Windows Troubleshooter Not Working
Windows 7, clean install. I am getting the error when trying to use several of the troubleshooters: ie like the Windows Update or networking."An error occured while troubleshooting: A problem is preventing the troubleshooter from starting."Any ideas on how to correct this? Is a service not started or something?
November 7th, 2009 8:26pm

Hi,Does this issue occur withall troubleshooters or just Windows Updateand networking troubleshooter? Have you tried to launch troubleshooters from different location? You can launch troubleshooters either from Control Panel, Action Center or Related Topic in Help. How about unchecking "Get the most up-to-date troubleshooters from the Windows Online Troubleshooting Service" and only use the local troubleshooter file? Moreover, based on my further research, please make sure there isn't any Group Policy setting blocking the launch of troubleshooters. I recommend you to check the following location in Local Group Policy Editor.Computer Configuration\Administrative Templates\System\Troubleshooting and Diagnostics\Scripted DiagnosticsCheck these settings and make sure it isn't disabled:Troubleshooting: Allow users to access and run Troubleshooting WizardsTroubleshooting: Allow users to access online troubleshooting content on Microsoft servers from the Troubleshooting Control Panel (via the Windows Online Troubleshooting Service - WOTS)You may also check the related registries:HKLM\SOFTWARE\Policies\Microsoft\Windows\ScriptedDiagnostics!EnableDiagnosticsHKLM\SOFTWARE\Policies\Microsoft\Windows\ScriptedDiagnosticsProvider\Policy!EnableQueryRemoteServerIf the issue persists, I suspect that there might be corrupted files. I recommend you to perform a Startup Repair.For references:Built-in Troubleshooting PacksBest RegardsDale
Free Windows Admin Tool Kit Click here and download it now
November 9th, 2009 11:29am

I get different error messages when I try to run different troubleshooters. This is one. The error code is different for different troubleshooters, but the same basic error message. In a message box.An error occured while troubleshooting:A problem is prventing the troubleshooter from starting.Package ID: MaintenanceDiagnosticsPath: C:\Windows\diagnostics\scheduled\MaintenanceError Code: 0x8E5E0408Source: EngineUser: T61p\AdministratorContext:Elevated
November 9th, 2009 9:46pm

Try using the windows troublshooter to find out why it doesn't work.
Free Windows Admin Tool Kit Click here and download it now
November 9th, 2009 10:04pm

From the error report, I noticed that it is related to scheduled maintenance. I recommend you to turn on the computer maintenance under Troubleshooting settings. Moreover, please also check the followingGroup Policy setting:Computer Configuration\Administrative Templates\System\Troubleshooting and Diagnostics\Scheduled MaintenanceMake sure that you didn't disable "Configure Scheduled Maintenance Behavior".Best RegardsDale
November 10th, 2009 5:02am

This was ONLY an example. ALL the troubleshooter I have tried do not work but with different error codes for each module, networking, Windows update, sound, etc. It is like troubleshooter is disabled for ALL troubleshooting and/or is not there for ANY of them. Again, the error I posted only references one module. They ALL are not working!
Free Windows Admin Tool Kit Click here and download it now
November 10th, 2009 4:32pm

Try to perform a Startup Repair.Best RegardsDale
November 11th, 2009 5:56am

have the same problem, all troubleshooters not working, startup repair already done, tried to move \windows\diagnostics folder and do sfc /scannow, nothing works
Free Windows Admin Tool Kit Click here and download it now
February 11th, 2010 10:55am

Same problem - I'm trying to repair my microphone and speakers since upgrading to Windows 7. The system tells me my Audio Service is not running. When I go to run the trouble shooter - from control panel, from application or elsewhere I get the following:A problem is preventing the troubleshooter from starting.Package ID: AudioPlaybackDiagnosticPath: UnknownError Code: 0x80070005Source: EngineUser: Shelley-Laptop\ShelleyContext: ElevatedI'm unable to update device drivers, and my system shows a Base System Driver error. I conducted a startup repair - no issues found.Not sure where to turn at this point. I'm using a Dell Inspiron 1525, Windows 7 Professional - clean install - 32bit.
February 16th, 2010 7:48am

Same problem for me, clean install of Windows 7, 64-bit, on DELL 1720 with new SSD, oh well, continue with Google to find answer
Free Windows Admin Tool Kit Click here and download it now
May 22nd, 2010 1:02pm

dumbass
July 7th, 2010 8:46pm

We had the same issue. To resolve it, open IE and go to Tools -> Internet Options -> Advanced Uncheck the option - Check for server certificate revocation If this solves your problem then it suggest your PC's are unable to check the CRL for the certificate for some reason. Usually a proxy/firewall issue.
Free Windows Admin Tool Kit Click here and download it now
September 9th, 2010 3:43pm

I had the same troubleshooting on the network -> IP conflict!
January 12th, 2011 9:49pm

I was having the same issue on all windows 7 domain computers. I found the section "Troubleshooting Pack Management" in this: http://technet.microsoft.com/en-us/library/ee424304(WS.10).aspx When I tried to run the PowerShell commands: Import-Module TroubleshootingPack $aero = Get-TroubleshootingPack $env:SystemRoot\Diagnostics\System\Aero Invoke-TroubleshootingPack -Pack $aero -Result C:\DiagResult -unattend I received this: Get-TroubleshootingPack : The revocation process could not continue - the certificate(s) could not be checked. (Exception from HRESULT: 0x800B010E) So in IE, tools, advanced tab in the settings section. under the security section, I unchecked "check for publishers certificate revocation" and "check for server certificate revocation" I re-ran the above commands and they completed successfully. Low and behold, all of my troubleshooters are now working. No need for me to do a repair install!!! Now for me, this only pinpoints the true problem, I cannot access the CRL Distribution point of whatever certificate is being used for w7 troubleshooting. A few months back I moved my internal CA to a new DC (with a new name), so I suspect that there is a problem with my internal CRL. But I really don’t know for sure. Is the W7 troubleshooter(s) trying to access a public CRL and it's actually a firewall issue? Perhaps someone knows the answer to this part of the problem?
Free Windows Admin Tool Kit Click here and download it now
March 29th, 2011 11:01pm

On a computer that is currently reproducing the issue, what do you see for the State registry value? c:\>reg query "HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\WinTrust\Trust Providers\Software Publishing" HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\WinTrust\Trust Providers\Software Publishing State REG_DWORD 0x23c00 And then if you run Rsop.msc on that machine, what IE-related policies are being pushed down to it? And if you do a "where gp*.dll" - check the version numbers of those files, both on a Windows 7 SP1 client that is reproducing the problem AND on a Windows Server 2008 R2 domain controller. Because it sounds similar to this issue resolved by hotfix 982606 where the State value is not written properly, but it sounds like you are already on versions of those files that would contain the fix. 982606 The value of the "State" registry item is changed after a Group Policy preferences setting is applied in Windows Server 2008, in Windows Vista or in Windows Server 2008 R2 http://support.microsoft.com/kb/982606
July 11th, 2011 5:10pm

This topic is archived. No further replies will be accepted.

Other recent topics Other recent topics