Have to reset Network adoptor frequntly
i have USB IAD modem( usingConnexant Viking driver)whenever computer goes to sleep mode and is restarted my Ip address changes to 169.254.35.15 from 192.168.1.2and running ipconfig/release ipconfig/renew with elevated privilege produces no result. you have to use troubleshoot network connection wizard to get back 192.168.1.2 address.How I can avoid this.regardsAdiA K
November 10th, 2009 1:42pm

Hi Adi10, You may try the following steps to check the issue. 1. Click Start button, type devmgmt.msc (without quotation marks) in the Search bar and press Enter. 2. Double click to expand "Network adapters". 3. Right click your network card and click "Properties". 4. Click Power Management, uncheck Allow the computer to turn off this device to save power and Allow this device to wake the computer boxes. 5. Click OK. Whats the result? If it does not work, I also suggest you update the BIOS and motherboard drivers. Good luck!Arthur Li - MSFT
Free Windows Admin Tool Kit Click here and download it now
November 11th, 2009 5:29am

Than you Arthur Li , the Problem is solved. i took time to report back , to see if its not happening again. regards adiA K
November 29th, 2009 9:09am

This topic is archived. No further replies will be accepted.

Other recent topics Other recent topics