How to change Local Area Connection from Public to Home Group
I was unable to find my question listed elsewhere here.After installing 7 Ultimate 64, my PC found and utilized the wireless USB adapter that was present, along with the wired NIC that was unused at that time. I created my home group, et al, and all was fine.However, a few weeks later I connected via the ethernet cable and when it found a connection it identified it as Unknown and placed it in the Public network. I cannot ascertain how to modify my wired NIC from Public to Home Group, after many hours of trying and googling.Any suggestions? Here's hoping it's something easy that I'm greatly overlooking.Thanks!db
March 15th, 2010 9:04pm

It actually is something easy.Open Network and Sharing Center. Under "view your active networks" will be your current network connection (your LAN connection, in this case.) Click the "Public network" link, and you'll get the "choose a network type" selection window. Change as appropriate, and click OK.HTH,Chris[If this post helps to resolve your issue, please click the "Mark as Answer" or "Helpful" button at the top of this message. By marking a post as Answered, or Helpful you help others find the answer faster.]
Free Windows Admin Tool Kit Click here and download it now
March 16th, 2010 6:06am

Hi, You can also try the following steps. 1. Open Device Manager and temporarily disable all other unused network adapters. 2. Temporarily turn off firewall on the machine and router (If it has). 3. Upgrade the NIC driver. 4. Restart the computer to Safe Mode with Networking to check the result. 5. Configure the connection to obtain an IP address automatically ======================================= a. Click "Start", input "NCPA.CPL" (without quotation marks) to Start Search bar and press "Enter". b. Right-click the network connection and click "Properties". If you are prompted for an administrator password or confirmation, type the password or provide confirmation. c. Click to highlight "Internet Protocol Version 6 (TCP/IPv6)" and click "Properties". d. Check "Obtain an IP address automatically" and "Obtain DNS server address automatically". e. Click "OK". f. Click to highlight "Internet Protocol Version 4 (TCP/IPv4)" and click "Properties". g. Check "Obtain an IP address automatically" and "Obtain DNS server address automatically". h. Click "OK". i. Reboot the computer. If the issue persists, please also try the following steps. unidentified Network Thanks, Novak
March 16th, 2010 11:12am

It actually is something easy. Open Network and Sharing Center. Under "view your active networks" will be your current network connection (your LAN connection, in this case.) Click the "Public network" link, and you'll get the "choose a network type" selection window. Change as appropriate, and click OK. HTH, Chris No. I have exactly the same problem, and the "public network" is written in black type not blue and cannot be changed. Why not, I wonder?
Free Windows Admin Tool Kit Click here and download it now
July 17th, 2010 1:18am

Had same problem steps that worked for me. disable all other interfaces. Ensure the required interface is set for dynamic IP Go to the command prompt with admin rights and type "netsh int ip reset" then reboot pc. you may have to recheck the network interface and set to dynamic ip again Pips Sandhu A4 IT Services Ltd
April 5th, 2011 3:23pm

This topic is archived. No further replies will be accepted.

Other recent topics Other recent topics