Hi expert :)

i have these two installed and ready nodes 

1-isa1 IP:192.168.25.27

2-isa2 IP:192.168.125.10 

my network rang IPs are from 192.168.0.0 to 192.168.255.255 & 10.0.0.0 to 10.255.255.255

i need to set virtual IP for NLB between my nodes

What VIP should i put in internal network and what VIP should i put for external network ??

Thanks in advanced

• Edited by Salehice 19 hours 24 minutes ago

Hi,

The combination of the virtual IP address and mask must yield the same subnet as the combination of the IP address and mask of the adapter in the network. The virtual IP address must belong to the network. To add virtual IP addresses, on the NLB tab of the network properties, click Add VIP. Each of the addresses will be added to the matching network's network adapter with same subnet mask as that of the primary virtual IP address.

Reference:SREE_H_VIP

                https://technet.microsoft.com/en-us/library/bb794806.aspx

Best Regards,

Joyce