Wi-Fi Issues in Windows 7 build 7100(RC) here.
I am having issues with my network connection on my Windows 7 build 7100. I get a "Limited Connectivity" and "No internet access"while in fact they should be available. My router is being detected on my laptop but does not connect to the internet.So, I thought i'd put up all I've done with experimenting up here, so that MS can fix it quickly.Here's my system Configuration:Acer Aspire Notebook 4520AMD Athlon 64 x2(2.0 Ghz, 2*256KB L2 cache)Nvidia Geforce 7000M.2Gib DDR 2.Broadcom 802.11 b/g wireless adapterwith Nvidia nForcenetworking controller.Windows 7 build 7100(Public RC).UTStarcom Wirelesss router model WA3002G4 (This is my Access Point).Symptoms:1. After system boots, wireless connectivity works flawlessly. But the working state only lasts for what appears to be a random interval of time(sometimes a minute or two, at other times in excess of 30 minutes).2.The system then loses INTERNET connectivity. The taskbar icon shows an '!' mark and reports "Limited Connectivity".The system still continues to detect the wireless router however!3.Restarting the system causes an unusually lengthy shoutdown(4-5 minutes sometimes!).4.However, after restart, wireless connectivity is completely restored. Note that, the router(UTStarcom) has remained on throughout the process.5.Resetting the router(UTStarcom) while the system remained ON does not cure the problem.6.When switching to ethernet AFTER the problem has occured (with WiFi)( i.e Wifi adapter on the laptop disabled(via a switch on the laptop),and the ethernet chord plugged in later),the icon on the taskbar continues to show "Limited Connectivity" and "No internet access". However, I CAN connect to the internet through IE8 or Firefox.7. The problem DID NOT EXIST in Windows 7build 7000.Troubleshooting steps adopted:1. Typical troubleshooting was to try to disable the wireless card and then re enable it using the Device Manager. However, Device Manager hangs after clicking on Disable.2. Tried to randomize identifiers for ipV6 using netsh interface ipv6 set global randomizeidentifiers Dos command. But, the problempersists. I have now reset the identifiers.3.Tried to set the poweroptions to "High Performance", hoping the problem was associated with power. But no dice there either.4.UpdatedWindows 7 through Windows Update. The system is fully updated but the problem persists.5.Installed the latest drivers from both Nvidiaand Broadcom, to no avail.Personal Conclusions:Because I can still connect to the router(UTStarcom) with myDELL(Which has Windows Vista),and becausethe problem is only occuringsince I installed the Windows7 RC, I'm inclined to believe that the problem is with Windows. Further, my online exploitsto solve this problem show that the Nvidia nForce networking controller appears common in most of the cases with this problem. Nevertheless, it is extremely puzzling why a build almost 3 months older than the RC, performed stably withwireless networking, while this one cant!Symptom 6, seems to lead to the fact that, perhaps, an internalWindows process seems to have "hung" (causing the system to fail to update the ethernet connection settings), which may the reason why the router is detected but still we have no internet access. I also remember to have read somewhere,someone saying that he noticed that when the problem occured, windows was not adhereing to the protocol's time-out periods.I also have suspisions on whether this could be related to faulty WEP encryption/decryption on Windows side.
May 8th, 2009 8:07am

I to am having the same problem except when i boot up internet works flawlessly, but when i close the lid and it goes to sleep, i will come back and open it up and it shows limited connection. I have to reboot after coming out of sleep if i want to use the internet. I would also like some help with this issue
Free Windows Admin Tool Kit Click here and download it now
May 8th, 2009 6:35pm

I'm having the same exact problem. I have two versions of Windows on my laptop. The Windows 7100 RC and the Windows 7000 Beta. The Beta (which I'm booted into now) operates flawlessly in terms of wireless. The RC boots up, works ok for a minute or two, then stops. Troubleshooting never works, disconnecting and reconnecting never works. Even plugging in an ethernet cable didn't work. Not sure what the problem is but it sucks because I upgraded the Vista side of the machine into RC1 because I loved the Beta so much.
May 8th, 2009 8:56pm

Read this http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/thread/1b4d475d-f2e1-44f5-a96b-829b48b5e3de
Free Windows Admin Tool Kit Click here and download it now
May 8th, 2009 9:03pm

thanks but i tried that already. doesn't work.
May 8th, 2009 11:21pm

Are you using Firefox web browser?
Free Windows Admin Tool Kit Click here and download it now
May 15th, 2009 7:47pm

On my test Windows 7 RC1 desktop at work I often get the "Limited Connectivity" warning, but as far as I can tell everything is working fine (I can browse the net fine using Firefox and I get no drops from applications that access systems over the local network). This is a hardwired connection and we don't do wireless. We use Cisco switches/routers. I assumed it has something to do with the way it "discovers" if you have internet access. I'm on a corporate network with over 5000 users that spans the entire state with multiple "main" offices around the state.
May 15th, 2009 8:39pm

I have the exact same problem. Mine is a Dell desktop with a Linksys wireless card.Because of this problem I now have to reboot all the time. It's really frustrating.This did not happen when the exact same hardware set up was running Vista.
Free Windows Admin Tool Kit Click here and download it now
May 15th, 2009 9:55pm

I too am having this problem.(custom pc with linksys wifi card). Luckly I have a second hdd with xp still on. I have tried everything with win 7 even fresh install and still the same wifi problems. any suggestions
May 16th, 2009 1:11am

I have a Linksys Wireless N and am having the exact same problem. I think it is associated with the drivers for x64 version as I am not having any problems at all with x32 on my laptop. I have the exact same symptoms and everything on my main PC which is running 64 bit. If MS could fix this glitch that would be awesome!!!
Free Windows Admin Tool Kit Click here and download it now
May 16th, 2009 2:54pm

On my test Windows 7 RC1 desktop at work I often get the "Limited Connectivity" warning, but as far as I can tell everything is working fine (I can browse the net fine using Firefox and I get no drops from applications that access systems over the local network). This is a hardwired connection and we don't do wireless. We use Cisco switches/routers. I assumed it has something to do with the way it "discovers" if you have internet access. I'm on a corporate network with over 5000 users that spans the entire state with multiple "main" offices around the state. with all due respect...since you're using a "wired" connection, and this is a thread about "wireless internet problems", your comment does nothing to help anyone.
May 16th, 2009 3:36pm

Are you using Firefox web browser? it has nothing to do with the browser. the internet connection plain and simply does not work. I could be using Firefox, Internet Explorer, Chrome, Safari, ____ Netscape Navigator and it wouldn't work
Free Windows Admin Tool Kit Click here and download it now
May 16th, 2009 3:37pm

I have a Linksys Wireless N and am having the exact same problem. I think it is associated with the drivers for x64 version as I am not having any problems at all with x32 on my laptop. I have the exact same symptoms and everything on my main PC which is running 64 bit. If MS could fix this glitch that would be awesome!!! I agree...i think it's a pretty silly oversite and a real slap in the face to people who did upgrades from Vista to 7... my laptop becomes practically useless if it can't wirelessly connect to the internet.
May 16th, 2009 3:38pm

I have the same problem, but it appears to be related with the bittorrent client. I've tryed everything and stills happens when i start the utorrent, bittorrent, or bitcomet.
Free Windows Admin Tool Kit Click here and download it now
May 16th, 2009 9:53pm

I to am having the same problem except when i boot up internet works flawlessly, but when i close the lid and it goes to sleep, i will come back and open it up and it shows limited connection. I have to reboot after coming out of sleep if i want to use the internet. I would also like some help with this issue exactly the same issue as above on my Dell Inspiron 6400, else everything every software is smooth and fast. it never happened on Vista
May 16th, 2009 10:19pm

having same issue 32bit windows 7rc on a acer aspire 5100 when it wakes from sleep it starts getting limited connectivity, after a reboot system works correctly.
Free Windows Admin Tool Kit Click here and download it now
May 17th, 2009 3:42am

I am having the same issue. Windows 7 build 7000 worked fine with all of my hardware and software. Upgraded to RC1 and now I am having this issue with my internet connection. While the connection seems to fail at random there is a sure fire way to make the connection fail. If left alone, my connection may stay up for 5 to 30 minutes. If I start to download a file the connection fails almost instantly. it is like the software (windows) cannot handle the larger amount of data being transfered. If anyone has any ideas I would love to hear then. Thanks.
May 17th, 2009 7:53am

I have exactly the same issue issue, but after reinstalling drivers a couple of times and trying older ones i have it working now but strangly the activity light stays on all the time and does not flicker when in use. Also if I put the laptop (Acer 4520) to sleep I have to first turn off wifi with the manual switch and then it is able to wake up fine, if I dont do that it wakes up fine but then hangs the whole system after about 2 min.
Free Windows Admin Tool Kit Click here and download it now
May 19th, 2009 1:01pm

I have the same exact god dam stupid windows 7 RT problem. However I will take a rigged up fix for now until microsoft has the issue one day settled... I have an ACER 4520. was wondering which driver you installed to get the connectivity to stay. I will of course search myself however knowing the amount of junk out there i was hoping you could point me in the right direction and save myself from searching the entire haystack for the elusive needle. Thank-you.
May 19th, 2009 5:07pm

I am having a similar problem. I have a Thinkpad t60 with an intel pro 3945ABG mini-pci express adapter. I am running W7RC 64 bit. I noticed that when the computer goes to sleep or hibernates, it will have the limited connectivity problem upon wake up. Another strange thing I noticed is that it does receive an ip address and all of the other dhcp information, but instead of picking up the connection at 54mbps it shows up as 1mbps. When it is in this state, I cannot access the internet at all. Nothing seems to help except to turn of the router for 30 seconds or so and to reboot the computer. If you do just one of those you have the same problem. For me, it's just about definitely related to sleeping and not time as I can be connected all day as long as I don't put my computer to sleep. i don't have any torrents running on my computer, and all of my software is pretty vanilla. I hope it is just a driver issue, but is it likely since so many different adapters are having the same issue? Anyway, any help would be great. I like w7 a lot but this is just frustrating.
Free Windows Admin Tool Kit Click here and download it now
May 19th, 2009 5:16pm

HELLO there,I was troubleshooting with something like you are complaining to.And after i google it, i found something INTERESTING...It Work for me, Try it... It is VERY SIMPLE, BUT I DONT KNOW WHY...DISABLE ,,HOME GROUP" from Network and Sharing Center Good Luck for all of you !!BTW I have also an INSPIRON 6400
May 19th, 2009 5:44pm

I am having a similar problem. I have a Thinkpad t60 with an intel pro 3945ABG mini-pci express adapter. I am running W7RC 64 bit. I noticed that when the computer goes to sleep or hibernates, it will have the limited connectivity problem upon wake up. Another strange thing I noticed is that it does receive an ip address and all of the other dhcp information, but instead of picking up the connection at 54mbps it shows up as 1mbps. When it is in this state, I cannot access the internet at all. Nothing seems to help except to turn of the router for 30 seconds or so and to reboot the computer. If you do just one of those you have the same problem. For me, it's just about definitely related to sleeping and not time as I can be connected all day as long as I don't put my computer to sleep. i don't have any torrents running on my computer, and all of my software is pretty vanilla. I hope it is just a driver issue, but is it likely since so many different adapters are having the same issue? Anyway, any help would be great. I like w7 a lot but this is just frustrating. HELLO there,I was troubleshooting with something like you are complaining to.And after i google it, i found something INTERESTING...It Work for me, Try it... It is VERY SIMPLE, BUT I DONT KNOW WHY...DISABLE ,,HOME GROUP" from Network and Sharing Center Good Luck for all of you !!
Free Windows Admin Tool Kit Click here and download it now
May 19th, 2009 5:46pm

I to am having the same problem except when i boot up internet works flawlessly, but when i close the lid and it goes to sleep, i will come back and open it up and it shows limited connection. I have to reboot after coming out of sleep if i want to use the internet. I would also like some help with this issue exactly the same issue as above on my Dell Inspiron 6400, else everything every software is smooth and fast.it never happened on Vista HELLO there,I was troubleshooting with something like you are complaining to.And after i google it, i found something INTERESTING...It Work for me, Try it... It is VERY SIMPLE, BUT I DONT KNOW WHY...DISABLE ,,HOME GROUP" from Network and Sharing Center Good Luck for all of you !!BTW I have also an INSPIRON 6400
May 19th, 2009 5:47pm

I am having issues with my network connection on my Windows 7 build 7100. I get a "Limited Connectivity" and "No internet access"while in fact they should be available. My router is being detected on my laptop but does not connect to the internet.So, I thought i'd put up all I've done with experimenting up here, so that MS can fix it quickly.Here's my system Configuration:Acer Aspire Notebook 4520AMD Athlon 64 x2(2.0 Ghz, 2*256KB L2 cache)Nvidia Geforce 7000M.2Gib DDR 2.Broadcom 802.11 b/g wireless adapterwith Nvidia nForcenetworking controller.Windows 7 build 7100(Public RC).UTStarcom Wirelesss router model WA3002G4 (This is my Access Point).Symptoms:1. After system boots, wireless connectivity works flawlessly. But the working state only lasts for what appears to be a random interval of time(sometimes a minute or two, at other times in excess of 30 minutes).2.The system then loses INTERNET connectivity. The taskbar icon shows an '!' mark and reports "Limited Connectivity".The system still continues to detect the wireless router however!3.Restarting the system causes an unusually lengthy shoutdown(4-5 minutes sometimes!).4.However, after restart, wireless connectivity is completely restored. Note that, the router(UTStarcom) has remained on throughout the process.5.Resetting the router(UTStarcom) while the system remained ON does not cure the problem.6.When switching to ethernet AFTER the problem has occured (with WiFi)( i.e Wifi adapter on the laptop disabled(via a switch on the laptop),and the ethernet chord plugged in later),the icon on the taskbar continues to show "Limited Connectivity" and "No internet access". However, I CAN connect to the internet through IE8 or Firefox.7. The problem DID NOT EXIST in Windows 7build 7000.Troubleshooting steps adopted:1. Typical troubleshooting was to try to disable the wireless card and then re enable it using the Device Manager. However, Device Manager hangs after clicking on Disable.2. Tried to randomize identifiers for ipV6 using netsh interface ipv6 set global randomizeidentifiers Dos command. But, the problempersists. I have now reset the identifiers.3.Tried to set the poweroptions to "High Performance", hoping the problem was associated with power. But no dice there either.4.UpdatedWindows 7 through Windows Update. The system is fully updated but the problem persists.5.Installed the latest drivers from both Nvidiaand Broadcom, to no avail.Personal Conclusions:Because I can still connect to the router(UTStarcom) with myDELL(Which has Windows Vista),and becausethe problem is only occuringsince I installed the Windows7 RC, I'm inclined to believe that the problem is with Windows. Further, my online exploitsto solve this problem show that the Nvidia nForce networking controller appears common in most of the cases with this problem. Nevertheless, it is extremely puzzling why a build almost 3 months older than the RC, performed stably withwireless networking, while this one cant!Symptom 6, seems to lead to the fact that, perhaps, an internalWindows process seems to have "hung" (causing the system to fail to update the ethernet connection settings), which may the reason why the router is detected but still we have no internet access. I also remember to have read somewhere,someone saying that he noticed that when the problem occured, windows was not adhereing to the protocol's time-out periods.I also have suspisions on whether this could be related to faulty WEP encryption/decryption on Windows side. HELLO there,I was troubleshooting with something like you are complaining to.And after i google it, i found something INTERESTING...It Work for me, Try it... It is VERY SIMPLE, BUT I DONT KNOW WHY...DISABLE ,,HOME GROUP" from Network and Sharing Center Good Luck for all of you !!
Free Windows Admin Tool Kit Click here and download it now
May 19th, 2009 5:55pm

I tried your little disable home group! doesnt work... nothing works... Ive tried regedit... ive tried everything... I hope someone has informed Windows there is a major problem with this little WLAN and windows 7 RT... I hope its fixed soon i will check everyday for an update or drive update. However I am forced to restart my computer everytime... I might just jump ship and bite the bullet and go back to vista! I really dont want too.... HOW IS EVERYONE ELSE MAKING OUT?
May 20th, 2009 12:43am

Any luck I have tried everything ever posted on a forum so far nothing had worked for me! how about you?
Free Windows Admin Tool Kit Click here and download it now
May 20th, 2009 12:44am

nothing worked. I'm going to install vista again. I'm not going to buy another piece of *** software. I know is just a RC, but it never happen in the beta, so i don't know why it broke up after... What are they doing? vista 2?
May 20th, 2009 12:47am

Same problem. regular internet browsing.. suddenly wireless stop. I am glad I had time to write this post. I never know how long time I am given on the net... Rebooting is the only remedy.. My machine is useless now. Acer TravelMate 5510
Free Windows Admin Tool Kit Click here and download it now
May 20th, 2009 1:04am

HELLO! can any one from Microsoft hear us? whats the use of this forum if MS tech guys cant respond on this simple problem. going back to Vista soon if this problem is not sorted out soon.
May 20th, 2009 1:36am

Same problem. regular internet browsing.. suddenly wireless stop. I am glad I had time to write this post. I never know how long time I am given on the net... Rebooting is the only remedy.. My machine is useless now. Acer TravelMate 5510 Ok, so right after i posted this, I noticed that an update for my Broadcom 802.11g Network Adapter was ready for download and install at Windows Update. ofcourse my networked hanged, but i restarted, and did the update. And now everything seems to work just fine!!! great! 30min online, downloaded big files, no problem so far!
Free Windows Admin Tool Kit Click here and download it now
May 20th, 2009 1:37am

how do you disable home group exactly?
May 20th, 2009 1:50am

So i downloaded the new updates from windows and it seems to have worked for my wireless... I have to be honest... i tried everything right up until the point of reading movemats post... it has been on for a consistent 1h 57min.... GOOD LUCK BOYS I hope Im never back to the forums again... except to say i love this program except for this glitch...
Free Windows Admin Tool Kit Click here and download it now
May 20th, 2009 5:17am

Running Windows 7 RC 7100 x64 My wireless adapter is the Rosewill RMX-N2X Wireless N USB. Wireless worked flawlessly in Windows 7 7000 Beta. Wireless works fine on my Windows 7 RC 7100 x86 on my netbook. Ever since the I installed 7100 x64 on my home PC though, my wireless has been going dead. The link light dies, the status shows Limited Connectivity (No Internet), and anytime I try to access ANYTHING related to networking, it freezes up. I've even had one blue screen. I've tried 4 different fresh installs, problem persists. I've tried the disable IPv6, problem persists. I've tried the turn off let Windows turn off device to save power option, problem persists. The only way to temporarily restore wireless is a full power cycle, but the problem just comes back again anywhere from a half hour to 5 hours.
May 20th, 2009 7:37am

how do you disable home group exactly? folow this steps :- Open Network and Sharing Center- in the left panel chose HomeGroup from Down Left Side- Then read and Disable this monster...Good luck
Free Windows Admin Tool Kit Click here and download it now
May 20th, 2009 10:14am

i was unable to connect to a wireless router trough my msi wireless lan card. Even with the original driver the card doesn't install.
May 20th, 2009 11:41am

how do you disable home group exactly? folow this steps : - Open Network and Sharing Center - in the left panel chose Home Group from Down Left Side - Then read and Disable this monster... Good luck @ catalinux I have tried this by "leave HomeGroup" option there is no option "disable home group". Can you please guide us step by step how can we do this. How to test it? does it need a restart? or what not? thanks.
Free Windows Admin Tool Kit Click here and download it now
May 20th, 2009 1:51pm

how do you disable home group exactly? folow this steps :- Open Network and Sharing Center- in the left panel chose Home Group from Down Left Side- Then read and Disable this monster...Good luck @ catalinux I have tried this by "leave HomeGroup" option there is no option "disable home group".Can you please guide us step by step how can we do this. How to test it? does it need a restart? or what not?thanks. Sory about missinformation There is no DISABLE word, the method is : LEAVE HomeGroup andafter thatis no need to restart your machine, this method aplies instantly... just try..step back to thecomputer about lets say 5 to 30 minutes and you will see that problem no longer exist...
May 20th, 2009 2:45pm

I hope this helps... 1. click "start" 2. click "control panel" 3. click "network & internet" 4. click "network sharing center" 5. click "advanced sharing settings" 6. click the "^" associated to "home or work" 7. scroll to the bottom you will see "homegroup connections" 8. click "use user accounts and passwords to connect to other programs" I hope this is the one. I used it and updated my windows and the problem seems to have disappeared...
Free Windows Admin Tool Kit Click here and download it now
May 20th, 2009 2:53pm

I hope this helps... 1. click "start" 2. click "control panel" 3. click "network & internet" 4. click "network sharing center" 5. click "advanced sharing settings" 6. click the "^" associated to "home or work" 7. scroll to the bottom you will see "homegroup connections" 8. click "use user accounts and passwords to connect to other programs" I hope this is the one. I used it and updated my windows and the problem seems to have disappeared... Thanks so much for the step by step help, but "when i close the lid and it goes to sleep, i will come back and open it up and it shows limited connection ". This problem is not fixed :(
May 20th, 2009 5:08pm

Ha. I messed around with stuff trying to fix the problem and now I can't hibernate either. The screen goes blank, but the hard drive light is lit up continually (all night yesterday!). All you can do is a hard power off and restart. W7 complains about it on reboot, and I still have the same network problems. Good grief. Is this a late april fool's joke or something?
Free Windows Admin Tool Kit Click here and download it now
May 20th, 2009 7:04pm

All of this sounds like driver problems. I have a ThinkPad T61 with absolutely no problems. The T61 has Intel 82566MM Gigabit wired connection, and Intel 4965AG WiFi.However, I do NOT use sleep. Sleep causes more problems than it solves, IMO. Hibernation/resuming works fine, however. Using 64 bit RC.Also 7 hibernates MUCH MUCH faster than Vista. Vista would take a minute or 2, 7 hibernates (even with more RAM!) in about 20 seconds.
May 20th, 2009 10:41pm

Hi I am having the same issue. I have brand new HP laptop. I was not having connectivity issues until I downloanded the RC version of Windows 7. I allow others to use my wifi router and they have no issues. I get a message saying low connectivity or no connection at all. I use Windows 7 find fix and repair option and it always works......for a little while and then I have to repeat the steps.The repair says check my wireless card ....and I swear thats not the issue. Any ideas on how to fix. By the way I use have AMD Turion X2 64.thanks
Free Windows Admin Tool Kit Click here and download it now
May 20th, 2009 11:45pm

On my test Windows 7 RC1 desktop at work I often get the "Limited Connectivity" warning, but as far as I can tell everything is working fine (I can browse the net fine using Firefox and I get no drops from applications that access systems over the local network). This is a hardwired connection and we don't do wireless. We use Cisco switches/routers. I assumed it has something to do with the way it "discovers" if you have internet access. I'm on a corporate network with over 5000 users that spans the entire state with multiple "main" offices around the state. with all due respect...since you're using a "wired" connection, and this is a thread about "wireless internet problems", your comment does nothing to help anyone. With all due respect you are thinking/limiting it to a wireless issue. I'm saying it's NOT just wireless connections. At home (all wireless) I have never had the issue.
May 21st, 2009 3:42pm

Hi, I have much problem whit Conceptronic 54 Wireless (c54ri). I cann't connect to internet. If I connect whit ethernetof mother board, I can connect to internet.
Free Windows Admin Tool Kit Click here and download it now
May 21st, 2009 5:24pm

Hello all. I am also in the same boat. HP dv6000 with a broadcom wireless adaptor. I have tried turning off the homegroup and have installed the windows update for the broadcom card and have done all the same troubleshooting listed in this post. I still show limited connectivity (no internet) but I do have internet and it seems to stay connected now after the update. I can not connect to my work VPN because I need to be connected to the internet (even tho I am). Frustrating. My hardwire LAN is fine. I will post when I find the solution.
May 21st, 2009 7:37pm

Just an update on the hibernation problem. It seems on my Thinkpad T60, W7RC 64bit doesn't like to hibernate when I uncheck the option to allow windows to power off the device to save power. Once I checked that option, bam! I can hibernate again. What a wonderful thing... On another note, I'm not sure what this is all about, but I still have the issues everyone else is having with the wifi connection, like I have the yellow exclamation point and limited connectivity, but if I open up outlook 2007 before I use a web browser, the connectivity problem disappears and I can download my mail, then I can also use the internet. Maybe if I scratch my back with my left pinky while I hop around counterclockwise...all of my problems will go away?
Free Windows Admin Tool Kit Click here and download it now
May 21st, 2009 8:41pm

I solved my problem (Acer Laptop with broadcom wireless adapter) by installing the latest broadcom driver, version 5.10.79.7. No more disconnects or limited connectivity after resuming from sleep or hibernation. Hope it helps some of you.
May 21st, 2009 9:27pm

Hi, Is anyone still having issues after installing latest updates from Windows Update? If so, can you provide the following --- make/model of the Wi-Fi card. You can get this by typing "netsh wlan sho dr" on the command prompt ----make/model of your Wi-Fi router --- problem symptoms --- reproduction steps for problem to happenThanks very much, Taroon Mandhana[MSFT]
Free Windows Admin Tool Kit Click here and download it now
May 23rd, 2009 12:58am

I solved my problem (Acer Laptop with broadcom wireless adapter) by installing the latest broadcom driver, version 5.10.79.7.No more disconnects or limited connectivity after resuming from sleep or hibernation. Hope it helps some of you. I installed the last driver as you told, but after i did it the conection not response, get a red X on the signal icon, i restart the laptop, but the same, the poperties told me that the device is working fine, but i did not get any signal, i had to unistall the driver and install the original driver for HP.Now is working fine, but for how long I do not knowI got a HP Pavilion DV6225USRegards
May 23rd, 2009 3:32am

Finally, after much gooogling and a sh*t load of headache, I've managed to solve my problems with Wi-Fi.Here are the steps i took:1.Uninstall my network driver(Computer Management Console-Device Drivers-NetworkAdapters-Broadcom 802.11b/g-uninstall).2.Uninstall the Broadcom Install utility(Control Panel-Uninstall a program-Broadcom Install Utility-Uninstall). In fact remove ANYTHING that has Broadcom on it!3.Restart System.4.Install Broadcom Driver version 4.102.15.61. This one is an OLD driver. But it works flawlessly(So far!).Here's where i gotit from: http://drivers.softpedia.com/get/NETWORK-CARD/Broadcom/Broadcom-BCM943XX-Driver-4-102-15-61.shtml5.Thats it! No more wi-fi headaches in windows 7 RC!Really, I must say: BEST OF LUCK!
Free Windows Admin Tool Kit Click here and download it now
May 23rd, 2009 7:51am

In fact, you could even use the default windows driver after uninstalling the broadcom utilities.
May 23rd, 2009 8:01am

Finally, after much gooogling and a sh*t load of headache, I've managed to solve my problems with Wi-Fi.Here are the steps i took: 1.Uninstall my network driver(Computer Management Console-Device Drivers-NetworkAdapters-Broadcom 802.11b/g-uninstall). 2.Uninstall the Broadcom Install utility(Control Panel-Uninstall a program-Broadcom Install Utility-Uninstall). In fact remove ANYTHING that has Broadcom on it! 3.Restart System. 4.Install Broadcom Driver version 4.102.15.61. This one is an OLD driver. But it works flawlessly(So far!).Here's where i gotit from: http://drivers.softpedia.com/get/NETWORK-CARD/Broadcom/Broadcom-BCM943XX-Driver-4-102-15-61.shtml 5.Thats it! No more wi-fi headaches in windows 7 RC! Really, I must say: BEST OF LUCK! Thanks buddy it worked for me as well, though I have Dell wireless adapter. I have just uninstall the original one and reinstall it thats it. I have no idea whats the logic behind this but its working. Now my pc is connected back to internet after the sleep mode. :)
Free Windows Admin Tool Kit Click here and download it now
May 26th, 2009 11:15pm

Geely/Ajay, For the current state, can you try to update to the latest broadcom driver on Windows update and see if it works for correctly for you?How did you get this broadcom install utility? Was it present before upgrade?Thanks.Taroon [MSFT]
May 27th, 2009 12:59am

Danverc, Do you also have the broadcom utility installed on your machine?Thanks.Taroon
Free Windows Admin Tool Kit Click here and download it now
May 27th, 2009 1:00am

Ajay.ramesh/Jleecong/Badomens,You all reported that you got "limited connectivity" while you were able to browse the Internet. Do you need to manually configure proxies to reach the Internet? Does it still repro for you? If so could you help us gather the logs so that we can invesitgate the issue further? Here is the tracing instruction (from an elevated command prompt):- netsh trace start nid_wpp capture=yes- repro- netsh trace stopThe last command will print out the location of the cab file and you can send it to tinqian@microsoft.com. Thank you very much for selfhosting windows 7!Tin Qian [Microsoft]
May 27th, 2009 1:14am

catalinux,We are interested in finding out whyhome group was the cause of the router issues that you wereexperiencing. Can you re-enable home group to see the problem still reproes? If so, could you help us collect the logs (from elevated command prompt):- netsh trace start internetclient capture=yes persist=yes- repro (ok to reboot if necessary for the repro)- netsh trace stopThe last command will print out the location of the cab file and you can send it to tinqian@microsoft.com. We will investigate and post back to the forum the findings and recommendations.Thank you for self-hosting windows 7,Tin Qian [Microsoft]
Free Windows Admin Tool Kit Click here and download it now
May 27th, 2009 4:51am

Geely/Ajay, For the current state, can you try to update to the latest broadcom driver on Windows update and see if it works for correctly for you? How did you get this broadcom install utility? Was it present before upgrade? Thanks. Taroon [MSFT] There is one thing i want to highlight: When I have vista installed it detects my WiFi adaptor as a Broadcom. And in W7 it detects as a Dell Wireless 1390 WLAN Mini-card. STRANGE! I got this Broadcom Install utility from this post of [ajay.ramesh Saturday, May 23, 2009 4:51 AM ] I have tried to install the broadcom drivers but W7 detects as the Dell wifi and installs the driver automatically overriding my broadcom installation. As far as upgrade is concerned i am afraid to take the risk of upgrading it form windows update, what if i get the previous bug back to my PC, since my bug is vanished currently.
May 27th, 2009 2:50pm

If your problems are detected in the troubleshooter as driver issues (both for cabled and wireless network), you have to restore your windows at the date of for example 15 of may. i've troubleshooted my problem like that, then i could connect and update my system.
Free Windows Admin Tool Kit Click here and download it now
May 27th, 2009 10:34pm

Danverc, Do you also have the broadcom utility installed on your machine?Thanks.Taroon Taroon,After a short time I got the same trouble, I tried to uninstall again the driver from HP,but I could not do it, so I did a clean instalation again, this time I did not install any broadcom driver, just driver from W7, actually I am not installing the driver from windows update, I had a lost signal for a few moment,and the system conect it again but itself.Regards
May 28th, 2009 3:01am

Dan, do you have the W7 system losing the connection on its own periodically after the clean install?Thanks.
Free Windows Admin Tool Kit Click here and download it now
May 28th, 2009 9:45pm

Same problem. regular internet browsing.. suddenly wireless stop. I am glad I had time to write this post. I never know how long time I am given on the net... Rebooting is the only remedy.. My machine is useless now. Acer TravelMate 5510 Ok, so right after i posted this, I noticed that an update for my Broadcom 802.11g Network Adapter was ready for download and install at Windows Update. ofcourse my networked hanged, but i restarted, and did the update. And now everything seems to work just fine!!! great! 30min online, downloaded big files, no problem so far! The latest driver update fixed the problem for me as well. I have a Linksys Wireless-N network adapater. However, Win7 applies Broadcom driver to it and it worked. It's been 2 days since I last lost network connection.
May 29th, 2009 10:43pm

Dan, do you have the W7 system losing the connection on its own periodically after the clean install?Thanks. Taroon, Actually I do not lose the connection, I downloaded big files, and it is working fine nowRegards
Free Windows Admin Tool Kit Click here and download it now
May 30th, 2009 3:52am

Same problem. regular internet browsing.. suddenly wireless stop. I am glad I had time to write this post. I never know how long time I am given on the net... Rebooting is the only remedy.. My machine is useless now. Acer TravelMate 5510 Ok, so right after i posted this, I noticed that an update for my Broadcom 802.11g Network Adapter was ready for download and install at Windows Update. ofcourse my networked hanged, but i restarted, and did the update. And now everything seems to work just fine!!! great! 30min online, downloaded big files, no problem so far! The latest driver update fixed the problem for me as well. I have a Linksys Wireless-N network adapater. However, Win7 applies Broadcom driver to it and it worked. It's been 2 days since I last lost network connection. I have a Linksys WUSB54GS v2.1 here, and had this exact issue, along with some others. I did a clean reinstall, installed the Windows XP 64bit drivers that I was using in rel7000, which got me onto the web, then I ran an update and installed the drivers recommended byt MS update. That seems to have been the end of my woes!
May 30th, 2009 4:39pm

It's NOT about the Broadcom Install Ultility. It's about DRIVERS. Windows 7 is incompatible with MOST other drives. Typical scenarios are given in detail in my first post( the topic starter post, in fact). Just go to theComputer management console and uninstall whatever Wi-fi driver you have and then in the same console hit Action---Scan Hardware changes. A new DEFAULT driver should be automatically installed and your Wi-fi problems will go away!Hope this helps!
Free Windows Admin Tool Kit Click here and download it now
June 6th, 2009 6:37am

The Broadcom driver are suiatable for several cards including my Linksys WMP300. The drivers have a profound impact on latency. Allowing Win7 to obtain the latest drivers will result in high latency, and for many users this translates into audio problems. The driver with the lowest latency is the one supplied by MS for Vista - 4.102.15.61. However, this release also stops at irregular intervals leaving the adaptor unresponsive, so sorry to say it is not a cure. So, the bottom line: Allow Windows to install and upgrade the driver and have buggy sound and intermittent network failures, or install the 4.102.15.61 driver and enjoy good sound whilst the connection lasts. I agree with other posters that the disconnect issue is driver related. But I would love to hear from MS their take on the problem and a description of what's changed in this area compared to Vista. Manybe we should also be pestering Linksys and Broadcom to investigate too. Duckysan
June 6th, 2009 9:48am

I'm also having this problem. I'm running the x64 bit version of build 7100 on my HP tx1220ca (part of the tx1000 touch family). It has a Broadcom wi-fi with wireless N and I'm connecting to a wireless N network build on a D-Link router. Interestingly when I set the router to broadcast in wireless N mode only, the laptop refuses to connect at all although it can usuallydetectthe router(often it doesn't) while other wireless computers running Vista on the network do not seem to have any issues. This may or may not be related but I thought it strange.While my fianc can connect with her HP laptop running Vista to the wi-fi network without difficulties,my laptop behaves exactly as is described above. It will connect to the network and usually the internet upon a fresh boot if the router is set to broadcast in all modes (802.11 b/g/n). It will stay connected for a seemingly random amount of time ranging from around 1 minute to about 30 minutes. It will then disconnect or show connectivity problems by way of the yellow triangle and exclamation mark and will refuse to connect properly until the system has been rebooted.Occaisionallyit does re-connect and the triangle goes away but nothing on the network is accessibleor even visible despite there being no message indicating limited connectivity and having full bars. The internet is also inaccessible despitean apparently solid connection. Interestingly I do not appear have connectivity problems when the laptop is in tablet mode which lead me to briefly contemplate that maybe the wi-fi antenna had something to do with it until I found this post where it is obvious that others are having identical issues on different hardware. Also, the wi-fi worked flawlessly under Vista on the same hardware only two weeks ago. On a side note, it appears that the connection can be maintained when the laptop is located right next to the wireless router (as in literally on the same desk)so perhaps the issue has something to do with signal fault tolerance/interference? I haven't tested that theory out yet so I'm just floating the idea.TroubleshootingTo troubleshoot the problem (sadly without success) I've installed the latest Microsoft-provided driver for my Broadcom device. The latest driver seemed to actually make the problem worse by increasing the connectivity problems. I've since reverted to an older, HP supplied driver which has allowed me to at least have some connectivity after reboots. I have tried turning the wi-fi device off and then back on with no effect. I have also tried the diagnostic tool several times whichtells that my router needs to be rebooted. I did reboot my router and actually reset it to factory defaults based ondiagnostic advice (and rebuilt the network from scratch as I had to reset and configurea wireless bridge as well) but the issue persists. Seeing as both Vista and the Windows 7 Beta did not have this problem I feel that it must be something in the RC build that is causing the problems.
Free Windows Admin Tool Kit Click here and download it now
June 9th, 2009 10:50am

I am,-- Wi-Fi card: Broadcom 4322AG 802.11a/b/g/draft-n Wi-Fi Adapter-- Router: D-Link DIR-625-- Laptop: HP TX1220ca running x64 Win7 build 7100-- Laptop connects to LAN and internet upon bootup but loses internet connectivity after a varying and seemingly random amount of time. It continues to indicate a strong LAN connection but no LAN resources are visible or accessible. Eventually it indicates aLAN connection loss and will fail to reconnect properly until the laptop is reboot. I had the latest drivers which seemed to make the problem worse and have since gone back to latest HP supplied Vista x64 drivers which allow for consistent connections upon reboots.-- No specific action seems to cause the problem. It simply happens while using the internet after a certain amount of time but will happen for sure if the computer is allowed to sleep.
June 10th, 2009 1:46pm

It's NOT about the Broadcom Install Ultility. It's about DRIVERS. Windows 7 is incompatible with MOST other drives. Typical scenarios are given in detail in my first post( the topic starter post, in fact). Just go to theComputer management console and uninstall whatever Wi-fi driver you have and then in the same console hit Action---Scan Hardware changes. A new DEFAULT driver should be automatically installed and your Wi-fi problems will go away! Hope this helps! ^seconded Tried and tested its working for me.
Free Windows Admin Tool Kit Click here and download it now
June 11th, 2009 1:54am

I have same problem both wireless and wired.. keeps losing connection, I have tried every browser still same thing.. My other 2 laptops side by side does not lose connection, I have updated all drivers etc.. I am using RC ulimate and after 5 mins. I lose connection! I guess the drivers just are not supporting this OSbeta yet? That is only explanation as only have problem with beta version! Christopher
June 11th, 2009 3:31am

I just tried that a minute ago and it didn't work for me. Any other ideas?
Free Windows Admin Tool Kit Click here and download it now
June 12th, 2009 3:31am

Still having similar issues with the Windows 7 RC.I have a HP6730b notebook with an Intel 5100 AGN WIFI network adapter.After boot it takes about 2 minutes before a wireless connections is established.Until the connection is made the GUI shows a limited connection.Odd thing is that with an limited connection I expect to receive an APIPA address. This is not the case. I have tried older intel drivers and newer drivers. This does not seem to make a difference.Currently using the drivers from Microsoft. ( 12.4.1.4)There are a couple of programs that interfere with the network card.Kaspersky AntiVirus 8.0 (beta)Cisco VPN client 5.0.01.0600Trying to uninstall these applications did not resolve the issues.To make things even more puzzling. This issue started a few weeks ago. Before this I have never had this problem. Connection was always established within a few seconds. Unfortunatly I cannot go back in time (system restore) to the period before the problems appeared.I am not sure what more options I have left.I doubt updating router firmware will solve this problem. Other Windows 7 RC clients can connect just fine.Any ideas are most welcome.Remko
July 12th, 2009 10:32am

for some reason my broadcom driver keeps updating by itself...idk why whenever...oh btw I'm doing your procedure by uninstalling it and installing a previous version of it
Free Windows Admin Tool Kit Click here and download it now
July 12th, 2009 6:12pm

It's NOT about the Broadcom Install Ultility. It's about DRIVERS. Windows 7 is incompatible with MOST other drives. Typical scenarios are given in detail in my first post( the topic starter post, in fact). Just go to theComputer management console and uninstall whatever Wi-fi driver you have and then in the same console hit Action---Scan Hardware changes. A new DEFAULT driver should be automatically installed and your Wi-fi problems will go away! Hope this helps! OK i uninstalled the broadcom driver and did the scan hardware changes and it works...but i think it goes back to the same driver version i had that keeps disconnecting after the first couple minutes...i'm not sure
July 12th, 2009 6:24pm

This is a real deal-breaker for me, it is not an issue with XP - it shouldn't be with a NEW operating system at the RC level.. The sad thing is Microsoft does not address nor give guidance for a resolution to the problem. Pathetic.
Free Windows Admin Tool Kit Click here and download it now
July 12th, 2009 10:30pm

I'm having various networking problems across several laptops and a desktop both wired and wireless. The main issue is that I can access certain servers without any problems whatsoever and others are either very slow or just don't connect at all. Sometimes downloading an .exe will finish and will be corrupted as well. Hulu and Nvidia give me problems, for instance, but google and other websites seem to be fine. For instance if I go to www.speakeasy.net/speedtest I can connect and get regular bandwidth speeds with the Washington, D.C. server for instance, but with the New York server my bandwidth trickles down or can't connect at all.
July 12th, 2009 11:43pm

I had the same connectivity issue with my Linksys WUSB300N wireless card. It would connect sporadically and then disconnect after a few minutes. I scoured all the boards, and tried all the fixes to no avail. In a desperate fit of frustration I decided to try something different. I enabled IPV6 and I set up a Homegroup. Voila... flawless ever since. The only reason I suspect this worked was that maybe Windows somehow reset how it saw my wireless card. If you already have a Homegroup set up, try leaving it and setting it up again. Can't hurt, right?Luck to All.
Free Windows Admin Tool Kit Click here and download it now
July 21st, 2009 3:25am

Have the exactly same problem with my Dell inspiron 1520. After a few minutes or so, i lost connection and can't reconnect again. I have to reboot to connect again, but the problem happens again(using 7100). But when i first installed win 7, i did not have any problems and surfed like 7-8 hours without any problem. After, i updated my drivers and the connectivity problem showed up. I will try to uninstall drivers.Hope it works, cuz it really pisses me off, and i am starting to think to use vista again.
July 21st, 2009 4:21am

We are having the same Problems "Very slow WiFi speeds) with lots of different hardware tested!!! We are using the RTM 76000 16385 build. none of the above solutions worked. we had to use LAN 10/100/1000 Cables to "solve" the problem. with LAN cable connected you dont have to do anything from the above (maybe disable QOS in router and Card protocols) But everything works fine, maximum speeds all the time. Wifi after disable-enable works for a while and then just slows down terrible! with the same Hardware we had NO ISSUES in Vista x64 or XP x64. i cant believe Microsoft cant find right away a solution to this serious problem, so far we have found no other issues using the OS.
Free Windows Admin Tool Kit Click here and download it now
July 23rd, 2009 4:44pm

I FIND the solution for me. its all about the damn Drivers After all!ok i managed to make to combine the Windows xp x64 driver and the Vista x64 driver of my TL-WN322G and i made a new 100% workable driver for Windows 7 x64!i have the link here, it will work for some other TP-Link usb wifi too. install it even it says its not signed. The driver works perfectly so far. Also in the ZIP file you will find the TCP-IP optimizer for windows 7/vista, use it and you will gain much more speed and acceleration! TL-WN322G Windows 7 x64 Driver Here: http://synapse.gr/downloads/TL-WN322G Windows 7x64.zip
July 24th, 2009 12:00am

I was having the same problems with build 7100. I tried everything I knew to get this fixed. I spent hours searching the internet trying to find a solution. In the end all I had to do to fix my problem was to change from WPA2 to WEP security on my router and everything has been working perfectly for over a week now. I don't know if this will solve everyone's problem but it certainly solved mine. Hope this helps...
Free Windows Admin Tool Kit Click here and download it now
July 29th, 2009 6:08pm

In fact, you could even use the default windows driver after uninstalling the broadcom utilities. How do I do this?
July 30th, 2009 11:30pm

I built a new system (Intel Core 2 Quad Q6700 Processor 2.66GHz, 8MB Cache, 1066MHz FSB, 4GB RAM, Kentsfield, Quad-Core, OEM, Socket 775, Processor with Intel DG35EC Motherboard - Intel G35 Express, Socket 775, MicroATX, Audio, Video, DVI, PCI Express, Gigabit LAN, USB 2.0, FireWire, Serial ATA), and installed, clean, 64 bit version Windows 7 RC 7100. Using USB wireless Linksys adapter, was getting great speeds to the internet and no problems with just IE8 running. Then I up'd the ante with Windows Live Messenger and Secondlife and evony running. Lag increased and performance decreased and then the internet connection started dropping every 10 minutes, would auto reconnect within a minute and go for 10 more and drop again. Over and over. Very annoying. I noticed the issue started after 7 windows updates were applied from the build 7100 I was at (base 7100?). My Linksys router was already using WEP security. I plan to try some of the ideas I am reading here, but would love to see a windows update come down to fix this issue for all of us once and for all. My other 4 PC's on the home LAN, all wireless, are running Vista and XP home and have no issues.
Free Windows Admin Tool Kit Click here and download it now
July 31st, 2009 12:25am

Taroon Manhana,Latest driver causes this problem.The driver netsh below FIXES this problem (for me at least)Microsoft Windows [Version 6.1.7100]Copyright (c) 2009 Microsoft Corporation. All rights reserved. C:\Users\William>netsh wlan show driver Interface name: Wireless Network Connection Driver : Broadcom 802.11b/g WLAN Vendor : Broadcom Provider : Broadcom Date : 12/19/2006 Version : 4.102.15.61 INF file : C:\Windows\INF\oem18.inf Files : 1 total C:\Windows\system32\DRIVERS\BCMWL664.SYS Type : Native Wi-Fi Driver Radio types supported : 802.11g 802.11b FIPS 140-2 mode supported : No Hosted network supported : No Authentication and cipher supported in infrastructure mode: Open None Open WEP Shared None Shared WEP WPA2-Enterprise TKIP WPA2-Personal TKIP WPA2-Enterprise CCMP WPA2-Personal CCMP WPA-Enterprise TKIP WPA-Personal TKIP WPA-Enterprise CCMP WPA-Personal CCMP Authentication and cipher supported in ad-hoc mode: WPA2-Personal CCMP Open None Open WEP C:\Users\William>
August 7th, 2009 11:13pm

I just installed Win 7 RC on my fiancee's HP DV6600 series laptop and it's having a similar issue to my Tx1000 series. Interestingly though, I brought a Wireless B/G-only router online and her laptop has no trouble connecting to that but it has some issues connecting to our normal D-Link wireless N router. I'm thinking maybe it's a problem related to Win 7 and the wireless N (draft) standard? I haven't yet tried disabling N on the D-Link router because my tx1000 still uses N but perhaps it's simply a problem with "N" and not the router or wi-fi card??
Free Windows Admin Tool Kit Click here and download it now
August 9th, 2009 12:42am

Well, it kinda fixed it for me to use that old driver... It connected coming out of sleep mode, but it started just randomly dropping connection at various other times... i'm back on latest driver and rebooting to be able to connect to internet
August 9th, 2009 1:05am

Same issue here it would seem - mine's Linksys WUSB54GSC / tried multiple drivers and can't seem to get one that makes a difference / the broadcom driver listed won't enable the device to 'start' so no big thing there. Have attempted making the router specific to B only - no difference. Considering looking at a log of FileMon / RegMon to watch when I lose my conectivity but that's a lot to read through. /waits for the update
Free Windows Admin Tool Kit Click here and download it now
August 10th, 2009 1:54am

One other thing I would suggest to check is the power saving setting on your monitor. Usually there is a button or button combination on the monitor you can press which allows you to access its settings. I noticed that whenever my monitor went to sleep, the wireless network would disconnect (even though all the windows power savings settings were disabled). When I turned off power saving on the monitor, the problem disappeared.Hope this helps.Mark
August 10th, 2009 2:13am

same exact problem with me
Free Windows Admin Tool Kit Click here and download it now
August 13th, 2009 5:51am

GUYS Whats the Final resolution to this? Is a permanent solution to look out for the drivers and update them? Can somebody confirm this? I have an ACER ASPIRE laptop and have similar issues since past 2 weeks getting a bit too much.......have to wait too long before it would connect to my WIFI Regards, Chints
August 20th, 2009 3:56am

GUYS Whats the Final resolution to this? Is a permanent solution to look out for the drivers and update them? Can somebody confirm this? I have an ACER ASPIRE laptop and have similar issues since past 2 weeks getting a bit too much.......have to wait too long before it would connect to my WIFI Regards, Chints From what I can say, drivers aren't always the solution for this. It may end up being the solution, but at this point - a lot of the drivers I've tried, for 2 different adapters by the way, didn't solve my issue. What I have noticed though, is that it may have something to do with a udp hit - though I certainly can't confirm this. What ever the action is that's causing this, seems to affect some drivers/adapters differently than others. -With my Linksys - it haults and basicly freezes the driver in place (i.e. can't uninstall / disable successfully - and once attempted, will not allow the shutdown process to complete). Also, removing the Linksys from the USB doesn't show that it's even disconnected. -With my Azio - I can unplug the device from USB, reconnect it - and it syncs back up and says "oh yeah.. there IS a wireless network out there.. I totally forgot.." <-- so it connects again. This is easier than the Linksys of course, but still doesn't help. *Extra info - I've tried with both devices, bridging the connections and made no difference except, that I DID notice, for some reason, that the time it stopped working was different for each device. Still - no way for me to pinpoint the cause for either to stop suddenly without reasonablerepetition. It stillseems random. The thing is though, something is happening that causes the driver to go.. Uhh??? Otherwise, the driver wouldn't work flawlessly for a time and then suddenlystop - nothing 'leading up to the moment.'And it seems to be network associated within Windows 7 build 7100.
Free Windows Admin Tool Kit Click here and download it now
August 21st, 2009 3:06am

Alright Here I am with my issues..... I have a ACER ASPIRE 5920 with W7 7100 Build. As suggested in this thread above, I have changed the workgroup option still not much help. I then looked for the latest drivers on ACERs website for my model nothing there. I then went on the properties of my adapter and then clicked update driver and the windows utility said u have the latest driver. I have run the command of netsh that the Microsoft guys have posted but just saw an output as they have pasted not too sure how running that command would fix that issue...........but did basically all that I could reading on this page but no luck so far. Can somebody suggest anything new or any steps in m above mentioned troubleshooting that they think I might have missed? Any help would thoroughly be appreciated. The people from Microsoft.............throw some light please!!!!!!!!!!!!! Regards Chints.
August 22nd, 2009 3:44pm

Alright Here I am with my issues..... I have a ACER ASPIRE 5920 with W7 7100 Build. As suggested in this thread above, I have changed the workgroup option still not much help. I then looked for the latest drivers on ACERs website for my model nothing there. I then went on the properties of my adapter and then clicked update driver and the windows utility said u have the latest driver. I have run the command of netsh that the Microsoft guys have posted but just saw an output as they have pasted not too sure how running that command would fix that issue...........but did basically all that I could reading on this page but no luck so far. Can somebody suggest anything new or any steps in m above mentioned troubleshooting that they think I might have missed? Any help would thoroughly be appreciated. The people from Microsoft.............throw some light please!!!!!!!!!!!!! Regards Chints. Cab somebody Suggest something?? I am sick of this problem...................
Free Windows Admin Tool Kit Click here and download it now
August 26th, 2009 12:20pm

Hi all, I'm also having wireless problems, be grateful for any help. Running Win 7 64bit Build 7100. To start with, I had a bit of internet connectivity, but it's completely gone now, and I usually can't even connect to the wireless network. I've tried connecting to another network within range (BTOpenZone etc) and this works, which leads me to think it's an issue with my router? Router is a Sagem f@st 2504 provided by Sky. Using two other computers on the network wireless and they work fine (Vista 32-bit and XP). Wireless PCI is a Tenda W54P running the Ralink RT61 Firmware (26/02/2007 -- v.2.0.7.0). Thanks for any help.
August 26th, 2009 12:58pm

Alright Here I am with my issues..... I have a ACER ASPIRE 5920 with W7 7100 Build. As suggested in this thread above, I have changed the workgroup option still not much help. I then looked for the latest drivers on ACERs website for my model nothing there. I then went on the properties of my adapter and then clicked update driver and the windows utility said u have the latest driver. I have run the command of netsh that the Microsoft guys have posted but just saw an output as they have pasted not too sure how running that command would fix that issue...........but did basically all that I could reading on this page but no luck so far. Can somebody suggest anything new or any steps in m above mentioned troubleshooting that they think I might have missed? Any help would thoroughly be appreciated. The people from Microsoft.............throw some light please!!!!!!!!!!!!! Regards Chints. Cab somebody Suggest something?? I am sick of this problem................... WHAT ARE the guys working at microsoft doing? Can anybody throw a light as to has this thing got to do anything with WPA2-PSK as the network security or its just that issue with W7.............Come on guys lets find something to eradicate this its ridiculous to wait for 15 mins after the laptop boots/comes out of sleep to get your wifi up............
Free Windows Admin Tool Kit Click here and download it now
August 30th, 2009 5:08am

Have you ever tried pinging your router? If you can ping your router, try accessing the setup page. This simple test will prove that your wifi works and your problem is with the router. If you can ping your router try pinging a webpage, if you get an eeror saying host name can't be found, it's DNS. the simplest way to fix this is to set your PC to auto dns, and reboot modem, router, then PC. there are comands you can do but this is the most simplest. The below is if ping fails If you can see your router on network sharing menu, then it means your PC is broadcasting it's presence to your network got a replay back. Ping will verify with 4 echo send and replies. If your misses some but not all of it, then you know that connectivity is there but not functioning right. solutions for that are to decrease distance from access point, use latest drivers for product (I have had pretty good success using vista drivers, just remember to download the edition you need 32-bit or 64-bit), and disable any wireless security you have if any. Having the wrong encryption leads to limited connectivity error. Other things to check. If ou have any other device connected to wifi and it has a static IP (manual configured), ensure its out of dhcp range of router, two IPs can't exsist on network. this also can cause that limited internet error. i am 95% certain that IPv6 is not even used from your network all the way to your ISP. Your ISP handles all the IPv6 when translating your ISP assigned IPv4 addres to a global IPv6 address.
August 30th, 2009 10:06am

I actually have a ping test constantly up pinging my router - when the ping is unsuccessful - that's when the connection stops - security and bootup may be a spinoff of the origional issue but the main problem remains. It works for a while, and suddenly without warning it pops off. Oddly enough though - last night it was solid for about 13 hours but this morning it lost connection about 4 times without any commonality as to what I - the user - was doing. No background programs out of the ordinary but again, this stems from build 7100. Bleh..
Free Windows Admin Tool Kit Click here and download it now
August 30th, 2009 8:12pm

Matetakezo808, The problem here is that whenever the laptop boots up fresh and or comes out of sleep and tries to hop onto the home wifi router it would take too long to get through the connection process. Having said that, the amount of time it takes (atleast for me) to get onto Internet after getting connected to the LAN(my home router) is barely minimal. IF your post above was as a reply to my problm I dont think it falls inline with the issue. You are tellng me to ping the router but how can the laptop ping the router when it is not on a network(in this case Lan). The problem is WIFI taking too long to connect. which means none of us are having any other wired conneciton apart form this wifi connection going to the ROUTER....then how can the PC ping the router when it is not connected at all. All, For the others following this issue..............would just like you guys to note something.....just as in my last post I had mentioned...I scratched my head and thought of a time when this was working fine and i recollected that when i was on WPA-PSK i didnt feel that this was ever a problem......so to verify this from past couple of Days i have downgraded the security on my wifi network from WPA2-PSK to WPA-PSK and the connection time is much much better. so all you guys in pain like me can try this out and post the responses here so we know if this is a one-off success or the right work-around.
August 31st, 2009 8:09am

I am having problems with both my Wi-fi and wired connection. Laptop: Gateway CX2620 Tablet My wireless card is Intel Pro/wireless 2200BG My ethernet is Broadcom Netlink Gigabit Ethernet I am connected via WPA-PSK [TKIP] Router Model: Netgear WGT624v3 Hardware Version V3H1 Firmware Version V2.0.16_1.0.1NA Problem: Condition -During only a wifi connection Other computers, Vista with WIFI, XP with Ethernet both have working internet connections during this entire test. Connection and internet access works fine over long periods of continuous use 3 hrs+ Access to router via IP through webbrowser eg. 192.168.0.3 If left to idle for a period of time (5-30+ minutes), a triangle will appear in the system tray over the wireless icon. Internet cannot be accessed from any web browser. System reports that there is no internet access. System reports that the computer is connected to the network. Attempt to access router via IP address through web browser. eg. 192.168.0.1 Attempt fails. No "connection" despite reported connection by system tray. Wireless card is disabled and enabled. No effect. Same icon with triangle. No internet. Connected to network. No access to router. - Connect ethernet cable stray reports internet access. connected to network. NO INTERNET via Firefox or IE. Access to router. Wireless card is disabled. No effect. System reports internet connection. No internet. Connected to network. access to router. Wireless card is enabled. No effect. System reports internet connection. No internet. Connected to network. access to router. Access router and reapply WIFI settings which restarts the wifi No effect. System reports internet connection. No internet. Connected to network. access to router. Neither ethernet nor wifi works though both report internet connections. Router reports internet connection as well. Disconnect ethernet cable. Internet works until next period of idle. Restarting the computer during internet problem doesn't help.This problem has been reproduced a total of 4 times in the exact same manner. --------------- Just to add, I have a USB dlink dwl-g132 wifi adapter and is has NEVER been able to access the internet. I presumed my wireless card was bad and attempted to use a USB adapter but the adapter has never been able to connect. Previously was using Win XP Pro. All devices were working without problems. Router never had to be restarted. ------------- Oh yea i looked at vista and basically said no. Windows 7 got a good review from a few people so i'm giving the RC at try. It runs a bit slow but I wouldn't mind a copy when the actual program is released but if the wireless problems continue then I will avoid this new OS and simply remain with my stable version of XP.
Free Windows Admin Tool Kit Click here and download it now
September 7th, 2009 2:49pm

Because of the number of similar issues reported on this forum, it is becoming clear the root-cause is lack of compatible drivers. Windraver comprehensive report indicates the NIC has entered a non-responsive state under Win 7, and this seems quite typical. Because I dual-boot with Vista, I can discount hardware problems or configuration issues with the router. I run the identical driver release on Win 7, although I have tried other versions. Another observation is changes to NIC settings often show an initial improvement, but then it'll revert back to the same level of failure. For example, disabling DHCP and applying static IP settings had my PC stable for more than 6 hours, but this did not last. There is also an association between the type of traffic. Streaming video or large file transfers will cause immediate failure. I've reported the issue several times now and have yet to receive a response from either MS or the NIC manufacturer, Linksys. I am running RC at present, but there's no way I'll buy the RTM when available due to this issue. For information, the NIC in question is Linksys WMP300N, version 1, running mixed mode and the 40Mhz channel for 'n'. Under Vista Business SP2 I enjoy a flawless connection with the same settings.
September 9th, 2009 1:47am

I took the advice of disabling the homegroups function. I proceeded to set all my settings to open for public and private networks. So far this has prevented my bug from reoccurring. This means there might be a problem with the homegroups functionality but thats just a theory.
Free Windows Admin Tool Kit Click here and download it now
September 9th, 2009 4:16pm

I can't give anyone the solution to all the problems noted here with wireless in Windows 7 on laptops, but I can state that I have 3 laptop with various wireless internal cards and they all have functioned properly with Win 7 public beta, Win 7 RC, and now with Win 7 RTM. So it's not something that is inherently wrong with Win 7. My laptops are a Dell Inspiron E1705 with an Intel 5300, a Dell Inspiron with a Ralink card, and an Asus Eee PC with AzureWare NE770. They all connect in 802.11n and the connect speeds vary from 170MHz to 300Mhz. I have never experienced any dropped connections or any other problems.Just my 2 cents.
September 17th, 2009 6:51pm

It appears broadcom devices are being affected. My problem is amusing actually. Wifi functionality is now erratic. Wifi absolutely will not work in combination with Ethernet connection. in any case, i had an internet emergency and ended up running to a different computer because windows 7 just isn't reliable enough when it comes to networking. maybe its my luck with the hardware support.
Free Windows Admin Tool Kit Click here and download it now
September 22nd, 2009 10:17am

I have same problem with Intel driver.Interface name: Wireless Network Connection Driver : Intel(R) PRO/Wireless 3945ABG Network Connection Vendor : Intel Corporation Provider : Microsoft Date : 26.03.2009 Version : 12.4.1.4 INF file : C:\Windows\INF\netw5v32.inf Files : 1 total C:\Windows\system32\DRIVERS\netw5v32.sys Type : Native Wi-Fi Driver Radio types supported : 802.11a 802.11b 802.11g FIPS 140-2 mode supported : Yes Hosted network supported : No
September 26th, 2009 12:18am

I had this kind of problem on my Dell Latitude d630 laptop with Intel Wireless 4964AGN card under Windows 7 RC2 64 bit. Internet connection wouldn't resume after wakeup. Then I resolved the issue. Here's what I did. I'musing a wireless router Netgear WGR614 v.6, which was set up to assign a particular IP address for each computer in my home network (I allowedonly fewIP addresses 'cause I didn't want 'guests' in my network). When I cancelled this feature and reset the router, the problem disappeared. Computers get IP addresses automatically now, and Windows doesn't lose the connection any more. Of course, it means there's acompatibility issue between Netgear and Windows 7, but at least my computer works now.
Free Windows Admin Tool Kit Click here and download it now
September 26th, 2009 12:54am

I had this problem too, a toggling your wireless should work though rather than a full restart. Not fix but a work around so you don't have to restart.
October 1st, 2009 6:10am

You guys need to wait until the hardware companies make proper drivers for you. Microsoft has always failed to get drivers prepaired for new OS's. Keep trying if you like.
Free Windows Admin Tool Kit Click here and download it now
October 1st, 2009 10:26pm

So its not a problem with 7 you say? Sure it is. They make a new OS and expect people to just make drivers to match the changes rather then make an OS that is fully compatible with all the past hardware. Its an endless story with MS.
October 1st, 2009 10:29pm

You guys need to wait until the hardware companies make proper drivers for you. Microsoft has always failed to get drivers prepaired for new OS's. Keep trying if you like. Microsoft does not dictate anything about drivers to the hardware companies. The hardware companies decide when they want to publish any new drivers needed for a new OS.So, Microsoft has NOT FAILED! The hardware companies have FAILED!
Free Windows Admin Tool Kit Click here and download it now
October 7th, 2009 10:29pm

So its not a problem with 7 you say? Sure it is. They make a new OS and expect people to just make drivers to match the changes rather then make an OS that is fully compatible with all the past hardware. Its an endless story with MS. It's an endless story with ALL Operating Systems. Changes are made to the kernel that render some hardware, and some software, incompatible with the new kernel and companies affected have to update their drivers/software to be compatible.If an automobile was built to run on rosebud oil but the company making rosebud oil didn't produce it in time, or in adequate quantities, it not the automobile manufacturer's fault - it's the rosebud oil comapnies fault!
October 7th, 2009 10:35pm

Well It definetly is driver issues. I just recieved an express card gig ethernet card, I needed it for my gig network. Well guess what, it works perfectly. The Realtek built in ethernet didnt work right nor did the mini PCIE Intel 3945 abg WIFI card, they both gave me the high pings. But the Belkin express card gig ethernet with the Marvel chip worked fine with the built in driver in 7. IT detected it flawlessly. Well I hope that settles it, its the drivers and incompatabilties. These issues should have been addressed already by Microsoft though....no excuse especially with the Intel wifi card.This is my last post guys...peace
Free Windows Admin Tool Kit Click here and download it now
October 7th, 2009 10:58pm

You guys need to wait until the hardware companies make proper drivers for you. Microsoft has always failed to get drivers prepaired for new OS's. Keep trying if you like. Microsoft does not dictate anything about drivers to the hardware companies. The hardware companies decide when they want to publish any new drivers needed for a new OS.So, Microsoft has NOT FAILED! The hardware companies have FAILED! Mr Dee I beg to differ. Microsoft needs to make an operating system that is compatible with as much of the past software as possible especially recent products and especially with INTEL. The hardware companies have not failed, they cant make drivers for an OS that hasnt been completed its a waste of money and resources. Most will wait just like INTEL has done!! There are no drivers for 7 for my 3945 wifi card. Since the OS is not out yet we cant complain but it is very close, the 22nd of this month. YES they have failed on this at least. But as you say its common for Microsoft though they have made leaps and bounds and the performance and additions to this OS are fantastic. I saw the changes first hand at the break out event in Ft LAuderdale. I know the differneces. Well thats it I'm out and tired of this topic. Good luck all
October 7th, 2009 11:14pm

You guys need to wait until the hardware companies make proper drivers for you. Microsoft has always failed to get drivers prepaired for new OS's. Keep trying if you like. Microsoft does not dictate anything about drivers to the hardware companies. The hardware companies decide when they want to publish any new drivers needed for a new OS.So, Microsoft has NOT FAILED! The hardware companies have FAILED! Mr Dee I beg to differ. Microsoft needs to make an operating system that is compatible with as much of the past software as possible especially recent products and especially with INTEL. The hardware companies have not failed, they cant make drivers for an OS that hasnt been completed its a waste of money and resources. Most will wait just like INTEL has done!! There are no drivers for 7 for my 3945 wifi card. Since the OS is not out yet we cant complain but it is very close, the 22nd of this month. YES they have failed on this at least. But as you say its common for Microsoft though they have made leaps and bounds and the performance and additions to this OS are fantastic. I saw the changes first hand at the break out event in Ft LAuderdale. I know the differneces. Well thats it I'm out and tired of this topic. Good luck all You apparently have no concept of software development, and especially operating system development. No one developing an operating system designs it with concept of making it compatible with older technology. Apple doesn't. Linux doesn't And on and on. The software companies and hardware companies have to update their software to be fully functional on the new platform.Wake up and join reality!
Free Windows Admin Tool Kit Click here and download it now
October 8th, 2009 6:53pm

You guys need to wait until the hardware companies make proper drivers for you. Microsoft has always failed to get drivers prepaired for new OS's. Keep trying if you like. Microsoft does not dictate anything about drivers to the hardware companies. The hardware companies decide when they want to publish any new drivers needed for a new OS.So, Microsoft has NOT FAILED! The hardware companies have FAILED! Mr Dee I beg to differ. Microsoft needs to make an operating system that is compatible with as much of the past software as possible especially recent products and especially with INTEL. The hardware companies have not failed, they cant make drivers for an OS that hasnt been completed its a waste of money and resources. Most will wait just like INTEL has done!! There are no drivers for 7 for my 3945 wifi card. Since the OS is not out yet we cant complain but it is very close, the 22nd of this month. YES they have failed on this at least. But as you say its common for Microsoft though they have made leaps and bounds and the performance and additions to this OS are fantastic. I saw the changes first hand at the break out event in Ft LAuderdale. I know the differneces. Well thats it I'm out and tired of this topic. Good luck all You apparently have no concept of software development, and especially operating system development. No one developing an operating system designs it with concept of making it compatible with older technology. Apple doesn't. Linux doesn't And on and on. The software companies and hardware companies have to update their software to be fully functional on the new platform.Wake up and join reality! So its good business to make an OS that doesnt work on anyones hardware? You dont understand what I'm saying. Windows 7 uses fixes to make it compatible with old software. These fixes include drivers and other programs that are produced by the software and hardware companies in a business relation with Microsoft. If microsoft doesnt request the fix and add it to the data base the software or hardware will not work. Do you understand? Its up to MICROSOFT to make it happen!!! But only before release. Its a colboration of both companies but MS has the most interest right? After the release of the OS then its the suppliers responsiblity only for all new hardware or software to be made compatible. I never said MS only has to develop the fixes but they do have to make it as compatible as possible by forming the fix database. I agree "The software companies and hardware companies have to update their software to be fully functional on the new platform." but it must be done in colaboration with MS to produce a functional OS. But as always it never can happen though MS has done alot better with so many compatible drivers built into the new OS. Apple, Linux are a totally differnet issue, dont compair with them.
October 8th, 2009 7:59pm

So its good business to make an OS that doesnt work on anyones hardware? You dont understand what I'm saying. Windows 7 uses fixes to make it compatible with old software. These fixes include drivers and other programs that are produced by the software and hardware companies in a business relation with Microsoft. If microsoft doesnt request the fix and add it to the data base the software or hardware will not work. Do you understand? Its up to MICROSOFT to make it happen!!! But only before release. Its a colboration of both companies but MS has the most interest right? After the release of the OS then its the suppliers responsiblity only for all new hardware or software to be made compatible. I never said MS only has to develop the fixes but they do have to make it as compatible as possible by forming the fix database. I agree "The software companies and hardware companies have to update their software to be fully functional on the new platform." but it must be done in colaboration with MS to produce a functional OS. But as always it never can happen though MS has done alot better with so many compatible drivers built into the new OS. Apple, Linux are a totally differnet issue, dont compair with them. Microsoft DOES NOT request ANY company to supply fixes to any third party software or drivers! Period! I have been dealing with new versions of Windows for well over 15 years now and I know this to be a fact.An example with Win 7: I use Vipre antimalware. Vipre worked with the Public Beta. When RC was released there was a problem with Vipre reporting its status to Win 7 - Microsoft did not request an update; Sunbelt Software initated the necessary action on their own. When RTM was released there was an issue with Vipre starting Active Protection - again Microsoft did not request an update; Sunbelt initated the corrective active themself. I can give more examples if you wish.It is ENTIRELY up to the hardware and software companies to decide if they wish to support a new operating system and there are some that just decide to not do it. Another example is Windows XP x64. Initially Intel opted to not get involved at all so the first few edition of Win XP x64 Beta were for AMD64 CPUs ONLY - you could not install it on any Intel CPU. Microsoft did not care whether Intel support XP x64 or not.And, yes, Microsoft has done very well at including drivers in the installation package, but those drivers were voluntarily supplied - there was no request from Microsoft or pressure on the companies.It is exactly the same with all operating systems. Software and drivers are entirely voluntary on the part of the respective companies! Microsoft can engineer a new operating system, but Microsoft cannot force any company to support it. Like the old saying: you can lead a horse to water, but you cannot force him to drink the water!
Free Windows Admin Tool Kit Click here and download it now
October 9th, 2009 12:20am

hahaha, i think we've all dealt with new versions of windows over 15 years now. windows 3.1 was fun. If you look around, backwards compatibility is favorable. Game companies can do it. Microsoft has attempted to do it as well but with the wealth of hardware out there it is clear that not everything can be compatible. Now imagine if they made something that would convert an old XP driver to work on windows 7? wouldn't that be nice? Vista sucked because of bugs and driver issues. Microsoft should know clear and well what they did with windows XP and Vista. If they can create an OS that supports older drivers then its great! hardware companies would love microsoft because the cost to fix all their drivers is enormous. Some of their hardwares don't even receive support anymore so they wouldn't even bother. I'm sure many of us recall the compatibility module in Windows XP where it would try to support 98, 95 versions. Its not something microsoft HAS to do but it is definitely something Microsoft CAN do if they want people to embrace their new OS. I'm not going to use windows 7 anymore simply because its not compatible with my laptop. I eventually found it too irritating to use a cool operating system that didn't let me use ethernet or wifi. Drivers were installed by microsoft's update. So I guess its farewell. back to XP, why upgrade if its gonna break your computer :p
October 17th, 2009 12:13am

I am having the same problem. Has anyone found a solution to this problem? It only seems to be getting worse for me. I could not get on the internet at all last night! It seems like this would be a problem that microsoft would want to fix as soon as possible, considering that windows 7 is supposedly their best OS to date. I am not too happy with it! Just to let everyone know: I am using an Airlink101 wireless adapter model#AWLH3028, and a Linksys wireless G broadband router model# WRT54G2.
Free Windows Admin Tool Kit Click here and download it now
October 26th, 2009 9:54pm

I installed the final build of win7 and it seems to have fixed the problem so far. I'm thinking they simply fixed the problem in the final build rather than put out a patch or something for the rc build.
October 26th, 2009 10:44pm

Are you still problem free?
Free Windows Admin Tool Kit Click here and download it now
October 28th, 2009 4:40am

I hope this helps... 1. click "start" 2. click "control panel" 3. click "network & internet" 4. click "network sharing center" 5. click "advanced sharing settings" 6. click the "^" associated to "home or work" 7. scroll to the bottom you will see "homegroup connections" 8. click "use user accounts and passwords to connect to other programs" I hope this is the one. I used it and updated my windows and the problem seems to have disappeared... Thanks so much for the step by step help, but "when i close the lid and it goes to sleep, i will come back and open it up and it shows limited connection ". This problem is not fixed :( Geely, have you found a fix for the problem?
October 28th, 2009 4:41am

After I upgraded my OS from Window Vista to Windows 7 Home premium. I am not able to connect to the internet.Whenever I log on my modem (2wire2701 HGV-E), they will signal that there are no network connection. A further message is ""Wireless Network connection" doesn't have a valid IP configuration"I have updated my driver for my adapter to the latest version. Still cannot helpAs I am computer newbie, apprciate a clear reply. CAn anyone help??
Free Windows Admin Tool Kit Click here and download it now
October 30th, 2009 6:20pm

After I upgraded my OS from Window Vista to Windows 7 Home premium. I am not able to connect to the internet.Whenever I log on my modem (2wire2701 HGV-E), they will signal that there are no network connection. A further message is ""Wireless Network connection" doesn't have a valid IP configuration"I have updated my driver for my adapter to the latest version. Still cannot helpAs I am computer newbie, apprciate a clear reply. CAn anyone help?? Why don't you start a new thread. The original post was about Win 7 RC. If you now have Win 7 Home Premium, which is RTM, then your post here is really not relavent and actually would tend to get lost in all the menutia.
October 30th, 2009 10:12pm

Have started a new thread:) Just wondering why are they selling such a ____ product that cannot even connect to the internet easily....thot this is the basic for any pc nowaday.....
Free Windows Admin Tool Kit Click here and download it now
October 31st, 2009 6:51am

Why dont you just change the wifi card with another? I know you shouldnt have to. There like 10-20 dollars on ebay. Sounds like yours is not compatible yet until new drivers come out.
October 31st, 2009 3:55pm

Hi guys, is this issue still being a problem for everyone? I've figured out a simplest way to fix it permanently.
Free Windows Admin Tool Kit Click here and download it now
November 27th, 2009 6:30am

Hi Allen, from what I read and the issues I have had with ping spikes and disconnects it would be nice if you could share the fix with all of us. You would be a God to this community if you could do this. I have 7 Ultima and dont even use it anymore. I'm just using XP and use Vista on occation.
November 27th, 2009 7:45am

No problems I'd like to:) I'm using the corporation wifi network so the settings might be a little bit different from those home users, but you should get the idea and change it to your own settings. -you need to manually create a network profile first. Go to Control Panel -> Network and Sharing Center -> choose Manage wireless networks on the left panel. -Add a network from there, Network Name: The same name as the one in your router Security Type: WPA2-Enterprise (You might use WEP or WPA2-Personal, depends on your router settings) -Go to next page and then click on 'Change Connection Settings' -Go to Security tab at the top and configure all settings correspond to your router. *****Here is the trick****** -Under Security tab, you will see there is an option 'Advanced Settings', get in there. -Under tab '802.1x settings', tick the box 'Specify authentication mode' -I choose 'User authentication' in the drop-down box, and then click on 'Save credentials' -I type in my corp Username and Password, and then go OK -Close all the windows and try your wifi connection agian Hope this will work for all of you, at least if fixed my problems and worked excellent so far.
Free Windows Admin Tool Kit Click here and download it now
November 27th, 2009 8:12am

Not much activity in this thread lately, but I'm sure the problem persists. I have longstanding reconnect issues with my Vaio FE series laptop in both Vista and Windows 7. I'm using a Vista system with a shared internet connection for DHCP and a Buffalo router as an access point. After wakeup from sleep or hibernation, the Vaio will do one of two things: Wait about 45 seconds before reconnecting Reconnect and then immediately disconnect and wait 45 seconds before connecting An older Dell laptop running XP connects straight away and stays connected. I don't know if the difference is hardware or software. I see no difference between Vista and Windows 7 in terms of connection time. The only thing I've been able to do to accelerate the reconnect is to switch from WPA security to WEP. That seems to reduce the connect time to 5-10 seconds, which is acceptable, although I still get the strange behavior of reconnecting immediately, disconnecting, and then reconnecting. I tried Allen's solution but I see no router when I try to set up a new network. However all of the things he talks about are available to me from the Network and Sharing Center by clicking "Manage Wireless Networks" on the blue panel on the left side of the window, and then right clicking the network connection and selecting "Properties." He may be onto something with authentication, though. WEP only appears as an option when I select "No authentication."
December 19th, 2009 4:03pm

I am suffering from the exact same problem on HP desktop. I was wondering if you have found any solution. I appreciate letting me knoq
Free Windows Admin Tool Kit Click here and download it now
December 31st, 2009 7:27am

@ebiG - I have an HP laptop and have had the same wifi problem since I got the thing. As with most others, I didn't have the problem after a fresh install until all the drivers were installed, then madness ensued. This problem has more to do with HP and Broadcom sw than it does windows. If I boot into safemode with networking support, I do not have an issue. Currently, I believe I have resolved this problem by uninstalling the HP wireless utility from the control panel(Not sure of exact name, but it's not the wireless assitant. Look for the utility made by broadcom and uninstall and reboot. Hope this helps...now to figure out why my KB stops working when I get out of table mode.\ Thanks for the posts in this thread!
January 5th, 2010 7:05pm

I also tried everything and This finally worked for me... I have a new laptop with windows 7, and when i first tried the wifi it worked great! but after being online a while my connection just dropped and i was getting an error saying "no internet access or " limited acess" so after trying everything i read on a bunch of forums and days of trying i completely ran out of ideas. I reset my ip , rebooted, did a system restore ( which worked, but when only once) I disabled tcp/ipv6 in my network adapter settings, i disabled home group. and nothing worked. but then i thought could this be a problem with windows update? anyway i was about to research every installed update windows installed when i decided to try, rolling back my network adapter inside device manager! Which i did afterwards i rebooted my laptop, when i restarted my computer it worked! i was connected to the network! Just incase you don't know how...here is how i rolled back my network adapter driver within windows 7 go to start, and in the search box type in device manager , click the lil arrow next to network adapters, right click "properties" once that pops up , click the "drivers" tab and select roll back driver. i rebooted and the next time i started my computer i had my internet back! you might have to connect to your network. but i had already setup to auto connect so i didnt have to. and then what i also did was disable windows update because i want to manually choose when and what is updated on my computer. this way that driver update cant be installed by windows update again . I really hope this helps .
Free Windows Admin Tool Kit Click here and download it now
January 8th, 2010 9:02am

Try updating your BIOS firmware. Sadly windows does not do this for you, you have to get it from the manufacturers support website.
January 21st, 2010 7:28am

Hi! All, I don't think it's BIOS related. Tried it doesn't help at all. Try disabling or uninstalling your Anti-virus softwares. It worked for me. In my case, was using the Win7 (64-bit) RC1, my wireless adapters didn't face any issues, even with XP or Vista based drivers installed. That changed when I purchased & installed Win7 Ultimate 64-Bit Build 7600, my wireless adapter wouldn't function at all, even though the device manufacturer had win7_64-Bit drivers available. The adapter just wouldn't enable. To my surprise when I install it on any machine running WinXP or Vista, it's working without any problems. It also worked on Build 7100 with the latest win7 drivers without a hitch. FYI, it also work without any problems on Win7 Ultimate XP-Mode. Then I search the internet for answers, and found a couple. The one that help was uninstalling my Kaspersky Internet Security 2010 (9.0.0.736), and it worked. A faster way, if you don't want to uninstall your anti-virus program, you can do this: 1. Right click on the Internet Connection icon, on the lower right corner. 2. Click "Open Network and Sharing Center". 3. Right click on Wireless Network Connection, and click Properties. 4. Unmark/uncheck your anti-virus filter. For my case "Kaspersky Anti-Virus NDIS 6 filter". 5. Click OK to accept. 6. Notice that the wireless connection is enabled. Right click to disable it, then right click to re-enable. 7. Right click the wireless device, and click Connect / Disconnect. 8. You should be able to view all available wireless connection. Hope it helps.
Free Windows Admin Tool Kit Click here and download it now
February 4th, 2010 10:58am

After upgrading to Windows7PRO 64-bit from the Vista Business 64-bit, I had the same problem with the wifi connectivity. After removing the device driver and reinstalling it (intel 5300 proset) the problem continues... Finally, the problem was solved after removing intel matrix manager which was just previously installed... I had created a restore point from this point... Now, I am not having problems connecting to wifi but instead am having problems (about 2 weeks later) with the speed of the internet connection. I have heard that the upgrade to Windows7 may have issues vs. just installing the operating system. Any thoughts?
February 15th, 2010 10:28am

I did a clean install of the full version OEM Windows 7 profesional 32 bit version build 7600 and I am having the same issue with slow file download transfers. I am using a WiFi card. I am connected to a 36Mbps connection and my download speed is average 50Kbps to 130Kbps after installing Windows 7. When Normally it is 270Kbps to 400Kbps on Vista. It is 270Kbps to 400Kbps on my XP Pro computer as well. Now that I have Windows 7 on this computer and not Vista on it I am only able to get the 50Kbps to 130Kbps instead of my normal download speed. Microsoft really needs to resolve this issue. Plus when I press Esc + Ctrl + Shift and select Networking. I checked under Wireless Network. Under network utilization is averaging about 2. to 4 percent. With a Link speed of 36Mbps. Shouldn't Network Utilization be a lot higher then that when connected to a high speed internet connection as well?
Free Windows Admin Tool Kit Click here and download it now
March 10th, 2010 7:04pm

Funny, that you mention of this issue. I don't have this issue in Win 7 Ultimate 64 bit build 7600. But i do get it when running XP Mode. So far i haven't a clue why it happens. Still looking for answers.
March 26th, 2010 1:02pm

step 1 restart ur modem/router. step 2 set the IPV4 prpoerty Step 3 assign the ip's and save the setting
Free Windows Admin Tool Kit Click here and download it now
May 11th, 2010 1:35pm

*****Here is the trick****** -Under Security tab, you will see there is an option 'Advanced Settings', get in there. -Under tab '802.1x settings', tick the box 'Specify authentication mode' -I choose 'User authentication' in the drop-down box, and then click on 'Save credentials' -I type in my corp Username and Password, and then go OK -Close all the windows and try your wifi connection agian Hope this will work for all of you, at least if fixed my problems and worked excellent so far. 'Specify authentication mode' that box does not exist, and I followed your guide exactly, it only has a check box for "federal imformation processing..." And every other suggestion does not work. My network continues to drop from 300mbps down to 13.5mbps then says "no internet connection" I can't even use my wifi printer when this happens. This ONLY happens on my windows 7 PC. My adapter works fine on any XP/Vista PC. ~SpartanAMD Phenom II 940BE, ATI Radeon 4890, Gigabyte 790GX, 8GB OCZ Reaper DDR2, X-fi XGamer, OCZ GameXstream 850w. Windows 7.
May 11th, 2010 2:14pm

I agree with spartan. my 5 yr old hp laptop running xp home keeps my connection fine, but this new windows 7 hp keeps dropping the connection! also there is no box except the federal info processing (no specify authentication mode) where indicated. i'm using a linksys wrt54gs router. i have 3 other computers and NONE of them drop connections like this windows 7 one! has anyone figured this out yet? thanks so much!
Free Windows Admin Tool Kit Click here and download it now
August 13th, 2010 6:41pm

I believe I have found a solution. Go to your router page in internet explorer/firefox or whichever browser you use, navigate to wireless settings (different for every router) look to see if you can select wireless "G" and set it to 802.11g. Save. Go to security then set authentication to WPA (or WPA2) AES. You can keep your security key the same. Save settings. Connect to your network as usual, just making sure that you set your adapter to WPA (or WPA2) AES. then continue as normal and you should have a stable connection, although your will be limited to 54mbps. Also, your will be able to uses network devices i.e. wifi printer and there will be no "cannot connect to printer" or similar messages. ~SpartanAMD Phenom II 940BE, ATI Radeon 4890, Gigabyte 790GX, 8GB OCZ Reaper DDR2, X-fi XGamer, OCZ GameXstream 850w. Windows 7.
August 13th, 2010 8:22pm

I am having a similar problem with wifi stopping when the load is high. I have - dell Latitude XT - windows 7 pro 64bit - broadcom Wifi b/g/n capable - my home wifi router is configured open, (it's a philips b/g/n capable) The connection stops after some minutes that the bandwith used is high (I can do 8mbit connections ... i.e. 800Kbyte/s download rate). I have found a temporary solution - put it in sleep mode (e.g. by closing the lid) - reopen the lid This reinitializes the broadcom wifi drivers (without rebooting!!) and the network goes up again. BTW, a similar problem happens if I am using wired gigabit connection and the download rate is over 2Mbytes/s This suggests me a memory handling problem or a interrupt handler problem at the network stack level ....
Free Windows Admin Tool Kit Click here and download it now
August 15th, 2010 3:08pm

My daughter's Acer netbook running Windows 7 was also dropping the internet connection. I noticed everytime it would do a Windows update that was when it would lose connection. Everytime I would do a system restore the internet works again. There has to be a bug in the update. I have turned off ALL Windows updates and so far have not had another problem.
September 8th, 2010 6:15pm

The specifics of the issue that I have been having is similar too others in this thread: - LAN Connections OK - Private WiFi Connections OK - Public WiFi Connections drop for no reason and you can be left with zilch connectivity. This is crucial for me and I suspect many others that use Coffee shops to work in!!! Mine's a Toshiba Satellite Pro with a Realtek card - updated WLAN drivers - zippo Updated Windows 7 - zippo But I wondered why specfically public networks??? So (as a work round - problem not really 'fixed') - but at least a workable solution - changed the Home/Work profile so that all sharing and visibility is turned OFF. It works well, but of course one will need to switch sharing back on when you get back to the office. So - it looks like it's a problem somewhere between the Firewall, the Network Profile and the WLAN drivers (doesn't really narrow it down hugely!!!). BIG REQUEST - Microsoft -->> Please fix this and put out an update, 'cos its the only really dross bit of Windows 7 we've come across thus far....
Free Windows Admin Tool Kit Click here and download it now
October 3rd, 2010 11:21am

Hi Mike Did u got a solution for this other that upgrading to Windows 7 Beta ? I faced the same problem with my CISCO-871w router. After a long time trouble shoot I find out(actually we-TAC Dialog) problem was with Windows system. Also found a solution too.. solution is type below two commans in command promt. 1. ipconfig /release 2. ipconfig /renew That will allow Windows 7 to release the ip address that assigned to their radio interface and request new one causing assigning a ip address again most probably the prevoius one. Then it will sort out all the issues. Please give me a feed back.
November 14th, 2010 11:40pm

Hi Rick I work in TAC that trouble shoot network related problems as my day to day works. Then I noticed common issue of WiFi with Windows7. ISSUE IS :-- when working(internet) laptop by using wifi with Windows7 is restareted then unable to connect to wireless network but previous assinged ip details is there. But unable to ping to default gateway(suppose it is router). Nothing work like disabling and enabling wireless path etc... to fix the issue. Have you come a cross exactly this kind of issue ? if so please reply... Also we found some solutions that cause our customer(Wifi internet) to connect to wireless network again as below enter below two commands on the command prompt. 1. ipconfig /release 2. ipconfig /renew Please give me a feed back....
Free Windows Admin Tool Kit Click here and download it now
November 15th, 2010 12:16am

I have a similar poroblem on my new Asus CM5675-09 desktop machine. The board uses an Intel chipset, with a "realtek" ethernet built-in connection. Win 7 Home Premium pre-installed. Every boot cycle, I have to repair the network connection. I have performed all the updates available from MS update, BIOS had been flashed to v. 0502, latest available from Asus. I have even wiped the hard disk & reloaded Win 7. (Running the 64-bit version of Win7 HomePremium) Looks like we have a newer release of early Vista, folks...
November 29th, 2010 8:38am

I had a similar problem, WIFI on the local network worked 100%, but the WIFI bar indicated that internet was not available. Other computers connected fine to the net. My problem was solved by disabling the Microsoft Loopback network adapter.
Free Windows Admin Tool Kit Click here and download it now
January 6th, 2011 5:25pm

I hope this helps... 1. click "start" 2. click "control panel" 3. click "network & internet" 4. click "network sharing center" 5. click "advanced sharing settings" 6. click the "^" associated to "home or work" 7. scroll to the bottom you will see "homegroup connections" 8. click "use user accounts and passwords to connect to other programs" I hope this is the one. I used it and updated my windows and the problem seems to have disappeared... Thanks so much for the step by step help, but "when i close the lid and it goes to sleep, i will come back and open it up and it shows limited connection ". This problem is not fixed :( This worked for me today. Yet to see if it causes any other problems. If it does, I hope I can find my way back to change the setting back.
January 18th, 2011 6:22pm

Things one could try when encountering WIFI problems Open up a (elavated)command prompt and use the following commands. netsh winsock reset catalog netsh int ip reset reset.log http://burrowowl.net/wordpress/200606/netsh_winsock_reset_catalog/
Free Windows Admin Tool Kit Click here and download it now
January 26th, 2011 2:22pm

This topic is archived. No further replies will be accepted.

Other recent topics Other recent topics