8:03am

Having the same problem on my home-built tower, but with ethernet connection, not wireless. And when I try to restart, the computer hangs at "Shutting Down" message, so that I have to manually press the restart button on my box. Once restarted, all is well until next standby.My machine:M/board; Asus P5KPL-CM2GIGs DDR800 ramNvidia 8600 Graphic cardCPU:Intel E8400.Dual-boot system with Windows XP Service Pack 3.
Free Windows Admin Tool Kit Click here and download it now
May 22nd, 2009 8:03am

Having the same problem on my home-built tower, but with ethernet connection, not wireless. And when I try to restart, the computer hangs at "Shutting Down" message, so that I have to manually press the restart button on my box. Once restarted, all is well until next standby.My machine:M/board; Asus P5KPL-CM2GIGs DDR800 ramNvidia 8600 Graphic cardCPU:Intel E8400.Dual-boot system with Windows XP Service Pack 3.
May 22nd, 2009 3:03pm

Please run Windows Update and confirm that you are running the latest updates for your wireless network adapters. If you have the latest updates and you are still seeing problems, please reply with: --- make/model of the Wi-Fi card. You can get this by typing "netsh wlan sho dr" on the command prompt ----make/model of your Wi-Fi router --- problem symptoms --- reproduction steps for problem to happen Thanks,Alok ManchandaMicrosoft Corporation
Free Windows Admin Tool Kit Click here and download it now
May 22nd, 2009 8:07pm

Please run Windows Update and confirm that you are running the latest updates for your wireless network adapters. If you have the latest updates and you are still seeing problems, please reply with: --- make/model of the Wi-Fi card. You can get this by typing "netsh wlan sho dr" on the command prompt ----make/model of your Wi-Fi router --- problem symptoms --- reproduction steps for problem to happen Thanks,Alok ManchandaMicrosoft Corporation
May 22nd, 2009 8:07pm

Please run Windows Update and confirm that you are running the latest updates for your wireless network adapters. If you have the latest updates and you are still seeing problems, please reply with: --- make/model of the Wi-Fi card. You can get this by typing "netsh wlan sho dr" on the command prompt ----make/model of your Wi-Fi router --- problem symptoms --- reproduction steps for problem to happen Thanks,Alok ManchandaMicrosoft Corporation
Free Windows Admin Tool Kit Click here and download it now
May 23rd, 2009 3:07am

Hi Alok,I have the same problem on a wired connection. Here's my details:NIC card is: Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller (NDIS6.20)This is the onboard NIC for myASUS M4A78-E MotherboardRouter is:DLINK DIR-628Symptoms and how to re-produce: When I let my PC go to sleep from Inactivity or Hibernate, the network connection shows a red X. When I try to re-enable, it shows limited connectivity and a PC restart does not fix this. I have to manually disable and re-enable the NIC card to allow this to work.Thanks for your help.Marc-Andre Surette
May 24th, 2009 8:11pm

Hi Alok,I have the same problem on a wired connection. Here's my details:NIC card is: Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller (NDIS6.20)This is the onboard NIC for myASUS M4A78-E MotherboardRouter is:DLINK DIR-628Symptoms and how to re-produce: When I let my PC go to sleep from Inactivity or Hibernate, the network connection shows a red X. When I try to re-enable, it shows limited connectivity and a PC restart does not fix this. I have to manually disable and re-enable the NIC card to allow this to work.Thanks for your help.Marc-Andre Surette
Free Windows Admin Tool Kit Click here and download it now
May 24th, 2009 8:11pm

Hi Alok, Same problem on a wired and wireless connection. Installed the latest updates from Microsoft. Intel Pro/Wireless 3945ABG Network connection Linksys G ADSL Gateway Model: WAG5AG V3 Preety much close lid, turn computer on sleep and it will not connect to my wireless network. I have changed power management settings in network driver, i have ensured I have the latest software and it still keeps happening. I use to be able to re-start my computer and have the internet working again (until I put it to sleep or close the lid) however it will not even connect at all. When I try to connect and use troubleshoot it identifies it as a "Network Adaptor" issue. Currently using the RC version of Windows 7. On Beta I was able to disable my wireless when it went to sleep and be able to re-enable the wireless and connect to the internet -No Probs- but RC doesnt even work at all. Thanks for your help! Jai
May 24th, 2009 9:05pm

Hi Alok, Same problem on a wired and wireless connection. Installed the latest updates from Microsoft. Intel Pro/Wireless 3945ABG Network connection Linksys G ADSL Gateway Model: WAG5AG V3 Preety much close lid, turn computer on sleep and it will not connect to my wireless network. I have changed power management settings in network driver, i have ensured I have the latest software and it still keeps happening. I use to be able to re-start my computer and have the internet working again (until I put it to sleep or close the lid) however it will not even connect at all. When I try to connect and use troubleshoot it identifies it as a "Network Adaptor" issue. Currently using the RC version of Windows 7. On Beta I was able to disable my wireless when it went to sleep and be able to re-enable the wireless and connect to the internet -No Probs- but RC doesnt even work at all. Thanks for your help! Jai
Free Windows Admin Tool Kit Click here and download it now
May 24th, 2009 9:05pm

Hi Alok,I have the same problem on a wired connection. Here's my details:NIC card is: Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller (NDIS6.20)This is the onboard NIC for myASUS M4A78-E MotherboardRouter is:DLINK DIR-628Symptoms and how to re-produce: When I let my PC go to sleep from Inactivity or Hibernate, the network connection shows a red X. When I try to re-enable, it shows limited connectivity and a PC restart does not fix this. I have to manually disable and re-enable the NIC card to allow this to work.Thanks for your help.Marc-Andre Surette
May 25th, 2009 3:11am

Hi Alok, Same problem on a wired and wireless connection. Installed the latest updates from Microsoft. Intel Pro/Wireless 3945ABG Network connection Linksys G ADSL Gateway Model: WAG5AG V3 Preety much close lid, turn computer on sleep and it will not connect to my wireless network. I have changed power management settings in network driver, i have ensured I have the latest software and it still keeps happening. I use to be able to re-start my computer and have the internet working again (until I put it to sleep or close the lid) however it will not even connect at all. When I try to connect and use troubleshoot it identifies it as a "Network Adaptor" issue. Currently using the RC version of Windows 7. On Beta I was able to disable my wireless when it went to sleep and be able to re-enable the wireless and connect to the internet -No Probs- but RC doesnt even work at all. Thanks for your help! Jai
Free Windows Admin Tool Kit Click here and download it now
May 25th, 2009 4:05am

Hey everyone! I have the same problem. My computer is a notebook Dell XPS 1530, my wlan is a Mini-PCI 1395 Dell, Windows7 Ultimate 64bits, and the router i think is not important because i had the same problem with a least 3 diferents(netgear router, linksys router, linksys Acces Point), and with diferents types of security (WPa2, WPA, not at all, etc). I tried to update my drivers, but i got the same problem, and Windows Update is running always, and I manually check for updates but nothing really helps Everytime my notebook goes to sleep, i have to restart to get internet conection again... I hope somebody can help me (PS: Sorry, i'm from Costa Rica, so my english isn't good) Thanks in advance
May 25th, 2009 6:28pm

Hey everyone! I have the same problem. My computer is a notebook Dell XPS 1530, my wlan is a Mini-PCI 1395 Dell, Windows7 Ultimate 64bits, and the router i think is not important because i had the same problem with a least 3 diferents(netgear router, linksys router, linksys Acces Point), and with diferents types of security (WPa2, WPA, not at all, etc). I tried to update my drivers, but i got the same problem, and Windows Update is running always, and I manually check for updates but nothing really helps Everytime my notebook goes to sleep, i have to restart to get internet conection again... I hope somebody can help me (PS: Sorry, i'm from Costa Rica, so my english isn't good) Thanks in advance
Free Windows Admin Tool Kit Click here and download it now
May 25th, 2009 6:28pm

Hey everyone! I have the same problem. My computer is a notebook Dell XPS 1530, my wlan is a Mini-PCI 1395 Dell, Windows7 Ultimate 64bits, and the router i think is not important because i had the same problem with a least 3 diferents(netgear router, linksys router, linksys Acces Point), and with diferents types of security (WPa2, WPA, not at all, etc). I tried to update my drivers, but i got the same problem, and Windows Update is running always, and I manually check for updates but nothing really helps Everytime my notebook goes to sleep, i have to restart to get internet conection again... I hope somebody can help me (PS: Sorry, i'm from Costa Rica, so my english isn't good) Thanks in advance
May 26th, 2009 1:28am

Folks, those of you having wireless issues please cut and paste the output of the below command: netsh wlan show driver This will tell us the NIC and driver information so we can determine if you have the best driver for your device. For those of you having problems with Wired devices please share: LAN device name: LAN device PNPID: LAN device driver version: LAN device driver date: Thanks, -alok.
Free Windows Admin Tool Kit Click here and download it now
May 28th, 2009 6:03pm

Folks, those of you having wireless issues please cut and paste the output of the below command: netsh wlan show driver This will tell us the NIC and driver information so we can determine if you have the best driver for your device. For those of you having problems with Wired devices please share: LAN device name: LAN device PNPID: LAN device driver version: LAN device driver date: Thanks, -alok.
May 28th, 2009 6:03pm

Folks, those of you having wireless issues please cut and paste the output of the below command: netsh wlan show driver This will tell us the NIC and driver information so we can determine if you have the best driver for your device. For those of you having problems with Wired devices please share: LAN device name: LAN device PNPID: LAN device driver version: LAN device driver date: Thanks, -alok.
Free Windows Admin Tool Kit Click here and download it now
May 29th, 2009 1:03am

Hi.I got the same problem. Aopen 1557-G with Intel 855GM chipset and an Intel 2915ABG WLAN card. My WLAN router is a D-LINK DIR-855 with the latest firmware.Result from netsh wlan show driver (9.1.1.15 is the same as the latest Vista driver from Intel) Interface name: Wireless Network Connection Driver : Intel(R) PRO/Wireless 2915ABG Network Connection Vendor : Intel Corporation Provider : Intel Date : 23.06.2006 Version : 9.1.1.15 INF file : C:\Windows\INF\oem2.inf Files : 3 total C:\Windows\system32\DRIVERS\NETw2v32.sys C:\Windows\system32\NETw4c32.dll C:\Windows\system32\NETw4r32.dll Type : Native Wi-Fi Driver Radio types supported : 802.11b 802.11g 802.11a FIPS 140-2 mode supported : No Hosted network supported : No Authentication and cipher supported in infrastructure mode: Open None Open WEP-40bit Open WEP-104bit Open WEP Open Vendor defined Shared WEP-40bit Shared WEP-104bit Shared WEP Shared Vendor defined WPA-Enterprise TKIP WPA-Enterprise CCMP WPA-Personal TKIP WPA-Personal CCMP WPA2-Enterprise TKIP WPA2-Enterprise CCMP WPA2-Personal TKIP WPA2-Personal CCMP Authentication and cipher supported in ad-hoc mode: Open None Open WEP
June 1st, 2009 4:52am

Hi.I got the same problem. Aopen 1557-G with Intel 855GM chipset and an Intel 2915ABG WLAN card. My WLAN router is a D-LINK DIR-855 with the latest firmware.Result from netsh wlan show driver (9.1.1.15 is the same as the latest Vista driver from Intel) Interface name: Wireless Network Connection Driver : Intel(R) PRO/Wireless 2915ABG Network Connection Vendor : Intel Corporation Provider : Intel Date : 23.06.2006 Version : 9.1.1.15 INF file : C:\Windows\INF\oem2.inf Files : 3 total C:\Windows\system32\DRIVERS\NETw2v32.sys C:\Windows\system32\NETw4c32.dll C:\Windows\system32\NETw4r32.dll Type : Native Wi-Fi Driver Radio types supported : 802.11b 802.11g 802.11a FIPS 140-2 mode supported : No Hosted network supported : No Authentication and cipher supported in infrastructure mode: Open None Open WEP-40bit Open WEP-104bit Open WEP Open Vendor defined Shared WEP-40bit Shared WEP-104bit Shared WEP Shared Vendor defined WPA-Enterprise TKIP WPA-Enterprise CCMP WPA-Personal TKIP WPA-Personal CCMP WPA2-Enterprise TKIP WPA2-Enterprise CCMP WPA2-Personal TKIP WPA2-Personal CCMP Authentication and cipher supported in ad-hoc mode: Open None Open WEP
Free Windows Admin Tool Kit Click here and download it now
June 1st, 2009 4:52am

Hi.I got the same problem. Aopen 1557-G with Intel 855GM chipset and an Intel 2915ABG WLAN card. My WLAN router is a D-LINK DIR-855 with the latest firmware.Result from netsh wlan show driver (9.1.1.15 is the same as the latest Vista driver from Intel) Interface name: Wireless Network Connection Driver : Intel(R) PRO/Wireless 2915ABG Network Connection Vendor : Intel Corporation Provider : Intel Date : 23.06.2006 Version : 9.1.1.15 INF file : C:\Windows\INF\oem2.inf Files : 3 total C:\Windows\system32\DRIVERS\NETw2v32.sys C:\Windows\system32\NETw4c32.dll C:\Windows\system32\NETw4r32.dll Type : Native Wi-Fi Driver Radio types supported : 802.11b 802.11g 802.11a FIPS 140-2 mode supported : No Hosted network supported : No Authentication and cipher supported in infrastructure mode: Open None Open WEP-40bit Open WEP-104bit Open WEP Open Vendor defined Shared WEP-40bit Shared WEP-104bit Shared WEP Shared Vendor defined WPA-Enterprise TKIP WPA-Enterprise CCMP WPA-Personal TKIP WPA-Personal CCMP WPA2-Enterprise TKIP WPA2-Enterprise CCMP WPA2-Personal TKIP WPA2-Personal CCMP Authentication and cipher supported in ad-hoc mode: Open None Open WEP
June 1st, 2009 11:52am

Hi, here's another case on Build 7100/64. CPU is Intel E8400 dual core. I'm running a brand new "Linksys Wireless-G PCI Adapter" which can't reconnect after a Sleep or Hibernate cycle. It may have started once, but on the 3 other trials I've had to restart the computer. Clicking on the WLAN bars and its sub-menus, or doing a disable-enable cycle of the board doesn't bring it back on line. Borge I hope this helps: >netsh wlan show driver Interface name: Wireless Network Connection Driver : Linksys Wireless-G PCI Adapter Vendor : Linksys, A Division of Cisco Systems, Inc. Provider : Linksys, A Division of Cisco Systems, Inc. Date : 11.12.2006 Version : 2.0.3.0 INF file : C:\Windows\INF\oem5.inf Files : 1 total C:\Windows\system32\DRIVERS\WMP54Gv41x64.sys Type : Native Wi-Fi Driver Radio types supported : 802.11b 802.11g FIPS 140-2 mode supported : Yes Hosted network supported : No Authentication and cipher supported in infrastructure mode: Open None Open WEP-40bit Shared WEP-40bit Open WEP-104bit Shared WEP-104bit Open WEP Shared WEP WPA-Enterprise TKIP WPA-Personal TKIP WPA2-Enterprise TKIP WPA2-Personal TKIP WPA-Enterprise CCMP WPA-Personal CCMP WPA2-Enterprise CCMP WPA2-Personal CCMP Authentication and cipher supported in ad-hoc mode: Open None Open WEP-40bit Open WEP-104bit Open WEP WPA2-Personal CCMP
Free Windows Admin Tool Kit Click here and download it now
June 2nd, 2009 3:34pm

Hi, here's another case on Build 7100/64. CPU is Intel E8400 dual core. I'm running a brand new "Linksys Wireless-G PCI Adapter" which can't reconnect after a Sleep or Hibernate cycle. It may have started once, but on the 3 other trials I've had to restart the computer. Clicking on the WLAN bars and its sub-menus, or doing a disable-enable cycle of the board doesn't bring it back on line. Borge I hope this helps: >netsh wlan show driver Interface name: Wireless Network Connection Driver : Linksys Wireless-G PCI Adapter Vendor : Linksys, A Division of Cisco Systems, Inc. Provider : Linksys, A Division of Cisco Systems, Inc. Date : 11.12.2006 Version : 2.0.3.0 INF file : C:\Windows\INF\oem5.inf Files : 1 total C:\Windows\system32\DRIVERS\WMP54Gv41x64.sys Type : Native Wi-Fi Driver Radio types supported : 802.11b 802.11g FIPS 140-2 mode supported : Yes Hosted network supported : No Authentication and cipher supported in infrastructure mode: Open None Open WEP-40bit Shared WEP-40bit Open WEP-104bit Shared WEP-104bit Open WEP Shared WEP WPA-Enterprise TKIP WPA-Personal TKIP WPA2-Enterprise TKIP WPA2-Personal TKIP WPA-Enterprise CCMP WPA-Personal CCMP WPA2-Enterprise CCMP WPA2-Personal CCMP Authentication and cipher supported in ad-hoc mode: Open None Open WEP-40bit Open WEP-104bit Open WEP WPA2-Personal CCMP
June 2nd, 2009 3:34pm

Hi, here's another case on Build 7100/64. CPU is Intel E8400 dual core. I'm running a brand new "Linksys Wireless-G PCI Adapter" which can't reconnect after a Sleep or Hibernate cycle. It may have started once, but on the 3 other trials I've had to restart the computer. Clicking on the WLAN bars and its sub-menus, or doing a disable-enable cycle of the board doesn't bring it back on line. Borge I hope this helps: >netsh wlan show driver Interface name: Wireless Network Connection Driver : Linksys Wireless-G PCI Adapter Vendor : Linksys, A Division of Cisco Systems, Inc. Provider : Linksys, A Division of Cisco Systems, Inc. Date : 11.12.2006 Version : 2.0.3.0 INF file : C:\Windows\INF\oem5.inf Files : 1 total C:\Windows\system32\DRIVERS\WMP54Gv41x64.sys Type : Native Wi-Fi Driver Radio types supported : 802.11b 802.11g FIPS 140-2 mode supported : Yes Hosted network supported : No Authentication and cipher supported in infrastructure mode: Open None Open WEP-40bit Shared WEP-40bit Open WEP-104bit Shared WEP-104bit Open WEP Shared WEP WPA-Enterprise TKIP WPA-Personal TKIP WPA2-Enterprise TKIP WPA2-Personal TKIP WPA-Enterprise CCMP WPA-Personal CCMP WPA2-Enterprise CCMP WPA2-Personal CCMP Authentication and cipher supported in ad-hoc mode: Open None Open WEP-40bit Open WEP-104bit Open WEP WPA2-Personal CCMP
Free Windows Admin Tool Kit Click here and download it now
June 2nd, 2009 10:34pm

Borge, could you update your driver from WU and see if the issue remains? WU has a newer driver: Company: Ralink Technology Corporation Driver Manufacturer: Linksys, A Division of Cisco Systems, Inc. Driver Class: Other Hardware Driver Model: Linksys Wireless-G PCI Adapter Driver Provider: Ralink Technology Corp. Version: 2.1.3.0 Version Date: 11/26/2008 Thanks,Zhimin
June 3rd, 2009 3:20pm

Borge, could you update your driver from WU and see if the issue remains? WU has a newer driver: Company: Ralink Technology Corporation Driver Manufacturer: Linksys, A Division of Cisco Systems, Inc. Driver Class: Other Hardware Driver Model: Linksys Wireless-G PCI Adapter Driver Provider: Ralink Technology Corp. Version: 2.1.3.0 Version Date: 11/26/2008 Thanks,Zhimin
Free Windows Admin Tool Kit Click here and download it now
June 3rd, 2009 3:20pm

Have the same problem with the latest driver from window update. Here is my output:netsh wlan show driver Interface name: Wireless Network Connection Driver : D-Link DWA-140 RangeBooster N USB Adapter Vendor : D-Link Provider : Ralink Date : 2007-11-21 Version : 2.1.3.0 INF file : C:\Windows\INF\oem14.inf Files : 1 total C:\Windows\system32\DRIVERS\netr28u.sys Type : Native Wi-Fi Driver Radio types supported : 802.11b 802.11g FIPS 140-2 mode supported : Yes Authentication and cipher supported in infrastructure mode: Open None Open WEP-40bit Open WEP-104bit Open WEP Shared WEP-40bit Shared WEP-104bit Shared WEP WPA-Enterprise TKIP WPA-Enterprise CCMP WPA-Personal TKIP WPA-Personal CCMP WPA2-Enterprise TKIP WPA2-Enterprise CCMP WPA2-Personal TKIP WPA2-Personal CCMP Authentication and cipher supported in ad-hoc mode: Open None Open WEP-40bit Open WEP-104bit Open WEP WPA2-Personal CCMP
June 3rd, 2009 4:48pm

Have the same problem with the latest driver from window update. Here is my output:netsh wlan show driver Interface name: Wireless Network Connection Driver : D-Link DWA-140 RangeBooster N USB Adapter Vendor : D-Link Provider : Ralink Date : 2007-11-21 Version : 2.1.3.0 INF file : C:\Windows\INF\oem14.inf Files : 1 total C:\Windows\system32\DRIVERS\netr28u.sys Type : Native Wi-Fi Driver Radio types supported : 802.11b 802.11g FIPS 140-2 mode supported : Yes Authentication and cipher supported in infrastructure mode: Open None Open WEP-40bit Open WEP-104bit Open WEP Shared WEP-40bit Shared WEP-104bit Shared WEP WPA-Enterprise TKIP WPA-Enterprise CCMP WPA-Personal TKIP WPA-Personal CCMP WPA2-Enterprise TKIP WPA2-Enterprise CCMP WPA2-Personal TKIP WPA2-Personal CCMP Authentication and cipher supported in ad-hoc mode: Open None Open WEP-40bit Open WEP-104bit Open WEP WPA2-Personal CCMP
Free Windows Admin Tool Kit Click here and download it now
June 3rd, 2009 4:48pm

Borge, could you update your driver from WU and see if the issue remains? WU has a newer driver: Company: Ralink Technology Corporation Driver Manufacturer: Linksys, A Division of Cisco Systems, Inc. Driver Class: Other Hardware Driver Model: Linksys Wireless-G PCI Adapter Driver Provider: Ralink Technology Corp. Version: 2.1.3.0 Version Date: 11/26/2008 Thanks,Zhimin
June 3rd, 2009 10:20pm

Have the same problem with the latest driver from window update. Here is my output:netsh wlan show driver Interface name: Wireless Network Connection Driver : D-Link DWA-140 RangeBooster N USB Adapter Vendor : D-Link Provider : Ralink Date : 2007-11-21 Version : 2.1.3.0 INF file : C:\Windows\INF\oem14.inf Files : 1 total C:\Windows\system32\DRIVERS\netr28u.sys Type : Native Wi-Fi Driver Radio types supported : 802.11b 802.11g FIPS 140-2 mode supported : Yes Authentication and cipher supported in infrastructure mode: Open None Open WEP-40bit Open WEP-104bit Open WEP Shared WEP-40bit Shared WEP-104bit Shared WEP WPA-Enterprise TKIP WPA-Enterprise CCMP WPA-Personal TKIP WPA-Personal CCMP WPA2-Enterprise TKIP WPA2-Enterprise CCMP WPA2-Personal TKIP WPA2-Personal CCMP Authentication and cipher supported in ad-hoc mode: Open None Open WEP-40bit Open WEP-104bit Open WEP WPA2-Personal CCMP
Free Windows Admin Tool Kit Click here and download it now
June 3rd, 2009 11:48pm

here's my command output: C:\Users\Jos>netsh wlan show driver Nombre de interfaz: Conexin de red inalmbrica Controlador : Dell Wireless 1395 WLAN Mini-Card Proveedor : Broadcom Proveedor : Microsoft Fecha : 01/10/2008 Versin : 4.176.75.23 Archivo INF : C:\Windows\INF\oem19.inf Archivos : 2 total C:\Windows\system32\DRIVERS\BCMWL664.SYS C:\Windows\system32\drivers\vwifibus.sys Tipo : Controlador Wi-Fi nativo Tipos de radio admitidos : 802.11g 802.11b Modo FIPS 140-2 compatible: No Red hospedada admitida: s Autenticacin y cifrado admitidos en el modo infrastructure: Abierta Ninguna Abierta WEP Compartida Ninguna Compartida WEP WPA2-Enterprise TKIP WPA2-Personal TKIP WPA2-Enterprise CCMP WPA2-Personal CCMP WPA-Enterprise TKIP WPA-Personal TKIP WPA-Enterprise CCMP WPA-Personal CCMP Autenticacin y cifrado admitidos en el modo ad-hoc: WPA2-Personal CCMP Abierta Ninguna Abierta WEP I hope soon, somebody can tell me what to do, because this is the only thing i don't like about 7. Thanks
June 10th, 2009 2:22am

here's my command output: C:\Users\Jos>netsh wlan show driver Nombre de interfaz: Conexin de red inalmbrica Controlador : Dell Wireless 1395 WLAN Mini-Card Proveedor : Broadcom Proveedor : Microsoft Fecha : 01/10/2008 Versin : 4.176.75.23 Archivo INF : C:\Windows\INF\oem19.inf Archivos : 2 total C:\Windows\system32\DRIVERS\BCMWL664.SYS C:\Windows\system32\drivers\vwifibus.sys Tipo : Controlador Wi-Fi nativo Tipos de radio admitidos : 802.11g 802.11b Modo FIPS 140-2 compatible: No Red hospedada admitida: s Autenticacin y cifrado admitidos en el modo infrastructure: Abierta Ninguna Abierta WEP Compartida Ninguna Compartida WEP WPA2-Enterprise TKIP WPA2-Personal TKIP WPA2-Enterprise CCMP WPA2-Personal CCMP WPA-Enterprise TKIP WPA-Personal TKIP WPA-Enterprise CCMP WPA-Personal CCMP Autenticacin y cifrado admitidos en el modo ad-hoc: WPA2-Personal CCMP Abierta Ninguna Abierta WEP I hope soon, somebody can tell me what to do, because this is the only thing i don't like about 7. Thanks
Free Windows Admin Tool Kit Click here and download it now
June 10th, 2009 2:22am

here's my command output: C:\Users\Jos>netsh wlan show driver Nombre de interfaz: Conexin de red inalmbrica Controlador : Dell Wireless 1395 WLAN Mini-Card Proveedor : Broadcom Proveedor : Microsoft Fecha : 01/10/2008 Versin : 4.176.75.23 Archivo INF : C:\Windows\INF\oem19.inf Archivos : 2 total C:\Windows\system32\DRIVERS\BCMWL664.SYS C:\Windows\system32\drivers\vwifibus.sys Tipo : Controlador Wi-Fi nativo Tipos de radio admitidos : 802.11g 802.11b Modo FIPS 140-2 compatible: No Red hospedada admitida: s Autenticacin y cifrado admitidos en el modo infrastructure: Abierta Ninguna Abierta WEP Compartida Ninguna Compartida WEP WPA2-Enterprise TKIP WPA2-Personal TKIP WPA2-Enterprise CCMP WPA2-Personal CCMP WPA-Enterprise TKIP WPA-Personal TKIP WPA-Enterprise CCMP WPA-Personal CCMP Autenticacin y cifrado admitidos en el modo ad-hoc: WPA2-Personal CCMP Abierta Ninguna Abierta WEP I hope soon, somebody can tell me what to do, because this is the only thing i don't like about 7. Thanks
June 10th, 2009 9:22am

Hi, I had the same problem and tried many solutions. As a last resort I uninstalled and reinstalled my wireless adapter; strangely enough it now seems to come out of sleep (and hibernate) with working wireless connection. (Win7 RC 64). //Stefan
Free Windows Admin Tool Kit Click here and download it now
June 12th, 2009 12:41pm

Hi, I had the same problem and tried many solutions. As a last resort I uninstalled and reinstalled my wireless adapter; strangely enough it now seems to come out of sleep (and hibernate) with working wireless connection. (Win7 RC 64). //Stefan
June 12th, 2009 12:41pm

Hi, I had the same problem and tried many solutions. As a last resort I uninstalled and reinstalled my wireless adapter; strangely enough it now seems to come out of sleep (and hibernate) with working wireless connection. (Win7 RC 64). //Stefan
Free Windows Admin Tool Kit Click here and download it now
June 12th, 2009 7:41pm

Grettings! Same problem, here: Computer: Acer Aspire AM5700-E5720A. Router: DLink DIR-625. Revision A1. Firmware 1.09. Protection: WPA-Personal. Channel 8. Result from netsh wlan show driver: --- Nom de l'interface: Connexion rseau sans fil Pilote : Linksys Wireless-G PCI Adapter Fabricant : Linksys, A Division of Cisco Systems, Inc. Fournisseur : Linksys, A Division of Cisco Systems, Inc. Date : 2006-12-11 Version : 2.0.3.0 Fichier INF : C:\Windows\INF\oem22.inf Fichiers : 1 au total C:\Windows\system32\DRIVERS\WMP54Gv41x64.sy s Type : pilote Wi-Fi natif Types de radios pris en charge: 802.11b 802.11g Prise en charge du mode FIPS 140-2: oui Authentification et chiffrement pris en charge en mode infrastructure: Ouvrir Aucun Ouvrir WEP-40bit Partag WEP-40bit Ouvrir WEP 104 bits Partag WEP 104 bits Ouvrir WEP Partag WEP WPA-Enterprise TKIP WPA-Personal TKIP WPA2-Enterprise TKIP WPA2-Personal TKIP WPA-Enterprise CCMP WPA-Personal CCMP WPA2-Enterprise CCMP WPA2-Personal CCMP Authentification et chiffrement pris en charge en mode ad hoc: Ouvrir Aucun Ouvrir WEP-40bit Ouvrir WEP 104 bits Ouvrir WEP WPA2-Personal CCMP ---
June 21st, 2009 9:31am

Grettings! Same problem, here: Computer: Acer Aspire AM5700-E5720A. Router: DLink DIR-625. Revision A1. Firmware 1.09. Protection: WPA-Personal. Channel 8. Result from netsh wlan show driver: --- Nom de l'interface: Connexion rseau sans fil Pilote : Linksys Wireless-G PCI Adapter Fabricant : Linksys, A Division of Cisco Systems, Inc. Fournisseur : Linksys, A Division of Cisco Systems, Inc. Date : 2006-12-11 Version : 2.0.3.0 Fichier INF : C:\Windows\INF\oem22.inf Fichiers : 1 au total C:\Windows\system32\DRIVERS\WMP54Gv41x64.sy s Type : pilote Wi-Fi natif Types de radios pris en charge: 802.11b 802.11g Prise en charge du mode FIPS 140-2: oui Authentification et chiffrement pris en charge en mode infrastructure: Ouvrir Aucun Ouvrir WEP-40bit Partag WEP-40bit Ouvrir WEP 104 bits Partag WEP 104 bits Ouvrir WEP Partag WEP WPA-Enterprise TKIP WPA-Personal TKIP WPA2-Enterprise TKIP WPA2-Personal TKIP WPA-Enterprise CCMP WPA-Personal CCMP WPA2-Enterprise CCMP WPA2-Personal CCMP Authentification et chiffrement pris en charge en mode ad hoc: Ouvrir Aucun Ouvrir WEP-40bit Ouvrir WEP 104 bits Ouvrir WEP WPA2-Personal CCMP ---
Free Windows Admin Tool Kit Click here and download it now
June 21st, 2009 9:31am

Having this same problem sometimes, other times after my computer (Dell Precision) comes out of sleep mode I can connect to the internet but only for about an hour before it takes me to local access only. I have my laptop running at the same time and it doesn't lose connection at all. Driver: Compact Wireless-G USB Network Adapter Vendor: Linksys, A Division of Cisco Date: 1/8/2008 Version: 4.170.61.0 Running off of a Linksy WRT54G Router
June 21st, 2009 2:58pm

Having this same problem sometimes, other times after my computer (Dell Precision) comes out of sleep mode I can connect to the internet but only for about an hour before it takes me to local access only. I have my laptop running at the same time and it doesn't lose connection at all. Driver: Compact Wireless-G USB Network Adapter Vendor: Linksys, A Division of Cisco Date: 1/8/2008 Version: 4.170.61.0 Running off of a Linksy WRT54G Router
Free Windows Admin Tool Kit Click here and download it now
June 21st, 2009 2:58pm

Grettings! Same problem, here: Computer: Acer Aspire AM5700-E5720A. Router: DLink DIR-625. Revision A1. Firmware 1.09. Protection: WPA-Personal. Channel 8. Result from netsh wlan show driver: --- Nom de l'interface: Connexion rseau sans fil Pilote : Linksys Wireless-G PCI Adapter Fabricant : Linksys, A Division of Cisco Systems, Inc. Fournisseur : Linksys, A Division of Cisco Systems, Inc. Date : 2006-12-11 Version : 2.0.3.0 Fichier INF : C:\Windows\INF\oem22.inf Fichiers : 1 au total C:\Windows\system32\DRIVERS\WMP54Gv41x64.sy s Type : pilote Wi-Fi natif Types de radios pris en charge: 802.11b 802.11g Prise en charge du mode FIPS 140-2: oui Authentification et chiffrement pris en charge en mode infrastructure: Ouvrir Aucun Ouvrir WEP-40bit Partag WEP-40bit Ouvrir WEP 104 bits Partag WEP 104 bits Ouvrir WEP Partag WEP WPA-Enterprise TKIP WPA-Personal TKIP WPA2-Enterprise TKIP WPA2-Personal TKIP WPA-Enterprise CCMP WPA-Personal CCMP WPA2-Enterprise CCMP WPA2-Personal CCMP Authentification et chiffrement pris en charge en mode ad hoc: Ouvrir Aucun Ouvrir WEP-40bit Ouvrir WEP 104 bits Ouvrir WEP WPA2-Personal CCMP ---
June 21st, 2009 4:31pm

Having this same problem sometimes, other times after my computer (Dell Precision) comes out of sleep mode I can connect to the internet but only for about an hour before it takes me to local access only. I have my laptop running at the same time and it doesn't lose connection at all. Driver: Compact Wireless-G USB Network Adapter Vendor: Linksys, A Division of Cisco Date: 1/8/2008 Version: 4.170.61.0 Running off of a Linksy WRT54G Router
Free Windows Admin Tool Kit Click here and download it now
June 21st, 2009 9:58pm

Interface name: Wireless Network Connection Driver : Linksys Wireless-G PCI Adapter Vendor : Linksys, A Division of Cisco Systems, Inc. Provider : Linksys, A Division of Cisco Systems, Inc. Date : 12/11/2006 Version : 2.0.3.0 INF file : C:\Windows\INF\oem1.inf Files : 1 total C:\Windows\system32\DRIVERS\WMP54Gv41x64.sys Type : Native Wi-Fi Driver Radio types supported : 802.11b 802.11g FIPS 140-2 mode supported : Yes Hosted network supported : No Authentication and cipher supported in infrastructure mode: Open None Open WEP-40bit Shared WEP-40bit Open WEP-104bit Shared WEP-104bit Open WEP Shared WEP WPA-Enterprise TKIP WPA-Personal TKIP WPA2-Enterprise TKIP WPA2-Personal TKIP WPA-Enterprise CCMP WPA-Personal CCMP WPA2-Enterprise CCMP WPA2-Personal CCMP Authentication and cipher supported in ad-hoc mode: Open None Open WEP-40bit Open WEP-104bit Open WEP WPA2-Personal CCMP
July 2nd, 2009 1:28pm

Interface name: Wireless Network Connection Driver : Linksys Wireless-G PCI Adapter Vendor : Linksys, A Division of Cisco Systems, Inc. Provider : Linksys, A Division of Cisco Systems, Inc. Date : 12/11/2006 Version : 2.0.3.0 INF file : C:\Windows\INF\oem1.inf Files : 1 total C:\Windows\system32\DRIVERS\WMP54Gv41x64.sys Type : Native Wi-Fi Driver Radio types supported : 802.11b 802.11g FIPS 140-2 mode supported : Yes Hosted network supported : No Authentication and cipher supported in infrastructure mode: Open None Open WEP-40bit Shared WEP-40bit Open WEP-104bit Shared WEP-104bit Open WEP Shared WEP WPA-Enterprise TKIP WPA-Personal TKIP WPA2-Enterprise TKIP WPA2-Personal TKIP WPA-Enterprise CCMP WPA-Personal CCMP WPA2-Enterprise CCMP WPA2-Personal CCMP Authentication and cipher supported in ad-hoc mode: Open None Open WEP-40bit Open WEP-104bit Open WEP WPA2-Personal CCMP
Free Windows Admin Tool Kit Click here and download it now
July 2nd, 2009 1:28pm

Hey folks: My problem with the wireless seems to be solved by some windows update i didn't remember. Nothing else I did, so it must be the WU. So guys, turn on WindowsUpdate and wait to be online again, after the sleep
July 2nd, 2009 1:31pm

Hey folks: My problem with the wireless seems to be solved by some windows update i didn't remember. Nothing else I did, so it must be the WU. So guys, turn on WindowsUpdate and wait to be online again, after the sleep
Free Windows Admin Tool Kit Click here and download it now
July 2nd, 2009 1:31pm

Interface name: Wireless Network Connection Driver : Linksys Wireless-G PCI Adapter Vendor : Linksys, A Division of Cisco Systems, Inc. Provider : Linksys, A Division of Cisco Systems, Inc. Date : 12/11/2006 Version : 2.0.3.0 INF file : C:\Windows\INF\oem1.inf Files : 1 total C:\Windows\system32\DRIVERS\WMP54Gv41x64.sys Type : Native Wi-Fi Driver Radio types supported : 802.11b 802.11g FIPS 140-2 mode supported : Yes Hosted network supported : No Authentication and cipher supported in infrastructure mode: Open None Open WEP-40bit Shared WEP-40bit Open WEP-104bit Shared WEP-104bit Open WEP Shared WEP WPA-Enterprise TKIP WPA-Personal TKIP WPA2-Enterprise TKIP WPA2-Personal TKIP WPA-Enterprise CCMP WPA-Personal CCMP WPA2-Enterprise CCMP WPA2-Personal CCMP Authentication and cipher supported in ad-hoc mode: Open None Open WEP-40bit Open WEP-104bit Open WEP WPA2-Personal CCMP
July 2nd, 2009 8:28pm

Hey folks: My problem with the wireless seems to be solved by some windows update i didn't remember. Nothing else I did, so it must be the WU. So guys, turn on WindowsUpdate and wait to be online again, after the sleep
Free Windows Admin Tool Kit Click here and download it now
July 2nd, 2009 8:31pm

Windows Update didn't fix it for me so doesn't look like that's it. However, if you go into the "Wireless Network Connection Properties", click "Configure" to bring up your adapter properties, and switch to the "Power Management" tab, you can disable the option to "Allow the computer to turn off this device to save power". This fixed the issue for me. Although it would be nice to save power, it's much more of a hassle to not be able to use your wireless adapter when you return from Standby. Hope this helps someone else!Cheers!
July 2nd, 2009 10:10pm

Windows Update didn't fix it for me so doesn't look like that's it. However, if you go into the "Wireless Network Connection Properties", click "Configure" to bring up your adapter properties, and switch to the "Power Management" tab, you can disable the option to "Allow the computer to turn off this device to save power". This fixed the issue for me. Although it would be nice to save power, it's much more of a hassle to not be able to use your wireless adapter when you return from Standby. Hope this helps someone else!Cheers!
Free Windows Admin Tool Kit Click here and download it now
July 2nd, 2009 10:10pm

Windows Update didn't fix it for me so doesn't look like that's it. However, if you go into the "Wireless Network Connection Properties", click "Configure" to bring up your adapter properties, and switch to the "Power Management" tab, you can disable the option to "Allow the computer to turn off this device to save power". This fixed the issue for me. Although it would be nice to save power, it's much more of a hassle to not be able to use your wireless adapter when you return from Standby. Hope this helps someone else!Cheers!
July 3rd, 2009 5:10am

Alok,I have a HP laptop - model DV6408nr running Windows 7 build 7100.When it goes into time-out sleep mode, it wakes up with a "Limited Access" star on my wifi connection.Disabling / enabling doesn't fix it. Uninstalling driver / adding new device doesn't fix it. Rebooting is the only way to correct the problem, until it wakes from sleep mode again.... Might as welljust shut itself down for me at this point... I have a security "grace period" set between screen-off and password wake requirement. If it wakes up beforeit needs a password entered, wifi works. If I have to enter a password, it doesn't work. Updating drivers did not help. Going back to original MS autodetect-driver worked for a couple of days. I think it autoupdated to a newer driver, and it stopped working. Uninstalling / redetecting no longer fixes the problem. Here is my device information:Broadcom 802.11g Network Adapter using Microsoft driver 10/1/2008 - ver 4.176.75.23 BCMWL664.SYS vwifibus.sys Native Wi-Fi Driver Router: Westell A90-9100-EM15-10 Here is my netsh paste:Microsoft Windows [Version 6.1.7100]Copyright (c) 2009 Microsoft Corporation. All rights reserved. C:\Users\William>netsh wlan show driver Interface name: Wireless Network Connection Driver : Broadcom 802.11g Network Adapter Vendor : Broadcom Provider : Microsoft Date : 10/1/2008 Version : 4.176.75.23 INF file : C:\Windows\INF\oem19.inf Files : 2 total C:\Windows\system32\DRIVERS\BCMWL664.SYS C:\Windows\system32\drivers\vwifibus.sys Type : Native Wi-Fi Driver Radio types supported : 802.11g 802.11b FIPS 140-2 mode supported : No Hosted network supported : Yes Authentication and cipher supported in infrastructure mode: Open None Open WEP Shared None Shared WEP WPA2-Enterprise TKIP WPA2-Personal TKIP WPA2-Enterprise CCMP WPA2-Personal CCMP WPA-Enterprise TKIP WPA-Personal TKIP WPA-Enterprise CCMP WPA-Personal CCMP Authentication and cipher supported in ad-hoc mode: WPA2-Personal CCMP Open None Open WEP
Free Windows Admin Tool Kit Click here and download it now
August 7th, 2009 3:36pm

Alok,I have a HP laptop - model DV6408nr running Windows 7 build 7100.When it goes into time-out sleep mode, it wakes up with a "Limited Access" star on my wifi connection.Disabling / enabling doesn't fix it. Uninstalling driver / adding new device doesn't fix it. Rebooting is the only way to correct the problem, until it wakes from sleep mode again.... Might as welljust shut itself down for me at this point... I have a security "grace period" set between screen-off and password wake requirement. If it wakes up beforeit needs a password entered, wifi works. If I have to enter a password, it doesn't work. Updating drivers did not help. Going back to original MS autodetect-driver worked for a couple of days. I think it autoupdated to a newer driver, and it stopped working. Uninstalling / redetecting no longer fixes the problem. Here is my device information:Broadcom 802.11g Network Adapter using Microsoft driver 10/1/2008 - ver 4.176.75.23 BCMWL664.SYS vwifibus.sys Native Wi-Fi Driver Router: Westell A90-9100-EM15-10 Here is my netsh paste:Microsoft Windows [Version 6.1.7100]Copyright (c) 2009 Microsoft Corporation. All rights reserved. C:\Users\William>netsh wlan show driver Interface name: Wireless Network Connection Driver : Broadcom 802.11g Network Adapter Vendor : Broadcom Provider : Microsoft Date : 10/1/2008 Version : 4.176.75.23 INF file : C:\Windows\INF\oem19.inf Files : 2 total C:\Windows\system32\DRIVERS\BCMWL664.SYS C:\Windows\system32\drivers\vwifibus.sys Type : Native Wi-Fi Driver Radio types supported : 802.11g 802.11b FIPS 140-2 mode supported : No Hosted network supported : Yes Authentication and cipher supported in infrastructure mode: Open None Open WEP Shared None Shared WEP WPA2-Enterprise TKIP WPA2-Personal TKIP WPA2-Enterprise CCMP WPA2-Personal CCMP WPA-Enterprise TKIP WPA-Personal TKIP WPA-Enterprise CCMP WPA-Personal CCMP Authentication and cipher supported in ad-hoc mode: WPA2-Personal CCMP Open None Open WEP
August 7th, 2009 3:36pm

I seem to have found a solution in another forum on here... I'm using the following driver, for my Broadcom 802.11g adapter, and I just entered sleep mode, came back, entered a password and got connected to the internet: Good luck everyone, I know how annoying it isMicrosoft Windows [Version 6.1.7100]Copyright (c) 2009 Microsoft Corporation. All rights reserved. C:\Users\William>netsh wlan show driver Interface name: Wireless Network Connection Driver : Broadcom 802.11b/g WLAN Vendor : Broadcom Provider : Broadcom Date : 12/19/2006 Version : 4.102.15.61 INF file : C:\Windows\INF\oem18.inf Files : 1 total C:\Windows\system32\DRIVERS\BCMWL664.SYS Type : Native Wi-Fi Driver Radio types supported : 802.11g 802.11b FIPS 140-2 mode supported : No Hosted network supported : No Authentication and cipher supported in infrastructure mode: Open None Open WEP Shared None Shared WEP WPA2-Enterprise TKIP WPA2-Personal TKIP WPA2-Enterprise CCMP WPA2-Personal CCMP WPA-Enterprise TKIP WPA-Personal TKIP WPA-Enterprise CCMP WPA-Personal CCMP Authentication and cipher supported in ad-hoc mode: WPA2-Personal CCMP Open None Open WEP C:\Users\William>
Free Windows Admin Tool Kit Click here and download it now
August 7th, 2009 3:59pm

I seem to have found a solution in another forum on here... I'm using the following driver, for my Broadcom 802.11g adapter, and I just entered sleep mode, came back, entered a password and got connected to the internet: Good luck everyone, I know how annoying it isMicrosoft Windows [Version 6.1.7100]Copyright (c) 2009 Microsoft Corporation. All rights reserved. C:\Users\William>netsh wlan show driver Interface name: Wireless Network Connection Driver : Broadcom 802.11b/g WLAN Vendor : Broadcom Provider : Broadcom Date : 12/19/2006 Version : 4.102.15.61 INF file : C:\Windows\INF\oem18.inf Files : 1 total C:\Windows\system32\DRIVERS\BCMWL664.SYS Type : Native Wi-Fi Driver Radio types supported : 802.11g 802.11b FIPS 140-2 mode supported : No Hosted network supported : No Authentication and cipher supported in infrastructure mode: Open None Open WEP Shared None Shared WEP WPA2-Enterprise TKIP WPA2-Personal TKIP WPA2-Enterprise CCMP WPA2-Personal CCMP WPA-Enterprise TKIP WPA-Personal TKIP WPA-Enterprise CCMP WPA-Personal CCMP Authentication and cipher supported in ad-hoc mode: WPA2-Personal CCMP Open None Open WEP C:\Users\William>
August 7th, 2009 3:59pm

still working after a time-out sleep mode too... This is NOT the original driver... search for the driver # above on this site...
Free Windows Admin Tool Kit Click here and download it now
August 7th, 2009 4:08pm

still working after a time-out sleep mode too... This is NOT the original driver... search for the driver # above on this site...
August 7th, 2009 4:08pm

Have a similar issue with my hspa dial up,when themodem goes in stand by mode and if i try to connect to other site that is not the same im in currently,the page will not be found and the destiny is unreacheble but the trick i use every time my modem goes sleep when im reading or typing and i want to go to another web site i just use the current site to wake the modem and then i visit other sites which sucks i wish that never happened...Regards,RR
Free Windows Admin Tool Kit Click here and download it now
August 7th, 2009 5:04pm

Have a similar issue with my hspa dial up,when themodem goes in stand by mode and if i try to connect to other site that is not the same im in currently,the page will not be found and the destiny is unreacheble but the trick i use every time my modem goes sleep when im reading or typing and i want to go to another web site i just use the current site to wake the modem and then i visit other sites which sucks i wish that never happened...Regards,RR
August 7th, 2009 5:04pm

Alok,I have a HP laptop - model DV6408nr running Windows 7 build 7100.When it goes into time-out sleep mode, it wakes up with a "Limited Access" star on my wifi connection.Disabling / enabling doesn't fix it. Uninstalling driver / adding new device doesn't fix it. Rebooting is the only way to correct the problem, until it wakes from sleep mode again.... Might as welljust shut itself down for me at this point... I have a security "grace period" set between screen-off and password wake requirement. If it wakes up beforeit needs a password entered, wifi works. If I have to enter a password, it doesn't work. Updating drivers did not help. Going back to original MS autodetect-driver worked for a couple of days. I think it autoupdated to a newer driver, and it stopped working. Uninstalling / redetecting no longer fixes the problem. Here is my device information:Broadcom 802.11g Network Adapter using Microsoft driver 10/1/2008 - ver 4.176.75.23 BCMWL664.SYS vwifibus.sys Native Wi-Fi Driver Router: Westell A90-9100-EM15-10 Here is my netsh paste:Microsoft Windows [Version 6.1.7100]Copyright (c) 2009 Microsoft Corporation. All rights reserved. C:\Users\William>netsh wlan show driver Interface name: Wireless Network Connection Driver : Broadcom 802.11g Network Adapter Vendor : Broadcom Provider : Microsoft Date : 10/1/2008 Version : 4.176.75.23 INF file : C:\Windows\INF\oem19.inf Files : 2 total C:\Windows\system32\DRIVERS\BCMWL664.SYS C:\Windows\system32\drivers\vwifibus.sys Type : Native Wi-Fi Driver Radio types supported : 802.11g 802.11b FIPS 140-2 mode supported : No Hosted network supported : Yes Authentication and cipher supported in infrastructure mode: Open None Open WEP Shared None Shared WEP WPA2-Enterprise TKIP WPA2-Personal TKIP WPA2-Enterprise CCMP WPA2-Personal CCMP WPA-Enterprise TKIP WPA-Personal TKIP WPA-Enterprise CCMP WPA-Personal CCMP Authentication and cipher supported in ad-hoc mode: WPA2-Personal CCMP Open None Open WEP
Free Windows Admin Tool Kit Click here and download it now
August 7th, 2009 10:36pm

I seem to have found a solution in another forum on here... I'm using the following driver, for my Broadcom 802.11g adapter, and I just entered sleep mode, came back, entered a password and got connected to the internet: Good luck everyone, I know how annoying it isMicrosoft Windows [Version 6.1.7100]Copyright (c) 2009 Microsoft Corporation. All rights reserved. C:\Users\William>netsh wlan show driver Interface name: Wireless Network Connection Driver : Broadcom 802.11b/g WLAN Vendor : Broadcom Provider : Broadcom Date : 12/19/2006 Version : 4.102.15.61 INF file : C:\Windows\INF\oem18.inf Files : 1 total C:\Windows\system32\DRIVERS\BCMWL664.SYS Type : Native Wi-Fi Driver Radio types supported : 802.11g 802.11b FIPS 140-2 mode supported : No Hosted network supported : No Authentication and cipher supported in infrastructure mode: Open None Open WEP Shared None Shared WEP WPA2-Enterprise TKIP WPA2-Personal TKIP WPA2-Enterprise CCMP WPA2-Personal CCMP WPA-Enterprise TKIP WPA-Personal TKIP WPA-Enterprise CCMP WPA-Personal CCMP Authentication and cipher supported in ad-hoc mode: WPA2-Personal CCMP Open None Open WEP C:\Users\William>
August 7th, 2009 10:59pm

still working after a time-out sleep mode too... This is NOT the original driver... search for the driver # above on this site...
Free Windows Admin Tool Kit Click here and download it now
August 7th, 2009 11:08pm

Have a similar issue with my hspa dial up,when themodem goes in stand by mode and if i try to connect to other site that is not the same im in currently,the page will not be found and the destiny is unreacheble but the trick i use every time my modem goes sleep when im reading or typing and i want to go to another web site i just use the current site to wake the modem and then i visit other sites which sucks i wish that never happened...Regards,RR
August 8th, 2009 12:04am

Old driver trick worked for coming out of sleep mode, but it started dropping my connection at random other times. So, I'm back to current driver and rebooting to get on the internet :(Refresh current page trick doesn't work for me either...
Free Windows Admin Tool Kit Click here and download it now
August 8th, 2009 6:08pm

Old driver trick worked for coming out of sleep mode, but it started dropping my connection at random other times. So, I'm back to current driver and rebooting to get on the internet :(Refresh current page trick doesn't work for me either...
August 8th, 2009 6:08pm

telarc,I don't know if you saw my post, but trydisabling the option to"Allow the computer to turn off this device to save power" on your wireless network adapter. The reason why mine wasn't working is because sleep mode was turning off my device and then coming out of sleep mode wasn't properly turning the adapter back on.
Free Windows Admin Tool Kit Click here and download it now
August 8th, 2009 8:46pm

telarc,I don't know if you saw my post, but trydisabling the option to"Allow the computer to turn off this device to save power" on your wireless network adapter. The reason why mine wasn't working is because sleep mode was turning off my device and then coming out of sleep mode wasn't properly turning the adapter back on.
August 8th, 2009 8:46pm

Mine is unchecked since i installed the modem but for some reason it keeps going to a nap...but that in my case which im 100% sure my modem has been modified and its bugged...Regards,RR
Free Windows Admin Tool Kit Click here and download it now
August 8th, 2009 10:28pm

Mine is unchecked since i installed the modem but for some reason it keeps going to a nap...but that in my case which im 100% sure my modem has been modified and its bugged...Regards,RR
August 8th, 2009 10:28pm

Old driver trick worked for coming out of sleep mode, but it started dropping my connection at random other times. So, I'm back to current driver and rebooting to get on the internet :(Refresh current page trick doesn't work for me either...
Free Windows Admin Tool Kit Click here and download it now
August 9th, 2009 1:08am

telarc,I don't know if you saw my post, but trydisabling the option to"Allow the computer to turn off this device to save power" on your wireless network adapter. The reason why mine wasn't working is because sleep mode was turning off my device and then coming out of sleep mode wasn't properly turning the adapter back on.
August 9th, 2009 3:46am

Mine is unchecked since i installed the modem but for some reason it keeps going to a nap...but that in my case which im 100% sure my modem has been modified and its bugged...Regards,RR
Free Windows Admin Tool Kit Click here and download it now
August 9th, 2009 5:28am

I am having the same issue. Here is the result of the "netsh wlan sho dr" as you instructed: Driver : Broadcom 4321AG 802.11a/b/g/draft-n Wi-Fi Adapter Vendor : Broadcom Provider : Microsoft Date : 10/1/2008 Version : 4.176.75.23 INF file : C:\Windows\INF\oem3.inf Files : 2 total C:\Windows\system32\DRIVERS\BCMWL6.SYS C:\Windows\system32\drivers\vwifibus.sys Type : Native Wi-Fi Driver Radio types supported : 802.11n 802.11a 802.11g 802.11b FIPS 140-2 mode supported : No Hosted network supported : Yes Authentication and cipher supported in infrastructure mode: Open None Open WEP Shared None Shared WEP WPA2-Enterprise TKIP WPA2-Personal TKIP WPA2-Enterprise CCMP WPA2-Personal CCMP WPA-Enterprise TKIP WPA-Personal TKIP WPA-Enterprise CCMP WPA-Personal CCMP Authentication and cipher supported in ad-hoc mode: WPA2-Personal CCMP Open None Open WEP
September 4th, 2009 12:09am

I am having the same issue. Here is the result of the "netsh wlan sho dr" as you instructed: Driver : Broadcom 4321AG 802.11a/b/g/draft-n Wi-Fi Adapter Vendor : Broadcom Provider : Microsoft Date : 10/1/2008 Version : 4.176.75.23 INF file : C:\Windows\INF\oem3.inf Files : 2 total C:\Windows\system32\DRIVERS\BCMWL6.SYS C:\Windows\system32\drivers\vwifibus.sys Type : Native Wi-Fi Driver Radio types supported : 802.11n 802.11a 802.11g 802.11b FIPS 140-2 mode supported : No Hosted network supported : Yes Authentication and cipher supported in infrastructure mode: Open None Open WEP Shared None Shared WEP WPA2-Enterprise TKIP WPA2-Personal TKIP WPA2-Enterprise CCMP WPA2-Personal CCMP WPA-Enterprise TKIP WPA-Personal TKIP WPA-Enterprise CCMP WPA-Personal CCMP Authentication and cipher supported in ad-hoc mode: WPA2-Personal CCMP Open None Open WEP
Free Windows Admin Tool Kit Click here and download it now
September 4th, 2009 12:09am

I am having the same issue. Here is the result of the "netsh wlan sho dr" as you instructed: Driver : Broadcom 4321AG 802.11a/b/g/draft-n Wi-Fi Adapter Vendor : Broadcom Provider : Microsoft Date : 10/1/2008 Version : 4.176.75.23 INF file : C:\Windows\INF\oem3.inf Files : 2 total C:\Windows\system32\DRIVERS\BCMWL6.SYS C:\Windows\system32\drivers\vwifibus.sys Type : Native Wi-Fi Driver Radio types supported : 802.11n 802.11a 802.11g 802.11b FIPS 140-2 mode supported : No Hosted network supported : Yes Authentication and cipher supported in infrastructure mode: Open None Open WEP Shared None Shared WEP WPA2-Enterprise TKIP WPA2-Personal TKIP WPA2-Enterprise CCMP WPA2-Personal CCMP WPA-Enterprise TKIP WPA-Personal TKIP WPA-Enterprise CCMP WPA-Personal CCMP Authentication and cipher supported in ad-hoc mode: WPA2-Personal CCMP Open None Open WEP
September 4th, 2009 7:09am

My new Dell desktop 1545s has the exact same problem as yours. Did you ever solve the problem? It is frustrating to have to restart every time after sleep to get back on the Internet.
Free Windows Admin Tool Kit Click here and download it now
December 11th, 2009 10:36pm

My new Dell desktop 1545s has the exact same problem as yours. Did you ever solve the problem? It is frustrating to have to restart every time after sleep to get back on the Internet.
December 11th, 2009 10:36pm

My new Dell desktop 1545s has the exact same problem as yours. Did you ever solve the problem? It is frustrating to have to restart every time after sleep to get back on the Internet.
Free Windows Admin Tool Kit Click here and download it now
December 12th, 2009 6:36am

ok everyone, stop freaking out!!! I found a solution . Anyways, this is not the problem of ur wireless card OR windows 7. Its just a feature that shouldnt rele be a feature. Anyways to fix this problem, Step 1: Click on Start and go to Control Panel. In the Control Panel, Click on Small Icons to VIEW. Step 2: Find Network and Sharing Center and open it. Step 3: On the left side, you will see an option that says "Change adapter settings". Open it Step 4: You will two connections there, local and wireless. Right Click on WIRELESS one and select properties. Step 5: Now Click on CONFIGURE. Step 6: You will see 5 tabs, click on the last one that says "power management" Step 7: Now simply UNCHECK the first box that says "Allow the computer to turn off this device to save power" Thats it, you are done. NOW you can do whatever you want, put it to sleep, stand by, hibernate ... and yea you wont have a problem anymore :) I bet this will fix your problem so you are WELCOME :p Varis P.
December 14th, 2009 12:11am

ok everyone, stop freaking out!!! I found a solution . Anyways, this is not the problem of ur wireless card OR windows 7. Its just a feature that shouldnt rele be a feature. Anyways to fix this problem, Step 1: Click on Start and go to Control Panel. In the Control Panel, Click on Small Icons to VIEW. Step 2: Find Network and Sharing Center and open it. Step 3: On the left side, you will see an option that says "Change adapter settings". Open it Step 4: You will two connections there, local and wireless. Right Click on WIRELESS one and select properties. Step 5: Now Click on CONFIGURE. Step 6: You will see 5 tabs, click on the last one that says "power management" Step 7: Now simply UNCHECK the first box that says "Allow the computer to turn off this device to save power" Thats it, you are done. NOW you can do whatever you want, put it to sleep, stand by, hibernate ... and yea you wont have a problem anymore :) I bet this will fix your problem so you are WELCOME :p Varis P.
Free Windows Admin Tool Kit Click here and download it now
December 14th, 2009 12:11am

ok everyone, stop freaking out!!! I found a solution . Anyways, this is not the problem of ur wireless card OR windows 7. Its just a feature that shouldnt rele be a feature. Anyways to fix this problem, Step 1: Click on Start and go to Control Panel. In the Control Panel, Click on Small Icons to VIEW. Step 2: Find Network and Sharing Center and open it. Step 3: On the left side, you will see an option that says "Change adapter settings". Open it Step 4: You will two connections there, local and wireless. Right Click on WIRELESS one and select properties. Step 5: Now Click on CONFIGURE. Step 6: You will see 5 tabs, click on the last one that says "power management" Step 7: Now simply UNCHECK the first box that says "Allow the computer to turn off this device to save power" Thats it, you are done. NOW you can do whatever you want, put it to sleep, stand by, hibernate ... and yea you wont have a problem anymore :) I bet this will fix your problem so you are WELCOME :p Varis P.
December 14th, 2009 8:11am

I did what you said and my computer was already unchecked at the power mamagement box you suggested. Upon waking from sleep the adaptor was unconnected. Now I just HIBERNATE instead of sleep and no more disconnects so far. Gave up trying to fix the Sleep, At least for now, gled you got yours to work.
Free Windows Admin Tool Kit Click here and download it now
December 15th, 2009 3:41pm

I did what you said and my computer was already unchecked at the power mamagement box you suggested. Upon waking from sleep the adaptor was unconnected. Now I just HIBERNATE instead of sleep and no more disconnects so far. Gave up trying to fix the Sleep, At least for now, gled you got yours to work.
December 15th, 2009 3:41pm

I also had this with my Centrino notebook and the Windows 7 RTM. After installing the latest updates from WU, the issue is gone."A programmer is just a tool which converts caffeine into code" CLIP- Stellvertreter http://www.winvistaside.de/
Free Windows Admin Tool Kit Click here and download it now
December 15th, 2009 4:36pm

I also had this with my Centrino notebook and the Windows 7 RTM. After installing the latest updates from WU, the issue is gone."A programmer is just a tool which converts caffeine into code" CLIP- Stellvertreter http://www.winvistaside.de/
December 15th, 2009 4:36pm

I did what you said and my computer was already unchecked at the power mamagement box you suggested. Upon waking from sleep the adaptor was unconnected. Now I just HIBERNATE instead of sleep and no more disconnects so far. Gave up trying to fix the Sleep, At least for now, gled you got yours to work.
Free Windows Admin Tool Kit Click here and download it now
December 15th, 2009 11:41pm

I also had this with my Centrino notebook and the Windows 7 RTM. After installing the latest updates from WU, the issue is gone."A programmer is just a tool which converts caffeine into code" CLIP- Stellvertreter http://www.winvistaside.de/
December 16th, 2009 12:36am

Please read the entire post before commenting. This solution has been repeated and has failed multiple times.
Free Windows Admin Tool Kit Click here and download it now
July 7th, 2010 9:02pm

Please read the entire post before commenting. This solution has been repeated and has failed multiple times.
July 7th, 2010 9:02pm

Please read the entire post before commenting. This solution has been repeated and has failed multiple times.
Free Windows Admin Tool Kit Click here and download it now
July 8th, 2010 4:02am

PROBLEM FIXED - for me at least. I had the same problem for some time and have tried various forums to find a fix. I am using Windows 7 Home Editon 64 bit with a Realtech RTL8191SE wireless card which would not reconnect to my wireless network after Sleep mode. My problem is now fixed by going direct to the Realtech website and downloading the latest driver, the WindowsUpdate always showed my driver as being up to date, which evidently was not the case, prior to going direct to Realtech. So my recommendation is find out exactly what wireless card you are using and then going to the OEM website and downloading the latest driver. Good luck!
December 21st, 2010 3:09pm

PROBLEM FIXED - for me at least. I had the same problem for some time and have tried various forums to find a fix. I am using Windows 7 Home Editon 64 bit with a Realtech RTL8191SE wireless card which would not reconnect to my wireless network after Sleep mode. My problem is now fixed by going direct to the Realtech website and downloading the latest driver, the WindowsUpdate always showed my driver as being up to date, which evidently was not the case, prior to going direct to Realtech. So my recommendation is find out exactly what wireless card you are using and then going to the OEM website and downloading the latest driver. Good luck!
Free Windows Admin Tool Kit Click here and download it now
December 21st, 2010 3:09pm

PROBLEM FIXED - for me at least. I had the same problem for some time and have tried various forums to find a fix. I am using Windows 7 Home Editon 64 bit with a Realtech RTL8191SE wireless card which would not reconnect to my wireless network after Sleep mode. My problem is now fixed by going direct to the Realtech website and downloading the latest driver, the WindowsUpdate always showed my driver as being up to date, which evidently was not the case, prior to going direct to Realtech. So my recommendation is find out exactly what wireless card you are using and then going to the OEM website and downloading the latest driver. Good luck!
December 21st, 2010 11:09pm

My wife's Dell, Windows 7 OS, with a Broadcom 81xx wireless adapter, would have issues (with two different wireless routers) reconnecting with the wireless network at home after waking from 'sleep'. I verified the wireless adapter had the most recent drivers and it's properties were set to NOT conserve power. Even after the aforementioned, the laptop would not connect after 'sleeping'. But her problem was an issue with 'hibernation', not 'sleep'. Three days ago I changed the "what to do when closing the lid" from 'hibernate' to 'sleep'. Three days later, and multiple times going into and out of 'sleep' (not hibernation), the latpop connects without issue. I hope this simple fix helps every else who has exhausted the other possible solutions like we did.
Free Windows Admin Tool Kit Click here and download it now
June 15th, 2011 12:02am

My wife's Dell, Windows 7 OS, with a Broadcom 81xx wireless adapter, would have issues (with two different wireless routers) reconnecting with the wireless network at home after waking from 'sleep'. I verified the wireless adapter had the most recent drivers and it's properties were set to NOT conserve power. Even after the aforementioned, the laptop would not connect after 'sleeping'. But her problem was an issue with 'hibernation', not 'sleep'. Three days ago I changed the "what to do when closing the lid" from 'hibernate' to 'sleep'. Three days later, and multiple times going into and out of 'sleep' (not hibernation), the latpop connects without issue. I hope this simple fix helps every else who has exhausted the other possible solutions like we did.
June 15th, 2011 12:02am

My wife's Dell, Windows 7 OS, with a Broadcom 81xx wireless adapter, would have issues (with two different wireless routers) reconnecting with the wireless network at home after waking from 'sleep'. I verified the wireless adapter had the most recent drivers and it's properties were set to NOT conserve power. Even after the aforementioned, the laptop would not connect after 'sleeping'. But her problem was an issue with 'hibernation', not 'sleep'. Three days ago I changed the "what to do when closing the lid" from 'hibernate' to 'sleep'. Three days later, and multiple times going into and out of 'sleep' (not hibernation), the latpop connects without issue. I hope this simple fix helps every else who has exhausted the other possible solutions like we did.
Free Windows Admin Tool Kit Click here and download it now
June 15th, 2011 7:02am

This problem on a Dell Precision m4500 was (partially) solved for me by turning the wireless off and on again at the physical switch i believe most laptops have on the side of the case.
August 25th, 2011 6:07am

This problem on a Dell Precision m4500 was (partially) solved for me by turning the wireless off and on again at the physical switch i believe most laptops have on the side of the case.
Free Windows Admin Tool Kit Click here and download it now
August 25th, 2011 6:07am

This problem on a Dell Precision m4500 was (partially) solved for me by turning the wireless off and on again at the physical switch i believe most laptops have on the side of the case.
August 25th, 2011 1:07pm

Hi Alok, Here is the output of the netsh command from my machine : Interface name: Wireless Network Connection Driver : Intel(R) Centrino(R) Advanced-N 6200 AGN Vendor : Intel Corporation Provider : Intel Date : 12/21/2010 Version : 14.0.1.2 INF file : C:\Windows\INF\oem14.inf Files : 4 total C:\Windows\system32\DRIVERS\NETwNs64.sys C:\Windows\system32\NETwNc64.dll C:\Windows\system32\NETwNr64.dll C:\Windows\system32\drivers\vwifibus.sys Type : Native Wi-Fi Driver Radio types supported : 802.11a 802.11b 802.11g FIPS 140-2 mode supported : Yes Hosted network supported : Yes Authentication and cipher supported in infrastructure mode: Open None Open WEP-40bit Open WEP-104bit Open WEP Shared WEP-40bit Shared WEP-104bit Shared WEP WPA-Enterprise TKIP WPA-Enterprise CCMP WPA-Personal TKIP WPA-Personal CCMP WPA2-Enterprise TKIP WPA2-Enterprise CCMP WPA2-Personal TKIP WPA2-Personal CCMP Open Vendor defined Authentication and cipher supported in ad-hoc mode: Open None Open WEP-40bit Open WEP-104bit Open WEP Shared WEP-40bit Shared WEP-104bit Shared WEP WPA2-Personal CCMP IHV service present : Yes IHV adapter OUI : [00 80 86], type: [00] IHV extensibility DLL path: C:\Windows\System32\IWMSSvc.dll IHV UI extensibility ClSID: {1bf6cb2d-2ae0-4879-a7aa-a75834fbd0e3} IHV diagnostics CLSID : {00000000-0000-0000-0000-000000000000} thanks, Kiran Chanda
Free Windows Admin Tool Kit Click here and download it now
October 22nd, 2011 8:23am

Hi Alok, Here is the output of the netsh command from my machine : Interface name: Wireless Network Connection Driver : Intel(R) Centrino(R) Advanced-N 6200 AGN Vendor : Intel Corporation Provider : Intel Date : 12/21/2010 Version : 14.0.1.2 INF file : C:\Windows\INF\oem14.inf Files : 4 total C:\Windows\system32\DRIVERS\NETwNs64.sys C:\Windows\system32\NETwNc64.dll C:\Windows\system32\NETwNr64.dll C:\Windows\system32\drivers\vwifibus.sys Type : Native Wi-Fi Driver Radio types supported : 802.11a 802.11b 802.11g FIPS 140-2 mode supported : Yes Hosted network supported : Yes Authentication and cipher supported in infrastructure mode: Open None Open WEP-40bit Open WEP-104bit Open WEP Shared WEP-40bit Shared WEP-104bit Shared WEP WPA-Enterprise TKIP WPA-Enterprise CCMP WPA-Personal TKIP WPA-Personal CCMP WPA2-Enterprise TKIP WPA2-Enterprise CCMP WPA2-Personal TKIP WPA2-Personal CCMP Open Vendor defined Authentication and cipher supported in ad-hoc mode: Open None Open WEP-40bit Open WEP-104bit Open WEP Shared WEP-40bit Shared WEP-104bit Shared WEP WPA2-Personal CCMP IHV service present : Yes IHV adapter OUI : [00 80 86], type: [00] IHV extensibility DLL path: C:\Windows\System32\IWMSSvc.dll IHV UI extensibility ClSID: {1bf6cb2d-2ae0-4879-a7aa-a75834fbd0e3} IHV diagnostics CLSID : {00000000-0000-0000-0000-000000000000} thanks, Kiran Chanda
October 22nd, 2011 8:23am

Hi Alok, Here is the output of the netsh command from my machine : Interface name: Wireless Network Connection Driver : Intel(R) Centrino(R) Advanced-N 6200 AGN Vendor : Intel Corporation Provider : Intel Date : 12/21/2010 Version : 14.0.1.2 INF file : C:\Windows\INF\oem14.inf Files : 4 total C:\Windows\system32\DRIVERS\NETwNs64.sys C:\Windows\system32\NETwNc64.dll C:\Windows\system32\NETwNr64.dll C:\Windows\system32\drivers\vwifibus.sys Type : Native Wi-Fi Driver Radio types supported : 802.11a 802.11b 802.11g FIPS 140-2 mode supported : Yes Hosted network supported : Yes Authentication and cipher supported in infrastructure mode: Open None Open WEP-40bit Open WEP-104bit Open WEP Shared WEP-40bit Shared WEP-104bit Shared WEP WPA-Enterprise TKIP WPA-Enterprise CCMP WPA-Personal TKIP WPA-Personal CCMP WPA2-Enterprise TKIP WPA2-Enterprise CCMP WPA2-Personal TKIP WPA2-Personal CCMP Open Vendor defined Authentication and cipher supported in ad-hoc mode: Open None Open WEP-40bit Open WEP-104bit Open WEP Shared WEP-40bit Shared WEP-104bit Shared WEP WPA2-Personal CCMP IHV service present : Yes IHV adapter OUI : [00 80 86], type: [00] IHV extensibility DLL path: C:\Windows\System32\IWMSSvc.dll IHV UI extensibility ClSID: {1bf6cb2d-2ae0-4879-a7aa-a75834fbd0e3} IHV diagnostics CLSID : {00000000-0000-0000-0000-000000000000} thanks, Kiran Chanda
Free Windows Admin Tool Kit Click here and download it now
October 22nd, 2011 8:31am

Hi, I have had similar problems, and I have tried all the suggestions I have found, but finally think i have sorted it out.... I have a HP pavillion dv6 with a Ralink rt 3090 card I completely uninstalled my wireless card downloaded the driver direct from the HP website and reinstalled - problem solved, im not sure why but it is! (make sure you download the driver before you uninstall the card!!) Hope this can help some of you Dave
October 31st, 2011 4:52pm

Hi, I have had similar problems, and I have tried all the suggestions I have found, but finally think i have sorted it out.... I have a HP pavillion dv6 with a Ralink rt 3090 card I completely uninstalled my wireless card downloaded the driver direct from the HP website and reinstalled - problem solved, im not sure why but it is! (make sure you download the driver before you uninstall the card!!) Hope this can help some of you Dave
Free Windows Admin Tool Kit Click here and download it now
October 31st, 2011 4:52pm

Hi, I have had similar problems, and I have tried all the suggestions I have found, but finally think i have sorted it out.... I have a HP pavillion dv6 with a Ralink rt 3090 card I completely uninstalled my wireless card downloaded the driver direct from the HP website and reinstalled - problem solved, im not sure why but it is! (make sure you download the driver before you uninstall the card!!) Hope this can help some of you Dave
November 1st, 2011 4:48pm

I am totally frustrated with this problem and with Microsoft's lack of response to it. The problem seems to be with Win 7's Homegroup. See this forum.
Free Windows Admin Tool Kit Click here and download it now
November 27th, 2011 3:39pm

I am totally frustrated with this problem and with Microsoft's lack of response to it. The problem seems to be with Win 7's Homegroup. See this forum.
November 27th, 2011 3:39pm

I am totally frustrated with this problem and with Microsoft's lack of response to it. The problem seems to be with Win 7's Homegroup. See this forum.
Free Windows Admin Tool Kit Click here and download it now
November 28th, 2011 3:21pm

Well it worked for me. Mind you I've only tried it once......... Nelli0
November 30th, 2011 9:23am

Varis solved the problem - I've tried it twice now and it still works ok. Hope you all find a solution too. Nelli0
Free Windows Admin Tool Kit Click here and download it now
November 30th, 2011 10:13am

Nope. That doesn't work for me. Glad it did for you.
February 11th, 2012 10:27pm

Nope. That doesn't work for me. Glad it did for you.
Free Windows Admin Tool Kit Click here and download it now
February 11th, 2012 10:27pm

Nope. That doesn't work for me. Glad it did for you.
February 11th, 2012 10:35pm

WORK AROUND: I too have this problem, and only have a workaround, but at least you do not have to restart windoze. I created a shortcut on my desktop for the network adapter. Start -> control panel -> network sharing center(or what ever yours is titled), ->'change adapter settings. Now you will see a listing of your adapters, and can drag the appropriate one to your desktop or quick launch. I did this to save all the steps to go find it. When i wake from sleep, i right click this short cut, and disable the adapter. I wait about a second and then enable the adapter. The network will then reconnect.
Free Windows Admin Tool Kit Click here and download it now
March 31st, 2012 8:24am

WORK AROUND: I too have this problem, and only have a workaround, but at least you do not have to restart windoze. I created a shortcut on my desktop for the network adapter. Start -> control panel -> network sharing center(or what ever yours is titled), ->'change adapter settings. Now you will see a listing of your adapters, and can drag the appropriate one to your desktop or quick launch. I did this to save all the steps to go find it. When i wake from sleep, i right click this short cut, and disable the adapter. I wait about a second and then enable the adapter. The network will then reconnect.
March 31st, 2012 8:24am

WORK AROUND: I too have this problem, and only have a workaround, but at least you do not have to restart windoze. I created a shortcut on my desktop for the network adapter. Start -> control panel -> network sharing center(or what ever yours is titled), ->'change adapter settings. Now you will see a listing of your adapters, and can drag the appropriate one to your desktop or quick launch. I did this to save all the steps to go find it. When i wake from sleep, i right click this short cut, and disable the adapter. I wait about a second and then enable the adapter. The network will then reconnect.
Free Windows Admin Tool Kit Click here and download it now
March 31st, 2012 8:34am

This is what fixed it for me: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\Tcpip\Parameters new DWORD name: ArpRetryCount leave value at default(0) restart Thanks to dave454 over at bit-tech.net
August 12th, 2012 1:24pm

This is what fixed it for me: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\Tcpip\Parameters new DWORD name: ArpRetryCount leave value at default(0) restart Thanks to dave454 over at bit-tech.net
Free Windows Admin Tool Kit Click here and download it now
August 12th, 2012 1:31pm

This topic is archived. No further replies will be accepted.

Other recent topics Other recent topics