Setting Two IP adress in windows 7 ultimate pc
Dear Sir When I am adding two ip adressess in one pc one is 192.168.1.2 & another is 172.25.39.5 (Local Router Ip address) . After addition of two networks internet is properly not working means some sites are working & some sites are not working like facebook, Gmail,Yahoo mail, so please guide me .
August 30th, 2012 1:51am

Is that two NICs or two IPs on one NIC? What is the default gateway setting? (You can only have one per machine, not one per NIC). Bill
Free Windows Admin Tool Kit Click here and download it now
August 30th, 2012 3:24am

Can you type ipconfig /all and post the output here? Possible reason for specific sites not working are: Name resolution problem (Solution: Manually set DNS to 8.8.8.8)Browser issue (Solution: Install an alternative browser and check again)Restrictions on local computer (Solution: Check for settings in hosts file: %windir%\drivers\etc\hosts , parental control systems or other restrictions on the computer)Problems with the router, unlikely though (Solution: Factory reset the router) Jaap Brasser http://www.jaapbrasser.com
August 30th, 2012 3:27am

Hi, Please double check your default gateway settings and DNS settings. You could also refer to this thread: How to assign different/multiple IP address to NIC network card Regards,Vincent Wang TechNet Community Support
Free Windows Admin Tool Kit Click here and download it now
August 31st, 2012 4:06am

Hi You haven't mentioned the netmask ... if you set this wrongly then it could cause the problem you described. You should set: 192.168.1.2 & netmask 255.255.0.0 172.25.39.5 & netmask 255.240.0.0 see http://en.wikipedia.org/wiki/IP_Addressing#IPv4_private_addresses Regards Luke
August 31st, 2012 4:58am

This topic is archived. No further replies will be accepted.

Other recent topics Other recent topics