Hello , Im trying to setup a VPN connection and got error 919 , and 629.. I have windows server 2008 R2 configured as VPN server and the client is on Win 7 Ult PC. - The server is connected to the internet via Wireless LAN only.. I have a netgear wireless modem/router... - I enabled RRAS on the server and created a user and on the AD I Allow Access in the dial in Tab. - I created a new VPN connection on the client PC (WIN 7 ) and in the address I put the IP of the server and then the user name and password .then when I connect I got the error 919 and tried again with error 629. - I can ping the server and the server can ping the client. Im trying on internal network. - I enabled the REQUEST TO PING ON WAN in the netgear - The firewall is OFF on both server and client , but still cant connect.....!! Thanks in Advace for help and if any specific info needed please let me know. Regards

Please see the following blog. Troubleshooting Vista VPN problems - Routing and Remote Access Blog - Site Home - TechNet Blogs For error 919, the suggestion is: Configure your server to allow clients to connect with MS-CHAPv2 as the authentication method. Update your VPN client connection settings to use MSCHAPv2 as the authentication method. If you have a third-party VPN server which does not support MS-CHAPv2 as an authentication method and supports only MS-CHAPv1, you will need to use either CHAP or PAP to connect from the Windows Vista VPN client until the server you use starts supporting MS-CHAPv2.Please remember to click Mark as Answer on the post that helps you, and to click Unmark as Answer if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

hello , Thanks for your reply , I've tried all the Vista VPN troubleshooting but the problem still the same. but this time I got error 812 and 619..Still couldnt connect. I've Installed Windows server 2008 Sp2 on another machine and tried the VPN and it Works Fine. I did the same configuration and NPS on the Windows server 2008 R2 machine but No Connection and still getting errors. Do you think the problem is with some other programs on the R2 Machine..and if I did re-install a clean Win Server 2008 R2 will it work Fine. Thanks