Hi, We have windows 7 x64 Sp1 systems in domain network Since last few days we face RDP connection problem. Till now we have checked and verified following. 1. Uninstall and reinstall KB2621440 and KB2667402 2. There are no logs in event viewer regarding RDP connection. 3. Also the RDP port 3389 is not listening and shows blank using command netstat -abn | findstr 3389 4. Verified the registry settings HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\ fDenyTSConnections to 0 5. Turnoff\Disabled Windows Firewall Ref : http://social.technet.microsoft.com/Forums/en/w7itproui/thread/26f255ca-d168-488c-978e-aac579f194e5 Pls Help Thanks, Prakash

please turn the firewall back on and add port to the firewall. then please check router has the port in it with right IP If it has the right port with right ip, please try restart the router. let me know how it goes. www.zon-ze.com

Hi Jongbeom Thanks for reply I have enabled windows firewall again and added the port also, we dont have router. and netstat -abn | findstr 3389 still shows blank See below image

you add the port to inbound right? please check registery that you have right registery for port HKLM\system\currentcontrolset\control\terminal server\winstations\rdp-tcp scroll down and find portNumber if you see that you have 3389 or something else..

Hi Yes port is 3389

Hi, Based on my research, please try the following: 1. Select Dont allow connections to this computer in System Properties, restart your Windows 7 and re-enable Remote Desktop. 2. Open Device Manager and show hidden devices. Check whether Remote Desktop Services Security Filter Driver under Non-Plug and Play Drivers is enabled or disabled. Hope this helps. Jeremy Wu TechNet Community Support

Hi, I tried your steps but didnt Help Thanks

Hi, Does the issue also occur in other Windows 7 machines in the same domain? Also, please try the following: 1. Test the issue again in Clean Boot Mode. 2. Change the listening port for Remote Desktop and see how it works. 3. Check whether resetting Internet Protocol (TCP/IP) can help you. Hope this helps. Jeremy Wu TechNet Community Support

Hi, Does the issue also occurs in other Windows 7 machines in the same domain? Also, please try the following: 1. Test the issue again in Clean Boot Mode. 2. Change the listening port for Remote Desktop and see how it works. 3. Check whether resetting Internet Protocol (TCP/IP) can help you. Hope this helps. Jeremy Wu TechNet Community Support

Hi I have done the changes you suggested but Still RDP not listning the Port Thanks Prakash