Current Setup -
Two 2012 R2 servers in an NLB cluster
Hi All,
Having some issues with manage out. We use SCCM to remote onto DA clients it used to work fine using the DA server as a ISATAP router.
However not sure what's gone wrong but helpdesk machines that now point to the DA server as an ISATAP router no longer recieve an IPV6 address unless they are on the same IP range as the DA server.
So for example DA server IP address 10.1.1.5
Helpdesk machine 10.1.104.30 - ISATAP adapter shows a IPV6 local link IP address
if i change the IP address of the helpdesk machine to 10.1.1.10 for example it will pick up an IPV6 address on the ISATAP interface (this used to work before regardless of what range you are on)
The only thing i can think of that has changed is that i virtualised the DA servers not to long ago and set the NLB clusters both internal and external to MULTICAST from UNICAST as per recommendations online when running DA on VMWare.
I know ISATAP isn't offically supported by MS on 2012 R2 - but this used to work fine, so any help would be greatly appreicated.