Host must send an ARP Request? How to do?
What the stale state "covers"? What is behind this question?
Rgds
Milos
September 12th, 2012 4:59pm
Description of Address Resolution Protocol (ARP) caching behavior in Windows Vista TCP/IP implementations
Therefore, the "Reachable Time" value is somewhere between 15 seconds (30 0.5 seconds) and 45 seconds (30 1.5 seconds). If an entry is not used for a time between 15 to 45 seconds, it changes to the "Stale" state. Then,
the host must send an ARP Request for IPV4 to the network when any IP datagram is sent to that destination.
Microsoft says ARP caching behavior above paragraph.
How do I send an ARP Request for IPv4 to the network, at that stale state ?
Free Windows Admin Tool Kit Click here and download it now
September 13th, 2012 1:18am
Hi,
Please check out the following value:
ArpRetryCount
Key: Tcpip\Parameters
Value Type: REG_DWORDNumber
Valid Range: 03
Default: 3
Description: This value controls the number of times that the computer sends a gratuitous Address
Resolution Protocol (ARP) Request message for its own IPv4 address(es) while initializing. Gratuitous ARP requests are sent to ensure that the IPv4 address is not already in use on the locally attached subnet. The value controls the actual number of ARP requests
sent, not the number of retries.
For more information about TCP/IP registry values for Windows Vista and for Windows Server 2008, visit the following Web site:
http://download.microsoft.com/download/c/2/6/c26893a6-46c7-4b5c-b287-830216597340/TCPIP_Reg.docTracy Cai
TechNet Community Support
September 13th, 2012 1:56am
Hi,
Please check out the following value:
ArpRetryCount
Key: Tcpip\Parameters
Value Type: REG_DWORDNumber
Valid Range: 03
Default: 3
Description: This value controls the number of times that the computer sends a gratuitous Address
Resolution Protocol (ARP) Request message for its own IPv4 address(es) while initializing. Gratuitous ARP requests are sent to ensure that the IPv4 address is not already in use on the locally attached subnet. The value controls the actual number of ARP requests
sent, not the number of retries.
For more information about TCP/IP registry values for Windows Vista and for Windows Server 2008, visit the following Web site:
http://download.microsoft.com/download/c/2/6/c26893a6-46c7-4b5c-b287-830216597340/TCPIP_Reg.docTracy Cai
TechNet Community Support
Free Windows Admin Tool Kit Click here and download it now
September 13th, 2012 1:58am
What the stale state "covers"? What is behind this question?
Rgds
Milos
September 13th, 2012 5:02pm
This should automatically be handled when the next packet needs to be sent to the destination. Do you have something in your network that is blocking ARP requests or are you receiving some sort of other error?
--
Mike Burr
Mike's Technology and Finance Blog
Learn to Troubleshoot Windows BSODs
Free Windows Admin Tool Kit Click here and download it now
September 20th, 2012 9:51am