I'm trying to implement QOS Policies on Windows Vista. I was able to implement this on Server 2008 RC1. I'm using Netmon 3.1 to capture the traffic. On server 2008 I can see the DSCP value I set in the policy but setting the same policy on Vista the DSCP doesn't change from the default 0 value. Both computers are running on the same exact hardware and using the same NIC drivers. I'veexhausted everything I can think of at this point. Both computers areidentical in everywayexcept for the OS. Any help is greatly apreciated. Thanks in advance.

Some additional information: Both machines are multihomed and the 08 server set the DSCP value no matter what interface I generate traffic out of. However,I have discovered that the Vista box is setting the DSCP valuebut only on one of the interfaces. When I generate the same traffic to a different destination out a different interface the DSCP value remains set to the default value of 0. The QOS policy is generic and should match any source, destination IP's/Ports and both TCP and UDP protocols so I don't know why one interface works and not others. Hope that helps.