Do you know why Windows Explorer would be showing the C Drive at 836 gb and a separate SSD drive at one terabyte?  Volume F and Volume C are two 1Terabyte SSDs.  They were setup for RAID 0 using the Intel Raid Storage Technology utility.  In disk management the drive is shown as one 2 Terabyte drive.  Is their any explanation for this to happen?

• Edited by Windows Explorer and Raid 0 Thursday, February 26, 2015 2:04 AM

Hello Windows Explorer and Raid 0,

Do you use three same SSD?

C: drive use one single 1Terabyte SSD and only have 836GB space?
And the Raid 0 can normally have 2 Terabyte space?

If they are the same SSD, please contact the manufacturer to check the hardware.

Best regards,
Fangzhou CHEN

It sounds as though your RAID0 is simply partitioned with two partitions.

Brandon
Windows Outreach Team- IT Pro
Windows for IT Pros on TechNet