Pinging both dynamic and static ip address
we are running windows 7 and We are getting some really strange behavior from the on-board NIC. When it was first put on the network it picked up a DHCP address. Now, even when we assign it a static address, both the DHCP and static IP will ping. Doing an 'arp -a' command shows that both IP's report back the same MAC address. Here is where it starts getting strange: When we disabled the NIC the static IP quits pinging, however the DHCP assigned address keep holding a ping. We turned off the box and both quit pinging. When it came back up both started pinging. If we pull the Ethernet cable from the box, both pings die. We tried doing an 'ipconfig /release' and the command worked, but then about 30 seconds later the DHCP assigned address started pinging again. The DHCP server shows the same MAC address picking up the lease again. We tried to disable IPV6 just in case that was causing the problem, but that didn't help. Any ideas?
November 19th, 2010 2:55pm

Did you make sure to open your command window as administrator? (right click and run as administrator?)
Free Windows Admin Tool Kit Click here and download it now
November 19th, 2010 3:29pm

yes i did run it as administrator and i keep getting the same results
November 19th, 2010 3:39pm

Are you still having this issue and if not, how was it resolved? I'm having the identical problem. Thank you!
Free Windows Admin Tool Kit Click here and download it now
March 7th, 2011 1:31pm

This topic is archived. No further replies will be accepted.

Other recent topics Other recent topics