Windows 7 Ad hoc network with iphone problem.
Hello, I have posted this on a third party forum where i found somebody else with the same problem. I will post it here too as a fix has not yet been found. Any ideas will be great. Basically when creating an adhoc network in windows 7. And connecting an iphone to it. the wireless displays "waiting for users to connect", and the iphone is unable to pick up ics via windows 7 or any connection between eachother. However the iphone does seem to think its connected to the network via the wireless icon, windows 7 says nothing is connected. I have tried on vista and it works perfectly. However my computer running ubuntu can connect via windows 7 ics perfectly fine. But i still think this must be a windows 7 problem. I notice than Vista assigns the wireless adapter the address 192.168.0.1 when ics is enabled. The iphone then picks up the following under vista on DCHP ip 192.168.0.x 255.255.255.0 router 192.168.0.1 dns 192.168.0.1 However windows 7 does not assign anything to the wireless adapter, and gives the iphone a 169. ip with a 255.255.0.0 subnet instead. and no router or dchp. I attempted to manually assign the wireless adapter on windows 7 to 192.168.0.1 and also manually assign the correct ips and dns etc in the iphone. But still the same problem. Strange though how i can use the windows 7 ad hoc network on ubuntu but not the iphone. Any ideas? cheers
May 13th, 2009 2:47pm

Hi there, I am having the exact same problem... Iphone gets an IP 169.x.x.x but the computer itself has no IP assigned when connected to the iphone vis adhoc connection. ipconfig says media disconnected. Wifi status says "waiting for users to connect". I can get it to work with XP and Vista. Is this a remained bug to be fixed for Windows 7?
Free Windows Admin Tool Kit Click here and download it now
June 1st, 2009 1:22am

bigfish21 and makak, Thank you for reportingthe interop issue of Win7 adhoc with iPhone. In order for us to investigate this further, we might need your help in enabling some logs on the Windows 7system and sharing them with us. Is it possible for you to email me at huis at microsoft dot com . I can provide you further instructions on enabling the traces as well as the mechanism to upload them to us.Meanwhlie, we will also try to see if we can reproduce this issue locally. Can you please provide the Wi-Fi adapter model and driver version. In an elevated command window, type "netsh wlan show driver" and send back the output.Thanks very much in selfhosting Windows 7 and providng feedback. Hui Shen [MSFT]
June 2nd, 2009 8:48pm

Hi, has there been any progress with this problem? I have a similar though probably unrelated problem. I can create an ad hoc connection which my iphone can join (as long as it's not WPA2 AES. However the connection appears to be very unstable. I want to use the network to run VNC software but because of the instability of the connection my VNC connection keeps being disconnected. I never encountered this problem with Vista or XP. Another problem though this may be on the iphone side of things is that my iphone won't connect to an ad hoc connection with WPA2 personal AES security. My Access point is running WPA2 TKIP and my iphone connects no problem. Could this be a problem with the implementation of WPA2 in ad hoc connections? Unfortunately there is no option for TKIP when creating an ad hoc connection in Windows 7 so I may be stuck with WEP for now. Thanks in advance for your help!
Free Windows Admin Tool Kit Click here and download it now
September 3rd, 2009 4:11am

I have the exact same problem with WPA2 so I changed back to WEP. You say you have an unstable connection.... this sounds to me like you, at last, have a connection (which is great).And no - I have all the same problems as bigfish21 I created http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/thread/cfc75cc7-9009-4636-9c73-ab0f9316bc42/but it seems like the MVP says its an Apple issue. Therefor I went to Apple http://discussions.apple.com/thread.jspa?messageID=10088178#10088178but nothing ever happens. I still think this is a Microsoft issue
September 3rd, 2009 11:05am

I responded in some detail in the new thread that Meegon created. As I state there, there is no doubt that a change in Win7 relative to Vista contributed to this problem, so help from MS with this issue would be much appreciated. My wireless network adapter is the Intel 4965AGN, Microsoft (?) driver version 12.4.1.4 (netw5v64.sys). Hope this helps! -JoeLenovo X61 tablet, Core2Duo L7700 1.8GHz, 4Gb,Intel 965 integrated graphics, MultiTouch/MultiView screen (pen + resistive touch), Intel turbo memory (disabled..), UltraBase docking station.
Free Windows Admin Tool Kit Click here and download it now
September 3rd, 2009 8:38pm

Meegon and Joe,Thank you for reporting this issue. It would be very helpful to collect the Wi-Fi related tracing informaitonfor further investigation. Could you please provide logs for us by doing the following from an elevated/administrator command prompt? Do the following from an administrative command prompt: - Netshtrace start wlan_dbg report=yes - netsh ras set tr * en - Reproduce your problem - netsh ras set tr * dis - Netshtrace stopPlease send %LocalAppdata%\temp\nettraces\nettrace.cab as well as %windir%\tracing Once you are done, wait for the final step to complete (could take a few minutes) and then zip the contents in above folders andsend the file to us. My email is huis at microsoft.com Thanks, Hui Shen [MSFT]
September 4th, 2009 1:31am

Just emailed the log files. Of course while trying to reproduce the problems, things chose to go smoothly. I did manage to run into a timeout error on synchronization while logging was on, which I hope will give a clue about potential issues. I wonder if things improved after I switched to the lowly WEP as opposed to WPA, but for now I'll stop testing and wait to see if Meegon's logs show anything conclusive. -Joe Edit: found an older post I made elsewhere: "I cannot set up a WPA2 ad-hoc connection between my iPhone and my X61t.Lowering the security to WEP allows me to connect.However, I used to be able to synchronize files with Documents to Go just fine once connected to the ad-hoc network in Vista, but with Win7, this does not work. Although D2G does notice the iPhone over WiFi, the 'pairing' process times out." Since then the pairing has worked, but time-outs still occur. Conclusion - it looks like the main issue I have with Docs2Go concerns timeouts. A separate issue may exist with setting up a WPA2 connection, but I haven't delved into this any further. Meegon, just in case, can you try the same with WEP instead? Highly insecure, so use it only to test. Lenovo X61 tablet, Core2Duo L7700 1.8GHz, 4Gb,Intel 965 integrated graphics, MultiTouch/MultiView screen (pen + resistive touch), Intel turbo memory (disabled..), UltraBase docking station.
Free Windows Admin Tool Kit Click here and download it now
September 4th, 2009 6:12am

Hi there...I have sent my trace report to Hui Shen but I am a bit confused about the 'try to repreduce the problem'. The problem is pretty easy to get to, but since the problem does not 'happen' on the Windows site I am a bit confused about for what use the debugging/trace report is worth. In other words: how can a trace report tell why the iPhone does not obtain a valid IP address?If you ask me it should be the trace report from the iPhone that should be useful. Anyway - i recognize that the problem is related to the way Windows 7 pools the IP-address (now that Vista works okay). The stupid question: who not just look at the way Vista does it and then implement the same method in W7?
September 4th, 2009 1:58pm

i forgot about this thread. however i recieved a fix off another forum many months ago. the fix is basically to use an old atheros driver (cant remember which one think it was a vista version). and overwrite the windows 7 driver with that, took alot of messing about to get windows 7 to except the driver i did it so long ago ive forgot but works perfectly.
Free Windows Admin Tool Kit Click here and download it now
September 4th, 2009 2:01pm

I recall reading that thread (you're famous), but I think most users there shared the same Atheros wireless card. The relevant thread is here:http://windows7forums.com/windows-7-networking/5397-ad-hoc-network-problem.html. Could still be the same issue though. -Joe Edit: just noted that in that thread a user claims that that the problem did not exist in one of the Win7 betas. Perhaps go over some of the late changes to networking? Lenovo X61 tablet, Core2Duo L7700 1.8GHz, 4Gb,Intel 965 integrated graphics, MultiTouch/MultiView screen (pen + resistive touch), Intel turbo memory (disabled..), UltraBase docking station.
September 4th, 2009 3:08pm

This driver, to overwrite the new one with, isnt that marked on a specific brand? Am I right saying that it wont change a thing for my laptop which is a Dell?
Free Windows Admin Tool Kit Click here and download it now
September 4th, 2009 6:42pm

no mate i think it was a generic driver for the atheros 5007 chip ill hunt out the thread for u in a little while with the driver there.
September 4th, 2009 6:48pm

Yes that would be the thread :) i dont know what wireless chipset your using but if your using atheros this should fix your issue. im using atheros 50007 on an asus laptop Downloaded this http://download.boulder.ibm.com/ibmdl/pub/pc/pccbbs/access_ibm_br/7kcna5ww.exe Installed under XP compatibility mode. Works perfect. alternatively if your not using atheros 50007 id take a guess at finding the equivelent xp driver for your chipset and install it in XP compatibility mode. Ive installed a more recent build of win7 on a broadcom based laptop will give the phone a try on that when i get a chance see if it works "out the box" so to speak.
Free Windows Admin Tool Kit Click here and download it now
September 5th, 2009 1:45am

just tested windows 7 on a broadcom wireless machine and same problem with win7 drivers.
September 5th, 2009 2:24am

I came accross your other thread and tried the XP driver for my wireless card to no avail. Still waiting and hoping that this gets figured out! I will run the trace/log as soon as I get a chance. It might not be for a week or so though.
Free Windows Admin Tool Kit Click here and download it now
September 5th, 2009 2:56am

that driver is only for the atheros 50007EG chip.
September 5th, 2009 2:59am

I know. Mine is a Realtek card. I used the Realtek XP/Vista drivers but like I said, no joy. Very frustrating! This exact same set of hardware had no problems under Vista!
Free Windows Admin Tool Kit Click here and download it now
September 5th, 2009 3:22am

Hi, I have this same problem and was wondering if anyone could tell me where to get the driver (the link dosen't go anywhere anymore) or, if this problem will be fixed in the final version of windows 7because i can just wait a few days.
October 20th, 2009 1:04am

just tested windows 7 on a broadcom wireless machine and same problem with win7 drivers. I am experiencing the same problem and I am using broadcom chipset on both cards. One is a PCI card which is set as ADHOC and the other is a PCMCIA connected to laptop. I have ICS enabled on the wlan card which is set as AD-HOC. But the client WLAN notebook does not get the IP address. And even if I manually type in the address 192.168.137.5 it still wont work. Even if I then ping 192.168.137.1 I receive no reply. This has got to be a bug in Win7
Free Windows Admin Tool Kit Click here and download it now
October 30th, 2009 7:49pm

I was having the same issue and found that using WEP instead of WPA2 (the default) worked without a hitch.
December 4th, 2009 6:49am

Hello everybody, I am having the same problem and I could not figure out what the solution is. Would you please take a look at it and give me some comments or solution: Previously, I used Ad hoc connection and ICS to get the internet connection to my iPod through my laptop WiFi. It worked perfectly under Windows XP and Windows Vista. Two months ago, I installed Windows 7 and I also configured my ad hoc connection to surf internet on my iPod. It worked for several weeks. After that it stopped working. I did not do any serious things to my iPod but I did some updates from Microsoft. Do you think that those updates can break the ad hoc connection? Of course, previously, I also used the WEP encryption. My WLAN card has the Atheros chip, its serial is: Atheros AR5006X. I tried to install the official drivers from Atheros for Windows Vista (they do not say any thing about Windows 7 therefore I suggest that the drivers are the same). It did not work. Now, after creating the ad hoc connection, my iPod even could not join the network. Nevertheless, my iPod can quickly connect to any access point (in my school) thus I think that it would not be a problem of iPod but the problem of Windows 7. If you have any idea, advice or comment, please tell me and I will really appreciate it. Thank you very much! Tran Trung Luu
Free Windows Admin Tool Kit Click here and download it now
January 24th, 2010 8:13pm

how about Connectify Easily connect any number of WiFi enabled devices to your network including laptops, phones, gaming systems, and more.http://www.connectify.me/
January 24th, 2010 8:42pm

Dear Bubbapcguy, Thank you for your suggested solution. I tried the Connectify for several times and it did not work (I could not connect to the network created by Connectify either). Furthermore, I figured out that the Connectify employs the WPA encryption method (as a default technique, there is no option to change it) thus it is impossible for the iPod (iPhone) to be connnected (it utilizes the WEP encryption). The procedure of Connectify is just enabling the ICS and ad hoc connection as we can do manually with much more customization. Would you give me any idea?
Free Windows Admin Tool Kit Click here and download it now
January 25th, 2010 7:06am

Dear Bubbapcguy, Thank you for your suggested solution. I tried the Connectify for several times and it did not work (I could not connect to the network created by Connectify either). Furthermore, I figured out that the Connectify employs the WPA encryption method (as a default technique, there is no option to change it) thus it is impossible for the iPod (iPhone) to be connnected (it utilizes the WEP encryption). The procedure of Connectify is just enabling the ICS and ad hoc connection as we can do manually with much more customization. Would you give me any idea? I have the same problem. If I try to connect with Nokia 5800 or a notebook to this adhoc network it connects to the network but never gets IP. Even if I manually input IP it still won't ping. Have been talking to M$ support about this issue for a week and no solution came out except change the network card. Which I did and it did not help.. Strangely on Win XP this works without problem.
January 25th, 2010 11:13am

I had a similar problem connecting a second laptop. Connectify has fixed my problem! Thanks Bubbapcguy! Regards, Steve
Free Windows Admin Tool Kit Click here and download it now
March 26th, 2010 2:03pm

I read all your case and proff some things. Now I have "my solution." Windows 7 assing 192.168.2.1 ip and 255.255.255.0 at first time that I create the ad-hoc connection. I write in my iphone configuration 192.168.2.172 , 255.255.255.0 ,192.168.2.1 (router) and DNS in my case 80.58.0.97, 80.58.0.33. After all this I reinstalled the ultimate drivers to my lan and wifi adapters. Sorry for my english.
April 11th, 2010 3:31pm

I solve it with WEP encryption. WES didn't work. (on Lenovo T510 with Realtek Wlan card driver) All on Win7 to connect iPhone for sharing internet connection. Now it's working fine.
Free Windows Admin Tool Kit Click here and download it now
June 1st, 2010 8:25am

I have tried both "Connectify" and Windows 7 native ad-hoc connection setup manually. I was able to succeed to connect iPhone with both connections (in seperate instances) but both have stability problem. Once it got disconnected it is very difficult to reconnect. Out of the severel tries which included even restarting PC, 2 or 3 times iPhone got connected with DHCP (yes iPhone got IP address 192.169.2.XX from DHCP) with wireless security enabled. Another problem I find is the hardcored Gateway address 192.168.2.1 for the ad-Hoc and Connectify connections. I already have a router running in the network with the same address and I don't want to change it's address. How we can change the gateway address on windows 7 native Ad-hoc connection (ie from 192.168.2.1 to something like 192.168.4.1) ?
July 15th, 2010 9:03am

Dear All, I still have such problem no matter I switch off the security or not. I am using Win7 x64 with Intel 6200 AGN latest driver 13.3.0.24. May I know does anyone can help me to solve? Thanks a lot!
Free Windows Admin Tool Kit Click here and download it now
August 30th, 2010 12:21pm

My problem seems to be solved. I was using a Linksys USB adaptor (WUSB300N) which was seems to be unstable. Now I used another USB adaptor (Alfa long range Taiwan made) and infact was much cheaper than linksys and now I can almost connect iPhone to Wifi internet with minimal of interruptions. So the these problems might be related to either the installed drivers for wireless adaptor or either the problems of hardware it self. Regarding hardcored gateway address 192.168.2.1 which could actually we can change from registry. I don't remember the exact places to be edited, But search for "192.168.2.1" in values without quotes and replace to other IP range such as 192.168.4.1 or a suitable gateway address that does not conflict with existing gateways in the network. and (may be a restart required, does not mind just restart). After this the network gateway conflict problem was solved ( iPhone got ip address in the new gateway address series)
August 30th, 2010 1:11pm

I have the same issue. Win7 x64 with Intel 6300 AGN drivers. How do we get to connect Win 7 to an ad-hoc network on the iPhone?
Free Windows Admin Tool Kit Click here and download it now
December 3rd, 2010 7:30am

Dear All, you can download Connectify on window 7 from here: http://www.connectify.me/docs/index.html?v=2.1.0.16429#basic Then you can make your wlan-card as accses point via this software. Now it's working fine.
December 8th, 2010 8:36am

Thank you .... I found a solution with this .....
Free Windows Admin Tool Kit Click here and download it now
January 4th, 2011 4:11am

Windows 7 Adhoc network network for Iphone 4 First of all remove the generic drivers of Windows 7. Download the drivers of the wireless network card from manufacturers site and install. Open Network and sharing center - > Set up a new network - Set up a wireless ad hoc -> Next- Next -> Network name , WEP and password-> Share my internet connection ..Done! Cheers Iphone aficionado
February 21st, 2011 1:34pm

I was having the same issue and found that using WEP instead of WPA2 (the default) worked without a hitch. Resurrecting this thread from the dead.. I too am having problems getting a device (iPhone) to connect to my Windows 7 ad-hoc WPA2-Personal wireless network. I must lower the security to WEP. Any ideas? Was anyone else ever able to accomplish this?
Free Windows Admin Tool Kit Click here and download it now
May 10th, 2011 12:51am

Hello Hunter DG I agree. My iPhone works if the security is WEP.
May 24th, 2011 8:48pm

But connectify seems to have conflicts with PPPoE used to connect to internet in China. Any clue how to fix this?
Free Windows Admin Tool Kit Click here and download it now
June 28th, 2011 12:26pm

This topic is archived. No further replies will be accepted.

Other recent topics Other recent topics