The Lync Server Front-End service terminated with service-specific error 3287447135 (0xC3F2765F).
Hi, would you please check below items to narrow down the issues?
1. Are errors and warnings showed up in Event logs?
2. Does the firewall block ports or software between Lync and Backend SQL server?
3. All settings are set correct in Topology builder? The Topology builder will show red-cross if it's not configured correctly.
4. It never works or stops working just now? Any changes had been made before its stop working?
5. Please try to reboot FE server. (Make sure DC and Backend database server are working well before rebooting FE server.)
1) yes
2) SQL express 2008
3) Yes all settings are coorect no red.
4) no never work fresh install.
5) I did reboot
Is that error from the system log? What do you see in your Lync log under Applications and Services -> Lync Server ?
WHen I try to start service it create error in System log.
and pop error message when try to start Lync Server Front-End
< Windows Could not start the Lync Server Front-End on ( Server Name ) . For more information, review the Event log. If this is non-Micrasoft service, contact the service vendor, and refer to service-specific error code - 1007520161. >
No I don't see any Lync log under Applications and Services
Okay, if you can, can you look at the Lync event log.
Under event viewer you should see:
Windows Logs
Applications and Services Logs
expand Applications and Services Logs
and select Lync Server
Usually these logs give more information specific to the Lync services that are failing
Log Name: Lync Server
Source: LS MCU Infrastructure
Date: 10/19/2010 10:10:48 AM
Event ID: 61043
Task Category: (1022)
Level: Error
Keywords: Classic
User: N/A
Computer: Server Name
Description:
This process was not able to update its health status
The IM Conferencing Server failed to send health notifications to the MCU factory at
https://Server Name.com:444/liveserver/mcufactory/.
Failure occurrences: 125, since 10/19/2010 9:39:35 AM.
Cause: Either the Front End service is not running, or poor network connectivity.
Resolution:
Verify that the Front End Service is available, and its machine is visible over the network.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="LS MCU Infrastructure" />
<EventID Qualifiers="50174">61043</EventID>
<Level>2</Level>
<Task>1022</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-10-19T14:10:48.000Z" />
<EventRecordID>1401</EventRecordID>
<Channel>Lync Server</Channel>
<Computer>Server Name</Computer>
<Security />
</System>
<EventData>
<Data>https://ServerName.com:444/liveserver/mcufactory/</Data>
<Data>125</Data>
<Data>10/19/2010 9:39:35 AM</Data>
</EventData>
</Event>
Log Name: Lync Server
Source: LS User Services
Date: 10/19/2010 10:25:44 AM
Event ID: 32111
Task Category: (1006)
Level: Information
Keywords: Classic
User: N/A
Computer: ComputerName.com
Description:
Registrar with FQDN: ComputerName.com has restarted.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="LS User Services" />
<EventID Qualifiers="17390">32111</EventID>
<Level>4</Level>
<Task>1006</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-10-19T14:25:44.000Z" />
<EventRecordID>1508</EventRecordID>
<Channel>Lync Server</Channel>
<Computer>ComputerName.com</Computer>
<Security />
</System>
<EventData>
<Data>ComputerName.com</Data>
</EventData>
</Event>
Log Name: Lync Server
Source: LS Applications Module
Date: 10/19/2010 10:25:44 AM
Event ID: 30236
Task Category: (1010)
Level: Error
Keywords: Classic
User: N/A
Computer: ComputerName.com
Description:
The UserServices module was not found in the Application List.
Application Uri: 'http://www.microsoft.com/LCS/UserServices'
Cause: The server configuration requires the UserServices module to be registered and active. However the configuration information is not found.
Resolution:
UserServices configuration is installed at setup time. Check the application list and ensure that it is present. If it is not present, reinstall the server. If this problem occurred after you installed a new application, contact the application vendor to rectify the problem.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="LS Applications Module" />
<EventID Qualifiers="50162">30236</EventID>
<Level>2</Level>
<Task>1010</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-10-19T14:25:44.000Z" />
<EventRecordID>1509</EventRecordID>
<Channel>Lync Server</Channel>
<Computer>ComputerName.com</Computer>
<Security />
</System>
<EventData>
<Data>http://www.microsoft.com/LCS/UserServices</Data>
</EventData>
</Event>
Log Name: Lync Server
Source: LS Applications Module
Date: 10/19/2010 10:25:44 AM
Event ID: 30211
Task Category: (1010)
Level: Error
Keywords: Classic
User: N/A
Computer: ComputerName.com
Description:
Failed to initialize the API subsystem.
Cause: Review earlier events to determine the specific reason APIEM failed to initialize.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="LS Applications Module" />
<EventID Qualifiers="50162">30211</EventID>
<Level>2</Level>
<Task>1010</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-10-19T14:25:44.000Z" />
<EventRecordID>1510</EventRecordID>
<Channel>Lync Server</Channel>
<Computer>ComputerName.com</Computer>
<Security />
</System>
<EventData>
</EventData>
</Event>
Log Name: Lync Server
Source: LS Server
Date: 10/19/2010 10:25:44 AM
Event ID: 12308
Task Category: (1000)
Level: Error
Keywords: Classic
User: N/A
Computer: ComputerName.com
Description:
A component could not be started. The service has to stop.
Component: Live Communications Applications Module Error code: C3F2765F!_HRX! (APIEM_E_ESBASE_MISSING!_HRM!)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="LS Server" />
<EventID Qualifiers="50152">12308</EventID>
<Level>2</Level>
<Task>1000</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-10-19T14:25:44.000Z" />
<EventRecordID>1511</EventRecordID>
<Channel>Lync Server</Channel>
<Computer>ComputerName.com</Computer>
<Security />
</System>
<EventData>
<Data>Live Communications Applications Module</Data>
<Data>C3F2765F</Data>
<Data>APIEM_E_ESBASE_MISSING</Data>
</EventData>
</Event>
Log Name: Lync Server
Source: LS User Services
Date: 10/19/2010 10:25:44 AM
Event ID: 32108
Task Category: (1006)
Level: Warning
Keywords: Classic
User: N/A
Computer: ComputerName.com
Description:
Pool Manager changed state of Registrar with FQDN: ComputerName.com to Inactive.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="LS User Services" />
<EventID Qualifiers="33774">32108</EventID>
<Level>3</Level>
<Task>1006</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-10-19T14:25:44.000Z" />
<EventRecordID>1512</EventRecordID>
<Channel>Lync Server</Channel>
<Computer>ComputerName.com</Computer>
<Security />
</System>
<EventData>
<Data>ComputerName.com</Data>
</EventData>
</Event>
Log Name: Lync Server
Source: LS Routing Data Sync Agent
Date: 10/19/2010 10:25:44 AM
Event ID: 48002
Task Category: (1058)
Level: Information
Keywords: Classic
User: N/A
Computer: ComputerName.com
Description:
The Routing Data Sync Agent is stopping.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="LS Routing Data Sync Agent" />
<EventID Qualifiers="17442">48002</EventID>
<Level>4</Level>
<Task>1058</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-10-19T14:25:44.000Z" />
<EventRecordID>1513</EventRecordID>
<Channel>Lync Server</Channel>
<Computer>ComputerName.com</Computer>
<Security />
</System>
<EventData>
</EventData>
</Event>
Log Name: Lync Server
Source: LS MCU Factory
Date: 10/19/2010 10:25:44 AM
Event ID: 51003
Task Category: (1021)
Level: Information
Keywords: Classic
User: N/A
Computer: ComputerName.com
Description:
Lync Server MCU Factory stopping.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="LS MCU Factory" />
<EventID Qualifiers="17405">51003</EventID>
<Level>4</Level>
<Task>1021</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-10-19T14:25:44.000Z" />
<EventRecordID>1514</EventRecordID>
<Channel>Lync Server</Channel>
<Computer>ComputerName.com</Computer>
<Security />
</System>
<EventData>
</EventData>
</Event>
- Edited by NR001 Tuesday, October 19, 2010 2:30 PM
Log Name: Lync Server
Source: LS MCU Infrastructure
Date: 10/19/2010 10:10:48 AM
Event ID: 61043
Task Category: (1022)
Level: Error
Keywords: Classic
User: N/A
Computer: Server Name
Description:
This process was not able to update its health status
The IM Conferencing Server failed to send health notifications to the MCU factory at
https://Server Name.com:444/liveserver/mcufactory/.
Failure occurrences: 125, since 10/19/2010 9:39:35 AM.
Cause: Either the Front End service is not running, or poor network connectivity.
Resolution:
Verify that the Front End Service is available, and its machine is visible over the network.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="LS MCU Infrastructure" />
<EventID Qualifiers="50174">61043</EventID>
<Level>2</Level>
<Task>1022</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-10-19T14:10:48.000Z" />
<EventRecordID>1401</EventRecordID>
<Channel>Lync Server</Channel>
<Computer>Server Name</Computer>
<Security />
</System>
<EventData>
<Data>https://ServerName.com:444/liveserver/mcufactory/</Data>
<Data>125</Data>
<Data>10/19/2010 9:39:35 AM</Data>
</EventData>
</Event>
Log Name: Lync Server
Source: LS User Services
Date: 10/19/2010 10:25:44 AM
Event ID: 32111
Task Category: (1006)
Level: Information
Keywords: Classic
User: N/A
Computer: ComputerName.com
Description:
Registrar with FQDN: ComputerName.com has restarted.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="LS User Services" />
<EventID Qualifiers="17390">32111</EventID>
<Level>4</Level>
<Task>1006</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-10-19T14:25:44.000Z" />
<EventRecordID>1508</EventRecordID>
<Channel>Lync Server</Channel>
<Computer>ComputerName.com</Computer>
<Security />
</System>
<EventData>
<Data>ComputerName.com</Data>
</EventData>
</Event>
Log Name: Lync Server
Source: LS Applications Module
Date: 10/19/2010 10:25:44 AM
Event ID: 30236
Task Category: (1010)
Level: Error
Keywords: Classic
User: N/A
Computer: ComputerName.com
Description:
The UserServices module was not found in the Application List.
Application Uri: 'http://www.microsoft.com/LCS/UserServices'
Cause: The server configuration requires the UserServices module to be registered and active. However the configuration information is not found.
Resolution:
UserServices configuration is installed at setup time. Check the application list and ensure that it is present. If it is not present, reinstall the server. If this problem occurred after you installed a new application, contact the application vendor to rectify the problem.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="LS Applications Module" />
<EventID Qualifiers="50162">30236</EventID>
<Level>2</Level>
<Task>1010</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-10-19T14:25:44.000Z" />
<EventRecordID>1509</EventRecordID>
<Channel>Lync Server</Channel>
<Computer>ComputerName.com</Computer>
<Security />
</System>
<EventData>
<Data>http://www.microsoft.com/LCS/UserServices</Data>
</EventData>
</Event>
Log Name: Lync Server
Source: LS Applications Module
Date: 10/19/2010 10:25:44 AM
Event ID: 30211
Task Category: (1010)
Level: Error
Keywords: Classic
User: N/A
Computer: ComputerName.com
Description:
Failed to initialize the API subsystem.
Cause: Review earlier events to determine the specific reason APIEM failed to initialize.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="LS Applications Module" />
<EventID Qualifiers="50162">30211</EventID>
<Level>2</Level>
<Task>1010</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-10-19T14:25:44.000Z" />
<EventRecordID>1510</EventRecordID>
<Channel>Lync Server</Channel>
<Computer>ComputerName.com</Computer>
<Security />
</System>
<EventData>
</EventData>
</Event>
Log Name: Lync Server
Source: LS Server
Date: 10/19/2010 10:25:44 AM
Event ID: 12308
Task Category: (1000)
Level: Error
Keywords: Classic
User: N/A
Computer: ComputerName.com
Description:
A component could not be started. The service has to stop.
Component: Live Communications Applications Module Error code: C3F2765F!_HRX! (APIEM_E_ESBASE_MISSING!_HRM!)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="LS Server" />
<EventID Qualifiers="50152">12308</EventID>
<Level>2</Level>
<Task>1000</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-10-19T14:25:44.000Z" />
<EventRecordID>1511</EventRecordID>
<Channel>Lync Server</Channel>
<Computer>ComputerName.com</Computer>
<Security />
</System>
<EventData>
<Data>Live Communications Applications Module</Data>
<Data>C3F2765F</Data>
<Data>APIEM_E_ESBASE_MISSING</Data>
</EventData>
</Event>
Log Name: Lync Server
Source: LS User Services
Date: 10/19/2010 10:25:44 AM
Event ID: 32108
Task Category: (1006)
Level: Warning
Keywords: Classic
User: N/A
Computer: ComputerName.com
Description:
Pool Manager changed state of Registrar with FQDN: ComputerName.com to Inactive.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="LS User Services" />
<EventID Qualifiers="33774">32108</EventID>
<Level>3</Level>
<Task>1006</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-10-19T14:25:44.000Z" />
<EventRecordID>1512</EventRecordID>
<Channel>Lync Server</Channel>
<Computer>ComputerName.com</Computer>
<Security />
</System>
<EventData>
<Data>ComputerName.com</Data>
</EventData>
</Event>
Log Name: Lync Server
Source: LS Routing Data Sync Agent
Date: 10/19/2010 10:25:44 AM
Event ID: 48002
Task Category: (1058)
Level: Information
Keywords: Classic
User: N/A
Computer: ComputerName.com
Description:
The Routing Data Sync Agent is stopping.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="LS Routing Data Sync Agent" />
<EventID Qualifiers="17442">48002</EventID>
<Level>4</Level>
<Task>1058</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-10-19T14:25:44.000Z" />
<EventRecordID>1513</EventRecordID>
<Channel>Lync Server</Channel>
<Computer>ComputerName.com</Computer>
<Security />
</System>
<EventData>
</EventData>
</Event>
Log Name: Lync Server
Source: LS MCU Factory
Date: 10/19/2010 10:25:44 AM
Event ID: 51003
Task Category: (1021)
Level: Information
Keywords: Classic
User: N/A
Computer: ComputerName.com
Description:
Lync Server MCU Factory stopping.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="LS MCU Factory" />
<EventID Qualifiers="17405">51003</EventID>
<Level>4</Level>
<Task>1021</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-10-19T14:25:44.000Z" />
<EventRecordID>1514</EventRecordID>
<Channel>Lync Server</Channel>
<Computer>ComputerName.com</Computer>
<Security />
</System>
<EventData>
</EventData>
</Event>
- Edited by NR001 Tuesday, October 19, 2010 2:30 PM
Attempt to start your front end service and refresh that log. That error you posted is a result of the front end service being down, but there should be something when you try to start the front end service that throws an error.
Most of the time when services won't start it is certificate related. Can you confirm you have a valid certificate installed and assigned to the services that matches the FQDN of your pool/server name?
Thanks.
I check all the Cert they all looks good
onther option I can try is rebuild server and try again
let you know soon
thanks for you help
- Marked as answer by Ben-Shun Zhu Wednesday, October 27, 2010 9:08 AM
I check all the Cert they all looks good
onther option I can try is rebuild server and try again
let you know soon
thanks for you help
- Marked as answer by Ben-Shun Zhu Wednesday, October 27, 2010 9:08 AM
have had the exact same problem. Fresh Install. Front-End service won't stay started. Uninstalling and reinstalling is not an acceptable solution. I know my certificates are installed properly.
I have this exact same issue, installing a brand new enterprise front end. We have uninstalled & reinstalled and still get the same errors (different event ids) as referenced above, this is for lync server 2010
event 30236
Cause: The server configuration requires the UserServices module to be registered and active. However the configuration information is not found.
Resolution:
UserServices configuration is installed at setup time. Check the application list and ensure that it is present. If it is not present, reinstall the server. If this problem occurred after you installed a new application, contact the application vendor to rectify
the problem.
event 12308
A component could not be started. The service has to stop.
Component: Live Communications Applications Module Error code: C3F2765F!_HRX! (APIEM_E_ESBASE_MISSING!_HRM!)
Event ID 30211
Failed to initialize the API subsystem.
Cause: Review earlier events to determine the specific reason APIEM failed to initialize.
I'm also seeing the same general error:
Component: Live Communications Applications Module Error code: C3F2765F!_HRX! (APIEM_E_ESBASE_MISSING!_HRM!)
But I have Event ID 12308
New installs of Lync as well, on two different front end servers.
We worked with Microsoft and eventually had to reimage the box then the installation was fine and everything worked as expected...
We had a similar issue. The installation account did not have sufficient permission in the child domain to activate the server / services. Also saw Global Activation failures in the logs when we ran "enable-cstopology".
Ended up adding the installation account to the domain admins group of the child domain. Activation succeeded and we removed the account again.
- Proposed as answer by JVantonder Thursday, November 08, 2012 7:54 AM
We had a similar issue. The installation account did not have sufficient permission in the child domain to activate the server / services. Also saw Global Activation failures in the logs when we ran "enable-cstopology".
Ended up adding the installation account to the domain admins group of the child domain. Activation succeeded and we removed the account again.
- Proposed as answer by JVantonder Thursday, November 08, 2012 7:54 AM
Hi JVantonder,
Nices tip, i used "Enable-CsTopology" and discover issue with objects in AD.
Error: An error occurred: "Microsoft.Rtc.Management.Deployment.ActiveDirectoryException" "Found multiple objects with identity "Server.domain.com,MediationServer" in Active Directory." xx/xx20xx xx:xx:xx PM Error
Finally i used the next steps for finf and delete the duplicate objects.
1) Run Test-CsTopology -Report C:\temp\Resulttopology.html 2) Prepare the appropriate AD for a TXT file:Ldifde -f c:\temp\ADObjects.txt -s DC_FQDN -d "CN=RTC Service, CN=Services, CN=Configuration, DC=server, DC=domain, DC=com"3) Find the duplicate entries in txt file. Then delete them from AD using ADSIE Edit
Regards!