Windows 7 RC 7100 hang up on "Please wait" screen
Hello, I have problem with windows 7 RC1 build 7100, it was instaled like new instaltion, not upgrade, one day i switched off computer and next day, when i switched it on, when W7 start to boot, it stuck on "Please wait" and that's all. I tried to boot in to Safe mode, it works, but I don't know what to do now. I tried "Diagnostic sartup" via msconfig and it didn't help, then i tried to repair system files using sfc.exe same result, i tried combofix, but it won't start up at all, then i tried Ccleaner to repair registry and again nothing, also i tried to restore system to last point, it seemed that this restoring point was created before some MS update, but it didn't help, i tried to fine this update and uninstall it, but windows didn't show it. Please help, I don't wanna make reinstalation, i'm using special programs, which need activation etc
October 7th, 2009 2:14pm
Hi Burdin84, Mostly, this issue is cuased by a third party software/driver, could you please do a clean boot to narrow down the issue?How To do It:1. Click Start, type "MSCONFIG" (without the quotations) in the Search Bar and Press "Enter" to start the System Configuration Utility.2. Click the "Services" tab, check the "Hide All Microsoft Services" box and click "Disable All" (if it is not gray).3. Click the "Startup" tab, click "Disable All" and click "OK".4. Restart the computer and test this issue in Clean Boot.
Note: Clean Boot is a troubleshooting step. If some programs have been disabled, we can re-enable them later. If you see the System Configuration Utility, check the box of "Don't show this message" and then click "OK".If the issue still persists after clean boot, please try to check if there is any error message in Event Log. Thanks.
Free Windows Admin Tool Kit Click here and download it now
October 8th, 2009 10:01am
Hi,I tried this and it didn't help, I found 2 error logs
Sluba DCOM zjistila chybu %%1084 pi pokusu o spuštní sluby WSearch s argumenty za úelem spuštní serveru:
{9E175B6D-F52A-11D8-B9A5-505054503030}
Název protokolu:System
Zdroj: Microsoft-Windows-DistributedCOM
Datum: 12.10.2009 15:00:27
ID události: 10005
Kategorie: Není
Úrove: Chyba
Klíová slova: Klasické nastavení
Uivatel: Není k dispozici
Poíta: Poresta-PC
Popis:
Sluba DCOM zjistila chybu %%1084 pi pokusu o spuštní sluby WSearch s argumenty za úelem spuštní serveru:
{9E175B6D-F52A-11D8-B9A5-505054503030}
Kód XML události:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" />
<EventID Qualifiers="49152">10005</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2009-10-12T13:00:27.000000000Z" />
<EventRecordID>22552</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>System</Channel>
<Computer>Poresta-PC</Computer>
<Security />
</System>
<EventData>
<Data Name="param1">1084</Data>
<Data Name="param2">WSearch</Data>
<Data Name="param3">
</Data>
<Data Name="param4">{9E175B6D-F52A-11D8-B9A5-505054503030}</Data>
</EventData>
</Event>
Stav sluby Network Connections byl zmnn na: running
Název protokolu:System
Zdroj: Service Control Manager
Datum: 12.10.2009 15:00:23
ID události: 7036
Kategorie: Není
Úrove: Informace
Klíová slova: Klasické nastavení
Uivatel: Není k dispozici
Poíta: Poresta-PC
Popis:
Stav sluby Network Connections byl zmnn na: running
Kód XML události:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="16384">7036</EventID>
<Version>0</Version>
<Level>4</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2009-10-12T13:00:23.718750000Z" />
<EventRecordID>22547</EventRecordID>
<Correlation />
<Execution ProcessID="448" ThreadID="1172" />
<Channel>System</Channel>
<Computer>Poresta-PC</Computer>
<Security />
</System>
<EventData>
<Data Name="param1">Network Connections</Data>
<Data Name="param2">running</Data>
<Binary>4E00650074006D0061006E002F0034000000</Binary>
</EventData>
</Event>and second
Stav sluby Network List Service byl zmnn na: running
Sluba Computer Browser závisí na slub Server, která neuspla pi spuštní v dsledku následující chyby:
Nepodailo se zahájit závislou slubu nebo skupinu.
Název protokolu:System
Zdroj: Service Control Manager
Datum: 12.10.2009 15:00:25
ID události: 7001
Kategorie: Není
Úrove: Chyba
Klíová slova: Klasické nastavení
Uivatel: Není k dispozici
Poíta: Poresta-PC
Popis:
Sluba Computer Browser závisí na slub Server, která neuspla pi spuštní v dsledku následující chyby:
Nepodailo se zahájit závislou slubu nebo skupinu.
Kód XML události:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7001</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2009-10-12T13:00:25.484375000Z" />
<EventRecordID>22551</EventRecordID>
<Correlation />
<Execution ProcessID="448" ThreadID="512" />
<Channel>System</Channel>
<Computer>Poresta-PC</Computer>
<Security />
</System>
<EventData>
<Data Name="param1">Computer Browser</Data>
<Data Name="param2">Server</Data>
<Data Name="param3">%%1068</Data>
</EventData>
</Event>I hope it says something useful to you, thanks anyway
October 13th, 2009 12:33am