No Sound after windows RC1 install
Installed Windows 7 , But i cant sound working ,No sound from windows media player , I use onboard audio realtek HD audio ,motherboard is gigabyte GA-945GCM-S2L I tried installing the latest driver , but still no luck ,driver looks installs fine Realtek HD Audio in device manager Sound Works fine in Vista , As i use dual os ( Just loaded Windows 7 ) Any suggestion Guys.
June 5th, 2009 4:39am

Amith-The first thing I would check would be device manager to see exactly what the status is of the hardware. Is it installed correctly?Secondly, I'd triple check to make sure my speakers were plugged into the correct port on the back of the box. It's dark, you could have accidentally plugged it into the wrong one. It happens. Third, I'd make sure they were plugged in properly and turned on and the volume set to what should be an acceptable level. Kinda obvious, but... Fourth, I'd triple check volume control to make sure it wasn't muted and I'd check to make sure the speakers were the default device for audio - not S/PDIF. Right-click on the speaker icon and select Playback Devices - this should list all audio components built into the system. Make sure the speakers have a small green check mark on them. If not, right-click on them and set them as default.
Free Windows Admin Tool Kit Click here and download it now
June 5th, 2009 4:50am

Amith,Once you are done with what Wolfie2k6 said, I'd go back and uninstall the driver and install it in compatibility mode and see if that helps.
June 5th, 2009 4:55am

Thanks Guys As i said i use dual OS , the same works fine in Vista The issue with Windows 7 is ,It displays Realtek HD Audio under device Manager , and default device as spaekers , i can see the green But there is no sound from Windows Media Player I am not sure if the Realtek drivers are compatible with Windows 7 , How do i install them in compatibility mode ?
Free Windows Admin Tool Kit Click here and download it now
June 5th, 2009 5:07am

amith - Ok.. So if you boot into Vista, it's all good - and everything works, when you restart into Win 7, it doesn't...Now... You say you're not getting sound from Windows Media Player - but are you getting anything the speakers otherwise?The Realtek HD audio drivers should be, by default Windows 7 native drivers - and they should have been installed by default when you installed Windows itself. There IS one other thing to check. 1.) Open WMP. 2.) Press the ALT key. This will bring up a menu with the usual things - File, Edit, View, Tools, etc.. 3.) Select Tools | Options. 4.) Look on the Devices tab. 5.) Look for the Speakers on that tab. Click the Properties button.6.) You should see a properties box for the speakers. At the top, there's a drop down allowing you to select the default audio device. 7.) Select the one marked Speakers (HD Audio Device) Click OK and OK. Try playing something. Let us know what happens...
June 5th, 2009 5:53am

amith,You can go to the realtek website and click the HD audio codec driver download link and get the version that says Vista/Windows 7.To install something in compatibility mode, you would right click on the install program, choose 'properties' and then find the 'compatibility' tab. Pick the OS version you want the driver to install as, then ok out and run the install program.
Free Windows Admin Tool Kit Click here and download it now
June 5th, 2009 5:59am

No sound at all Windows 7 just installed the generic HD Audio ,Then i downloaded the latest driver from Gigabyte Website and installed them-- then it came with Realtk HD Audio I can also see a Yellow colour thing "Multimedia Controller " in device manager . In WMP , I have selected the default audio device as Realtek HD Audio Speakers Thanks
June 5th, 2009 6:02am

What video card are you using? If it is ATi 2000HD series or higher the sound is default out your videocard HDMI. Change the default sound device.
Free Windows Admin Tool Kit Click here and download it now
June 5th, 2009 6:12am

I am using Nvidia GEforce 8600 GT
June 5th, 2009 6:13am

I dont think that one has built in sound.
Free Windows Admin Tool Kit Click here and download it now
June 5th, 2009 6:15am

I use gigabyte GA-945GCM-S2L motherboard Which has onboard sound this works fine on Vista , but no sound from Windows 7
June 5th, 2009 6:26am

No sound at all Windows 7 just installed the generic HD Audio ,Then i downloaded the latest driver from Gigabyte Website and installed them-- then it came with Realtk HD AudioI can also see a Yellow colour thing "Multimedia Controller " in device manager .In WMP , I have selected the default audio device as Realtek HD Audio SpeakersThanks amith - Did you get any sound with the "generic" Win 7 HD Audio driver? On my Gigabyte motherboard (granted, it's an Athlon 64 based board), but Realtek is pretty much Realtek...)it and the speakers work brilliantly regardless of which OS I boot into (XP, Vista or 7).
Free Windows Admin Tool Kit Click here and download it now
June 5th, 2009 6:28am

I use gigabyte GA-945GCM-S2L motherboard Which has onboard sound this works fine on Vista , but no sound from Windows 7 The latest drivers for realtek are at www.realtek.com.tw, although until you downloaded from gigabyte and got that yellow flag, I'd have said it was working but under "playback devices", some other, wrong output would have been selected instead of the one you want. I just noticed I have two speaker-icons in my taskbar, one is white (win 7) and one is orange (realtek). Right-clicking on realtek gives me "audio devices". But now with the yellow flag, it gets all convoluted. I think I'd download www.realtek.com.tw generic HD codec, for (at least) vista, don't bother with compatability. run the set up program, and see if that helped; or uninstall and run set up again. After all that, assuming it works, left click the white speaker icon and choose "mixer".
June 5th, 2009 9:43am

Hello amith_angel,Have you tried browsing for the driver in your Windows Vista installation? When you install the driver through Device Manager browse to whichever drive contains Windows Vista and go to Windows>System32>drivers and let Windows 7 scan that folder.
Free Windows Admin Tool Kit Click here and download it now
June 5th, 2009 10:39pm

HI GUYSi fixed the problem thought of sharing , you need to install the latest driver from realtek , delete all infs realted to Realtk HD audio from C:\windows\InfInstall the latest drivers , before you do this unplug the speaker jack , once the driver install is complete plug it back ,Realtek comes up with a prompt telling Plugged on the rear end hit ok .After this audio/sound was alright.
June 10th, 2009 6:16am

Same problem. I cannot find anything under C:\windows\inf. What am I doing wrong? Is there another folder I should be looking for? Thanks.
Free Windows Admin Tool Kit Click here and download it now
June 11th, 2009 10:55pm

pirate9,Is your Windows 7 install in the C: drive? I have many folders and files that are not hidden files in my inf directory. Of course in my case it's D:\Windows\inf.
June 12th, 2009 1:59am

I use gigabyte Intel DP35DP motherboard Which has onboard sound this works fine on Vista , but no sound from Windows 7? Thankshttp://downloadcenter.intel.com/Filter_Results.aspx?strOSs=All&strTypes=All&ProductID=2782=eng&OSFullName=All%20Operating%20Systemsthis driver dont't work :(
Free Windows Admin Tool Kit Click here and download it now
June 21st, 2009 7:55pm

my speakers don't show up under in the playback devices tab :( I right clicked in the open space underneath the S/PDIF and checked "show disconnected" and "disabled" devices. I have done everything everyone has said on this page and still nothing. With the Volume Mixer open and I play music, I can see that music playing from the little green bar-but no sound. Please help me!! This has only happened since I upgraded to Windows 7!
February 18th, 2011 6:51pm

amith - Ok.. So if you boot into Vista, it's all good - and everything works, when you restart into Win 7, it doesn't... Now... You say you're not getting sound from Windows Media Player - but are you getting anything the speakers otherwise? The Realtek HD audio drivers should be, by default Windows 7 native drivers - and they should have been installed by default when you installed Windows itself. There IS one other thing to check. 1.) Open WMP. 2.) Press the ALT key. This will bring up a menu with the usual things - File, Edit, View, Tools, etc.. 3.) Select Tools | Options. 4.) Look on the Devices tab. 5.) Look for the Speakers on that tab. Click the Properties button. 6.) You should see a properties box for the speakers. At the top, there's a drop down allowing you to select the default audio device. 7.) Select the one marked Speakers (HD Audio Device) Click OK and OK. Try playing something. Let us know what happens... Did this..still nothing.
Free Windows Admin Tool Kit Click here and download it now
February 18th, 2011 7:08pm

This topic is archived. No further replies will be accepted.

Other recent topics Other recent topics