Windows 7 Won't shutdown
I have installed/ungraded Windows 7 Beta on myInspiron E1705 over Vista. I hadn't had any problems initially however I noticed now that it won't shutdown. It goes to the "logging off" page but won't shutdown. I don't know exactly when it began because I usually but my laptop into Sleep mode. I do have all of the updates that Microsoft released for Windows 7.I tried to restore to a previous time but there were no restore points created. Does anyone have any ideas? Should I re-ugrade the installation of Windows7? Thanks, dreinert
January 15th, 2009 1:37am

same problem herehttp://social.technet.microsoft.com/Forums/en/w7itprogeneral/thread/f91c8e35-3163-433a-ac37-f3a44926e005
Free Windows Admin Tool Kit Click here and download it now
January 15th, 2009 1:41am

Are you closing all programs before telling it to shut down? Also, does it do that every time or just some of the time?
January 15th, 2009 1:45am

Thank you for the quick response, it has been happening everytime. I ran the check disk program and selected to fix all errors. I let it run and didn't sit there the whole time but I didn't see any errors. If you need anything else from me please let me know.Thanks,dreinert
Free Windows Admin Tool Kit Click here and download it now
January 15th, 2009 1:50am

Sorry I was trying to search through some whitepages, but the only thing I can think of it to insert the ISO image back into the drive boot from it and see if it can repair it (sorry I don't know exactly how to do that in Win7.) The other option that I'm coming up with is to format the drive and start again, or to use the restore center inside of Windows 7 and have it reinstall the copy.
January 15th, 2009 2:14am

there is more than one person with this problem so reinstallng or formating is not the answer we need to find out why this is happening..
Free Windows Admin Tool Kit Click here and download it now
January 15th, 2009 2:25am

Hi2009 said: there is more than one person with this problem so reinstallng or formating is not the answer we need to find out why this is happening.. Agreed but to get the dev teams to see and read about it, you have to send feedback. Most of them will not have the time to read all of the forum posts, so they use that so they can get information faster, the forums are just so that people can get help from others, not for the devs to see what needs fixing.
January 15th, 2009 2:33am

I would just like clarify, Hi2009's problem isn't very similar to mine. I will go to the "Logging off" page almost immediately however at that point I can leave my computer on for 15 minutes and it still won't shut down. I have had to hold the power button to shut it down which I would really really like to stop using.dreinert
Free Windows Admin Tool Kit Click here and download it now
January 15th, 2009 2:35am

dreinert said: I would just like clarify, Hi2009's problem isn't very similar to mine. I will go to the "Logging off" page almost immediately however at that point I can leave my computer on for 15 minutes and it still won't shut down. I have had to hold the power button to shut it down which I would really really like to stop using.dreinertHave you runMicrosoft update again to make sure that you have all of the updates? Also in case you don't have it set to, you might want to go into the Windows update settings and tell it to use Microsoft Updates (the box on the bottom of the list).
January 15th, 2009 2:41am

I do have the Microsoft updates box checked in Windows update settings and I also tried again today for updates, I manually clicked "check for updates" and there are none.Also, I did send feed back about the problem earlier this afternoon. to Microsoft.Thanks,dreinert
Free Windows Admin Tool Kit Click here and download it now
January 15th, 2009 2:46am

I'm not sure if this is the correct solution, but have you tried installing the latest board management software downloaded from your motherboard manufacturer? It may not install without using the compatibility mode for Vista. You can use that by right clicking on the set-up.exec file within that download and choosing "troubleshoot". It would seem like the O.S. in your pc is trying to send a command to shut-down to the board but the communication is failing? Updating the drivers for the board might be the answer. I'd make a back-up image before trying it so you can re-store the O.S. though!
January 15th, 2009 2:56am

Hi newerd,I'm not 100% on what you would like me to try. It is a dell so I can get everything from Dell downloads (I believe Dell makes there own MBs). Are you talking about the chipset driver? If so, I do have the latest one Dell is offering.I went there this morning to see if there had been any newer driver releases for anything on my computer and there wasn't. If you aren't talking about the chipset driver or if you think I should try to reinstall the chipset driver please let me know. Also if you think I can download the chipset driver and try to find troubleshoot.Thanks,dreinert
Free Windows Admin Tool Kit Click here and download it now
January 15th, 2009 3:03am

While your at it you might also want to see if the version of the BIOS you are using is the latest. (The version is displayed on the bottom of theDell start up screen.)
January 15th, 2009 3:21am

Yes, I was referring to the chipset drivers. I don't think it would help to re-install the same Dell drivers. Another possibility would be to find out what chipset your board employs and download the drivers directly from the chipset manufacturer and install those (using compatibility mode if necessary). Again be sure to save an O.S. image in case something goes VERY bad. Don't recommend this except for Beta operating systems.....normally it's best to use the drivers from the computer manufacturer but Dell may not have as new a driver as the chipset manufacturer. Don't be afraid to experiment......it's part of the fun in trying out a throw-away operating system. Hope I didn't send you on a wild goose chase!
Free Windows Admin Tool Kit Click here and download it now
January 15th, 2009 5:00am

I have the same problem on my desktop.Upgraded it from Vista to Windows 7, when I choose shutdown it start shutting down to the point that my monitor says 'no signal', my mouse is turning off (red light disappears) en leds on my keyboard go out. On that point normally my pc shutdown in a second, but with Windows 7 it stays on. Fans keep spinning, harddisk keep spinning. Have to shut it down with the power button.When restarting Windows 7 start normally, so it is a nice shut down.All the things remind me of the old 'it is now safe to turn of your computer' screen back in Win95, only thing now is that no message appear on the screen. Vista didn't have this problem.
January 16th, 2009 12:18pm

I have been having a very similar issue. I have Windows 7 installed on my Toshiba Laptop. The times when it doesn't want to shutdown or restart is when there was a program that has crashed. If there isn't a crash, it will do anything I want it to, but the minute something crashes and I have to End Task, then it won't shutdown.
Free Windows Admin Tool Kit Click here and download it now
February 12th, 2009 4:48am

I have been having a very similar issue. I have Windows 7 installed on my Toshiba Laptop. The times when it doesn't want to shutdown or restart is when there was a program that has crashed. If there isn't a crash, it will do anything I want it to, but the minute something crashes and I have to End Task, then it won't shutdown.
February 12th, 2009 4:48am

Shutdown issues are (IMO) mostly due to hanging apps that won't close gracefully.To figure out which one, open Task Manager to the Processes tab and attempt to shut down.Look for any unusual activity just before the system hangs.Beyond that, I'd have to suggest killing off processes that are running prior to shutting down.End 4 or 5 processes (making a note of which ones) and then shutdown. If it hangs, you didn't find it - if it doesn't hang, then you've found it. Continue to do this with groups of 4 or 5 until you find the process that's causing it.In the event that this doesn't locate it, then try killing them cumulatively - kill the first 4 or 5, then kill the first 8 or 10, etc. This is in case that it's a problem with one app relying on another.Eventually you'll have killed everything and it'll either work or not work. If it does work you'll be able to identify the process by trial and error - if it doesn't work, then I'd have to suspect an issue with either drivers or the Windows OS.- John
Free Windows Admin Tool Kit Click here and download it now
February 12th, 2009 5:41pm

I have the same problem. If I choose Shutdown, it gets stuck in the "Shutting down" screen for ever and the only option is to turn power off. I have tried to close all processes very shutting down, run windows update, check for updated drivers but still doesn't work. Any suggestion?BTW, Internet Explorer and MediaCenter are not working properly neither. They hang very often and the funny thing is that I cannot close the apps, not even from the task manager. The only option is to power off. A nightmare.
March 10th, 2009 11:57pm

it might be worth posting what anti-virus / firewall software those of you with the shut down problems are using in case its something like that causing it as i had this issue while i was trying to use the Kapersky Technical preview for Windows 7,once removed the problem went away. Also are you using any form of virtual cd drive software as that may be causing it.
Free Windows Admin Tool Kit Click here and download it now
March 11th, 2009 11:51pm

I notice that if explorer is hanging I can't kill it from task manager. The same is for Media Player. When I can't kill it I also can't shutdown or reset my DELL Inspiron 1520. Only Hibernate works.Senior .NET Developer
March 12th, 2009 3:53pm

You would need to determine on yourown what this is in your case since there are many things could be causing it.*It could just be a stubborn service process. Follow these steps:Go to control panel, administrative tools, servicesTry disabling services you don't need and see if that resolves your issue.Examples would be (smart card, touch screen, etc). Out of the box, typical services are enabled by default. However, they are probablyseveral not needed.You can attempt to determine the culprit bystopping eachservice one by oneto see how long each take. This may give you a better understanding of what eadch service does. *It could be a corrupt virtual paging file. You could recreate it by following these steps:Go to control panel, system, advanced, performance settings button, advanced tab, virtual memory change button. Click no paging file, then set, ok, then reboot. Once rebooted, repeat and if not recreated automatically already, click system managed, ok, reboot.*If you suspect it might be your system restore directory, you can try disabling it and restarting it upon reboot. However, this will delete all your previous restore points.Follow these steps:Go to control panel, system, system restore tab, then turn off system restore box. Reboot, repeat and turn on.*It can be helpful to every once in a whileto delete temporary files. Not just temporary internet files. There are many utilities available on the internet to help with this task. However, with Vista and Win7, they have added several temp locations so make sure the software youuse is Vista compatible.These folders are usually safe to empty "C:\WINDOWS\Minidump", "C:\WINDOWS\Temp", "C:\temp".
Free Windows Admin Tool Kit Click here and download it now
March 13th, 2009 10:16pm

Compu_guySaid: I have been having a very similar issue. I have Windows 7 installed on my Toshiba Laptop. The times when it doesn't want to shutdown or restart is when there was a program that has crashed. If there isn't a crash, it will do anything I want it to, but the minute something crashes and I have to End Task, then it won't shutdown.This is the exact issue I am having. I am running an HP Pavilion Laptop DV6663. Runs great until there is a crash in one of the programs. After that, the system takes forever to startup.Sure hope there is a solution soon.Dale Peronteauperonteau@gmail.com
November 16th, 2009 10:28pm

I have the same problem on a Jetta laptop. It is NOT related to applications not closing, because this happens if I shutdown immediately after a boot. It may be related to the DVD drive. Does anybody have any information on this yet? I notice that there are 285,000 hits on Bing searching for '"Windows 7" shutdown hang'. Maybe it's not such an isolated problem.
Free Windows Admin Tool Kit Click here and download it now
November 22nd, 2009 9:24pm

TWO QUESTIONS FOR ALL OF YOU: 1.) Did you have the update icon on the 'shut down' button? 2.) Did you turn on Automatic updates? Because this same thing happens to my Toshiba M5 laptop and HP d530 CMT desktop. I would pinpoint that some sort of Windows update during the period of November 14 - 21st that is causing it. Because my machine is no longer able to shut down after that date, and the update icon still hangs around the "shut down" button. I have to do a restart, and turn it off during POST.
November 30th, 2009 10:31pm

Hi NEUTRALIST: I don't know if it's related but you might read the news story about a possible Windows Update problem:http://www.tomshardware.co.uk/Microsoft-Windows-Black-Screen-Death,news-32330.html
Free Windows Admin Tool Kit Click here and download it now
December 1st, 2009 1:35am

Hi NEUTRALIST: I don't know if it's related but you might read the news story about a possible Windows Update problem:http://www.tomshardware.co.uk/Microsoft-Windows-Black-Screen-Death,news-32330.html Thanks for the info. I was able to isolate it. The problematic update is KB976098 : Time Zone Update. I got rid of it and both my machines now shut down properly. When I put the updates back in I got problem all over again. There are many people reported problems, and most of them have Comodo Internet Security installed.
December 2nd, 2009 7:58pm

Same symptom - system hangs on shutdown / restart at the "Logging Off" screen. Clean Win7 64bit home premium install, RAM & HD diags find no faults (RAID1, after each hard reset I run verification - sometimes no errors, sometimes 3-5, most I've seen is 10). ASUS Rampage II Gene MB (no overclocking) Core i7 920 6GB Corsair RAM EVGA GeForce 275 (no overclocking) Dual Hitachi 1TB drives RAID1 DVD-ROM, DVD-RW CF reader USB kb/mouse/webcam Mapped drive to local NAS backup ZoneAlarm latest Win7 version Latest MS updates, latest Intel Storage driver, applied Intel chipset updates Latest drivers for all installed devices (I could find) powercfg -energy reports some USB issues, so I suspect there needs to be a new Intel chipset update for the ICH10R System runs great otherwise, wish I could put my finger on exactly what was hanging on logoff so I could disable / update / fix. Really annoying.
Free Windows Admin Tool Kit Click here and download it now
December 2nd, 2009 8:42pm

I upgraded my Dell XPS420 PC to Windows 7 Home prem 32bit performing an in-place upgrade. I did that on 11/19/09.....and for at least 1 week my PC shutdown just fine. Sometime last week, could have been following Microsoft's Windows Upadte of 11/09/09....I started to have problems shutting down. The screen would go to Shutting Down woth the blue circle..turning.....I waited 10 mins one time, the PC would not shutdown....I had to use the PC's Power Button. I guess it is a good thing recent versions of Windows doesn't get corupted when a PC doesn'tshutdown by itself. The twist for me is, this issue doesn't seem to happen all the time. If I were to power on my PC now, wotk on it for a hour or so...then shut it down...it would. I doubt this has any impact, but I normally turn on my PC first thing in the morning....and it remains on all day...I turn it off before I go to bed....and this is when it refuses to shutdown (I mean really, I want to go to sleep and it doesn't...go figure). I do use the Power features as to the Monitor and HD, but those settings are such that during the day both invoke as there are times I don't use the PC much during the Day. Could be be an issue with how Windows 7 handles itself coming out of a Monitor\HD Power off state? What makes no sense to this is, the Shutdown went fine for about 1 week after the Upgrade to 7, my Power settings have remained the same with no changes, I have not installed any new programs....Windows Updates are current.......basically my PC remains unchanged from the day the Upgrade was completed but yet 1 week later the shutdown issue surfaces. There must be a solution, there are just too many users having this issue. To shutdown processes in an effort to identify the possible culprit....would not fix the issue, the process would be needed and would re-start after re-booting. It would seem this is, as was Vista Release issues, something Microsoft missed and needs to fix.The other issue I have is, as well as many others, after the upgrade I had No Internet Connection. My network Driver would not OBTAIN ip\DNS addresses....driver was updated to a Windows 7 driver, I had to set my Network Properties to Static settings.....this is an issue for Microsoft to fix as well.These are the issues that surfaced following Vista's release and Microsoft said it would be different this timewith Windows 7.......doesn't seem like that is so.
December 3rd, 2009 6:15pm

Here's something I found on another board. Seems to work. This soluytion is for peoplke with ASUS 5 (or similar) mobos. I have an ASUS P6T with the same hangup. Maybe this'll work for you: http://windows7forums.com/windows-7-support/5028-windows-7-wont-shut-down-help-2.html#post75228 gridpool OK. I found the fix. It just took some more searching online. I found this post in a post copiedaround the Internet. I only take credit for the last BIOS change I found on my own.... Click Start, on Computer click right mouse button and select Properties, click Device Manager Find the item labeled IEEE 1394 Bus Host Controllers and expand this group. This group only contains one device: VIA 1394 OHCI Compilant Host Controller Right click this item and select Properties, select Power Management tab, and finally check the Allow the computer to turn off this device to save power. After that the computer should power down normally. IF you can't find the VIA 1394 OHCI Compliant Host Controller in Device Manager (like me), do the following step- Reboot and go into the BIOS. The IEEE 1394 Controller is Enabled in there. Disable it, save BIOS settings and reboot into Windows7. Now the VIA 1394 Controller shows up in the Device Manager!! Isn't that backwards? Weird. Let me know how that goes. I have Windows 7 RTM 64bit Ultimate Edition, so if you have a slightly different build, you may have different results. I suggest you try this either way. Good luck
Free Windows Admin Tool Kit Click here and download it now
December 5th, 2009 7:51pm

hi im having the same problem as what u had it goes to the logging of page and thts it it gets stuck their :( i have only justy got my computer and just installed windows 7 and everything seems to be going wrong on it, did u find out what the problem was? thanx :)
December 7th, 2009 4:33pm

Nope, still doing my own trouble shooting.Mine does not always encounter the Shutdown issue. I would say I only experience this issue 2 out of 10 shutdowns. Myresearch shows it is a possible program, Process or Service that is not closing properly therefore hanging the Windows 7 from Closing and I believe that is correct. I also believe that there are sufficent number of users reporting this issue that Microsoft will eventually get to work on this shutdown issue and most likely come up with a resolution before I do. One user reported his shutdown issues began after the Windows 7 Updates on 11/19/09....and that could be so. My PC shutdown fine for about about after I upgraded, and it seems my issues could have begun following the 11/19/09 Windows Updates....that is another reason why I feel a fix might come from Microsoft.........
Free Windows Admin Tool Kit Click here and download it now
December 7th, 2009 6:07pm

I've got the same issue too, but only when my NAS drive is connected to the router, if the NAS drive is disconnected it shuts down fine, with the NAS drive connected I can't put my Lenovo X200 in Sleep or Hibernate mode or Shutdown.
January 22nd, 2010 11:23pm

I have a suggestion for Microsoft: Check how long it takes a service to shut down, and if it is taking too long, allow an operator to say it is ok to shut down without a response from the offending service. To quote the sage Yakov Smirnoff - 'What a concept!' http://news.yakov.com/2008/10/still-smirnoffs-world-he-just-adjusted.html
Free Windows Admin Tool Kit Click here and download it now
January 27th, 2010 9:38pm

This is happening when Microsoft has decided its best course of action is to shut down for you! Just a for instance: Let's say the OS has detected suspicious activity on the system and decided the "wise" course of action is to immediately shut down the whole system before any more damage is done.... Should we be waiting for some sort of return code? I think at that point any "malware" has got you where it wants you. You no longer have any control of your machine, and it can jolly well do whatever it wants and you are powerless short of pulling the power cord. What do you do on a laptop? Remove the battery? (look out for that caff-pow...!) I think the OS should be designed so that it retains some level of control. Otherwise I don't think the OS is a very good one. I think Bill Gates would back me up on that one.
January 27th, 2010 9:48pm

Sorry, I put my response under the wrong post... See my further discussion of the implications of the system not shutting down. Here is my concern: It seems malware writers realize the best code to compromise are the 3rd party vendor's drivers. They get installed early on, usually in protected mode or such that the OS is reluctant to terminate them. These are also the modules which get updated most frequently. So when you get that update from Yahoo, or Adobe, or RealMedia, or WinAmp, if they are not signed and check-summed AND you check all that stuff when you do the update, you are wide open to a 'man-in-the-middle' attack. Now you have code loaded which is hoping that your machine doesn't shut down! Another win for the zombie-masters... THE POINT.... is it is VITAL that the OS maintain order. 3rd party vendors should have some say, but in the end, our only hope is with the OS (kernel). This is Windows 7!! In Fedora or Ubuntu years, that is about Win34! It's not like the kernel fits in 64k any more! I have 4GB of real memory with 1TB of Raid. Let's get with the program... Microsoft is competing with Security Enhanced Linux(SELinux). The update security protocol only allows fully signed updates via an enhanced YUM which really coordinates all module versioning. We are not back in the old IBM link-lib days. Microsoft may be using a similarly robust system, but they are surely keeping their light hidden under a bushel-basket.
Free Windows Admin Tool Kit Click here and download it now
January 27th, 2010 10:11pm

Yes, I have. But in that vein, I am no stranger. It is the old IBM, "We don't support 3rd party software" gambit. Do you think it is good policy to cinstantly say, "nvidia" got it wrong; we got it right! Proper design of all software is to check and issue condition codes in an orderly fashion. No fair issuing yet a new order if severity which no one else has any idea what it means. Also in that vein, I have decided to change motherboards, so the question is, what size of penalty will Microsoft force me to pay because they can't play well with some of their vendors? I think I should have the right to damages from both of them; including punitive damages. After all, since Microsoft has more than 90% of the market, what is to slow them down from hurting all sorts of people with impunity? Their attitude is, "Like it or lump it!" Just go see any of Steve Ballmer's sales presentations. You could sell the disdain by the pound. http://scrapetv.com/News/News Pages/Business/images/steve-ballmer.jpg
January 27th, 2010 10:12pm

I've ran into a "non-shutdown/hanging on shutdown" issue via Windows 7 shutdown button. Powering it off by holding down the power button was the only way to shut it down. The laptop was an HP dv6-1259dx model. My workaround: Loaded the Windows 7 boot disk into the DVD drive, Booted to it, selected system repair option instead of an "Install"....Then, did a system restore to 3 weeks prior and it works! Things I tried Prior: Flashed my BIOS to the newest ver....however, that did not solve the issue....I also looked through the system event logs - a good place to start to see what app is hanging, or possibly a device driver. In this case the only thing I seen in the history in those 3 weeks was a java update, windows updates, av updates....nothing special..... Possible Cause: Corrupt file, Windows update gone bad? ...lol
Free Windows Admin Tool Kit Click here and download it now
February 3rd, 2010 8:11am

SIMPLE FIX FOR COMPUTER NOT POWERING DOWN AFTER SHUTDOWN WINDOWS 7! TRY THIS BEFORE YOU GO GEEK CRAZY!If your motherboard has a firewire port, you will need to check in device manager if it is set to allow the computer to switch off the device, SIMPLE and EASY. You can do this by going to properties of the devices under IEEE1394 Bus host controller and going to power management. After that, make sure the "allow this computer to turn off this device to save power" is ticked. Step by step for noobs:"Windows Start Button" >> Control Panel >> Hardware and Sound >> Device Manager >> IEEE1394 Bus host controller (expand) >> double click "VIA 1394 OHCI Compliant Host Controller" (this could be different on your machine) >> Click on "Power Management" tab >> Check the box "Allow the computer to turn off this device to save power" >> click "OK". Now your computer will shut down normally from here on out :) So to all you out there that believed the usual BS that it's the vendors fault (IE, ASUS), think again, it's yet another lame brain drain issue with a new OS from MS. PSA bonus!! Here is the answer without broken english read out of a book in some far off country! Americans are still good for something eh? Not worth employing though : O
February 8th, 2010 2:38pm

I had the same problem. This worked for me: Figured It Out wrote: Try this:1. Start2. control panel3. system and security4. power options5. change plan5. change advanced power settings6. scroll down to USB7.click USB setttings8. click USB selective suspend9. DisableThat should work it did for my husband. We stumbled upon it while trying to fix it. If you notice all of your errors in the log were with the USB device not entering suspend.
Free Windows Admin Tool Kit Click here and download it now
February 9th, 2010 5:59am

Done that and not sure but you should have you pagefile on a seperate drive from your OS if you can. I have it installed on 2 seperate 250GB IDE Drives so it is not near my data or OS.
March 1st, 2010 9:50am

Re-installed w/o RAID! The NVIDIA GeForce 8300 controller on the M4N78 PRO with the AMI BIOS is a bit weird. In SATA Mode only 4 SATA headers are active, but everything works fine; like Express Gate and SATA LightScribe. In ACHI mode all 6 SATA work as well as SATA LightScribe, but Express Gate doesn't and boot can be real slow while doing a detect. In RAID, you get hardware RAID plus two more SATA ports but little else. The board was designed under Vista, so there are limited updates for Win 7. The chipset DVD will not load on Win 7. I got an M4A78T-E which is designed for Win 7 but uses DDR3! (Wanna buy some slightly used memory chips?) It uses an ATI SB750 controller. Decided not to even try the RAID though because it is likely to have the same problem. I'll bet RAID is only intended for using the machine as a server. The M4N78 PRO doesn't have an IEEE1394.
Free Windows Admin Tool Kit Click here and download it now
March 1st, 2010 1:30pm

Hi Mark, With 4GB of DDR2 ram and now 4GB DDR3, 2GB on each channel, I have yet to see the page file do anything! With AMD Phenom II Quad core processors, I have yet to see an OS which uses more than 3/4 the available RAM. With RAID 0 or RAID 0+1, the system hardly ever pauses or hesitates. You can build such a machine for under $1000 plus cost of the OS. $100 for case & PS, $150 for MOBO, $150 for CPU, $150 for RAM, $200 - $400 for Drives, $30 for DVD, maybe another $100 for misc. See the cost of the OS has become 10-20% of the cost of the machine if you go Windows. Sorry, I'm a snob. Only go with SATA WD drives. They are fast, reliable, run cool and cheap $0.10 a GB. More video than I can use & Gigabit ethernet come with the MOBO. With multi-port SATA controllers, hot-plugable eSATA RAID drives will be available for around $500. That will be speed, reliability.and portability. The next challenge for OS designers is to separate ALL usercentric info, like in 'AppData>roaming' so that you can swap application program info from machine to machine. The objective is to look at the hardware AND the OS as a SERVICE you just plug into. Then you wouldn't be locked into the machine. Right now I have the same podcasts and e-mail on 5 or 6 machines because they don't know what I have done on the other machine. U3 and other attempts at doing this have been miserable failures to date. Browsing e-mail on even a fast web connection is miserable, not to mention the problems with attachments.
March 1st, 2010 10:53pm

THANK YOU , Mrs. and Mr. georgeZeta ! My story goes like this; Verizon came out yesterday to upgrade my DSL connection to FiOS (Westell UltraLine Series3 Model 9100EM router w/most recent firmware). After the install, I've been trying to shutdown or reboot normally, but could only get as far as the "Windows is shutting down" screen which, of course, forced the hard shutdown. After trying your fix, and several shutdowns and reboots since, on my Dell XPS 435T/9000 (Win7 HP, 64bit) everything is finally back to normal again. Let me add that my error logs - I keep forgetting how handy those things can be - showed similar issues as yours. Also, prior to the Fios install, shutdowns had been working normally. Again, much thanks... SurfCook1.
Free Windows Admin Tool Kit Click here and download it now
April 2nd, 2010 7:49pm

I jave a similar problem, a couple days ago there was an update in the shut down box, I shutdown and it updated. Now when I try to shut down, .... it does shut down but within 5 minutes it restarts on its own, sleep is the same goes down within a few minutes bang back up. The only way to keep it off is to shut down thru start and then pwer off power supply. This just started a few days ago, very irritateing . birda40
April 3rd, 2010 10:07am

I had the same problem. This worked for me: Figured It Out wrote: Try this: 1. Start 2. control panel 3. system and security 4. power options 5. change plan 5. change advanced power settings 6. scroll down to USB 7.click USB setttings 8. click USB selective suspend 9. Disable That should work it did for my husband. We stumbled upon it while trying to fix it. If you notice all of your errors in the log were with the USB device not entering suspend. thanks this worked for me too!
Free Windows Admin Tool Kit Click here and download it now
May 15th, 2010 4:03am

hi, I had the same problem. I don't know if this solution will help you, but it solved my problem. In the first instance I kept my finger on the' power off' button until it closed . Then I went back into the computer as usual. Right click on your windows explorer to the internet connection and highlight 'Run As Administrator'. This solved my problem for the moment.
May 16th, 2010 11:59am

Thank you. That did the trick for me as well.
Free Windows Admin Tool Kit Click here and download it now
May 22nd, 2010 12:51am

I am having the same problem as dreinert. Please let me know if anyone figures out a fix. thanks
May 26th, 2010 4:45pm

Hi GeorgeZeta, Thank you very much. I tried your solution and it works. Now I can sleep peacefully :-D Grazie
Free Windows Admin Tool Kit Click here and download it now
June 7th, 2010 12:18pm

I had the same problem on a Dell Precision M6400 and it came down to the DELL software DCP, when i uninstalled all the DELL software (leaving relevant drivers required) the problem went away and the laptop was significantly faster as well. Hope that helps Pete
June 7th, 2010 2:03pm

Thank you so much!! This worked for me!
Free Windows Admin Tool Kit Click here and download it now
July 24th, 2010 5:19pm

This worked for me, thanks! Had the same issue, on an ASUS system.
August 20th, 2010 6:41pm

Hello i had the same problem well because when the first time you get windows 7 it does that when the first shutdown has begun. however it toke a hour for me to shutdown on ultimate 64 bit.
Free Windows Admin Tool Kit Click here and download it now
December 22nd, 2010 11:46pm

I had the same problem. This worked for me: Figured It Out wrote: Try this: 1. Start 2. control panel 3. system and security 4. power options 5. change plan 5. change advanced power settings 6. scroll down to USB 7.click USB setttings 8. click USB selective suspend 9. Disable That should work it did for my husband. We stumbled upon it while trying to fix it. If you notice all of your errors in the log were with the USB device not entering suspend. My HP Pavilion dv6 with windows 7 was hanging indefinitely at shutdown as well. I tried the fix recommended by george zeta for disabling USB selective suspend. The computer shuts down normally now with no hint of hanging at the logging off screen. I love computer forums! Thanks!
January 27th, 2011 11:04pm

I the same problem like everyone else on the window 7 not wanting to shutdown w/o using the power button. But, once I logged on to windows then it would not do the normal shutdow w/o using power button. Checked the system event log and showed that I might have a hd problem too! Had to put the hard drive in another machine running the same os and it had system file mostly from upgrade to software or uninstalled software. Then ghosted the drive (should have done that first too). But, I went into the system configurator and turned off all startups, but it lefted on all the necessary startups, some of them I turned them back on but I am trying to the memory usage to under 1 gb as I only 2gb of memory, and turned off all after hiding all the microsoft ones. For me ending processes in the taskmgr didn't work for me as it allowed me too turn off that needed windows tasks. So thanks for all your help and microsoft for hosting this forum. Also I purchase the new hard drive 4 months ago, but maybe some of those hard shutdowns gave the hd some of those file problems. thanks again Mike Horrigan
Free Windows Admin Tool Kit Click here and download it now
February 18th, 2011 7:48pm

The following points will provide a better understanding of importance of proper shutdown in Windows 7 operating system: - Safety of filing system - Durability of operating system - Protection of registry values - Protection of hardware Safety of filing system Improper shutdown can cause serious damage to the filling system of hard disk, in severe cases the partition may be corrupted. Windows 7 is a more complex and detailed version of Microsoft and improper shutdown can result in data loss very easily. Durability of operating system A lot of processes are running at the time of shutdown. If the computer is shutdown improperly that may lead to corruption of the operating system. A proper shutdown will ensure the durability of operating system. The performance of the system will remain the same as it was before. Improper shutdown may affect system restore. Protection of registry values Proper shutdown will also protect the registry values. Registry values play an important role in the functioning of the operating system. If the registry keys are damaged they need to be fixed with the help of any registry repairing software. Protection of hardware Improper shutdown can damage the system’s hardware. It is advisable that Windows 7 user should turn off their computer to assure longer life span of hardware. Improper shutdown corrupts driver files and the devices associated with them will not function.Windows 7
February 21st, 2011 8:04am

The following points will provide a better understanding of importance of proper shutdown in Windows 7 operating system: - Safety of filing system - Durability of operating system - Protection of registry values - Protection of hardware Safety of filing system Improper shutdown can cause serious damage to the filling system of hard disk, in severe cases the partition may be corrupted. Windows 7 is a more complex and detailed version of Microsoft and improper shutdown can result in data loss very easily. Durability of operating system A lot of processes are running at the time of shutdown. If the computer is shutdown improperly that may lead to corruption of the operating system. A proper shutdown will ensure the durability of operating system. The performance of the system will remain the same as it was before. Improper shutdown may affect system restore. Protection of registry values Proper shutdown will also protect the registry values. Registry values play an important role in the functioning of the operating system. If the registry keys are damaged they need to be fixed with the help of any registry repairing software. Protection of hardware Improper shutdown can damage the system’s hardware. It is advisable that Windows 7 user should turn off their computer to assure longer life span of hardware. Improper shutdown corrupts driver files and the devices associated with them will not function.
Free Windows Admin Tool Kit Click here and download it now
February 21st, 2011 2:14pm

The following points will provide a better understanding of importance of proper shutdown in Windows 7 operating system: - Safety of filing system - Durability of operating system - Protection of registry values - Protection of hardware Safety of filing system Improper shutdown can cause serious damage to the filling system of hard disk, in severe cases the partition may be corrupted. Windows 7 is a more complex and detailed version of Microsoft and improper shutdown can result in data loss very easily. Durability of operating system A lot of processes are running at the time of shutdown. If the computer is shutdown improperly that may lead to corruption of the operating system. A proper shutdown will ensure the durability of operating system. The performance of the system will remain the same as it was before. Improper shutdown may affect system restore. Protection of registry values Proper shutdown will also protect the registry values. Registry values play an important role in the functioning of the operating system. If the registry keys are damaged they need to be fixed with the help of any registry repairing software. Protection of hardware Improper shutdown can damage the system’s hardware. It is advisable that Windows 7 user should turn off their computer to assure longer life span of hardware. Improper shutdown corrupts driver files and the devices associated with them will not function.
February 21st, 2011 2:14pm

same problem,wont shut down unless i use power off switch & i get a black window everytime i do try to shutdown telling me programmes are running in the background but there are no programmes on the list on that black page.Then i get the shutdown screen & wheel but it will not shut down. Ive looked for the waitsuspeend to edit it in the regkeys (HKey_Current_User/controll desktop) but i dont have that in there or the append controll key. all my drivers are uptodate and correct for win7 use my gc is a gforce 460 dx11 i have 4gb ddr2 800 1tb disk HD space & running win7 Home 64bit on a amd 7850 DC
Free Windows Admin Tool Kit Click here and download it now
March 21st, 2011 10:07pm

*It could be a corrupt virtual paging file. You could recreate it by following these steps: Go to control panel, system, advanced, performance settings button, advanced tab, virtual memory change button. Click no paging file, then set, ok, then reboot. Once rebooted, repeat and if not recreated automatically already, click system managed, ok, reboot. I was getting "Page fault in non paged area" BSOD every other startup, LKGC got it booted without issue but it wouldn't shutdown. Did this and it worked. Thanks
May 27th, 2011 3:38pm

I've had this same problem since I bought an OEM installated Windows 7 machine six months ago. My machine is a Toshia Qosmio X505. The USB ports also do not recognize new devices without a reboot. I believe this is a fundamental flaw in the way Windows 7 works with the underlying computer architecture. The suggestions above on this website show a deflection of responsibility implying that each instance is unique. This is not a unique problem. It is a proliferated problem in Windows 7 and is either a bug in the software or a flaw in the specifications given by Microsoft to hardware developers. In short the emperor (MSFT) has no clothes. My hope is that Microsoft will go back to the design team and give us a system update that will have the operating system working smoothly with the hardware it is intended to operate. How about it Microsoft?
Free Windows Admin Tool Kit Click here and download it now
June 4th, 2011 7:25pm

Some of the time. signed peachesd94
June 19th, 2011 10:17pm

Thank You georgeZeta, I tried this, then I had to "kill" my P C, reboot it, & then I shut it down the normal way, & it worked, I have been reading & looking & killing my machine for about a month searching for a solution, & this is the first one that has worked for me... my thanks to you, again...Don
Free Windows Admin Tool Kit Click here and download it now
June 25th, 2011 5:58pm

Hello. I had the same problem. I gone nuts until I found the solution. The problem seems to be due to badly written Nvidia drivers. Try Disabling the Nvidia Update Service and the NVIDIA Display Driver Service. This is performed thru the Services section in Control Panel. By disabling these two services I get the system shutting down perfectly and even the start will be done more quickly. Those two services allow the Nividia update check and the access to Nvidia settings from Control Panel. Disabling these services does not affect the usage of Nvidia video drivers, it justs disable the icon, context menu and control panel access. Marcelo - un webmaster de Argentina
June 29th, 2011 12:18pm

This topic is archived. No further replies will be accepted.

Other recent topics Other recent topics