I've been getting the following system errors after the computer reboots for no apparent reason: Source: system error category: (102) event id: 1003Error code 1000000a, parameter1 00000016, parameter2 0000001c, parameter3 00000000, parameter4 80502eb4.-------------------------------------------------------------------------------------------------------------------------------------------------------------Source: MrxSmb category: none event id: 8003The master browser has received a server announcement from the computer HOME-6EE4980C55 that believes that it is the master browser for the domain on transport NetBT_Tcpip_{4002E3A8-23C. The master browser is stopping or an election is being forced. I have a *.dmp file associated with the first above error, but am unable to read it1 person needs an answerI do too

You reported details of bugcheck 0x1000000a (0xa), which is IRQL_NOT_LESS_OR_EQUAL. In your case, code running at memory address 0x80502eb4 tried to read bogus memory address 0x16 and an inappropriate time.When did the problem start? Did you recently remove or add any hardware or software?Start here: Can you upload the contents of c:\windows\minidump to your SkyDrive and provide a link?For dealing with Blue Screens, general guidance follows:Consider running chkdsk on all partitions. Let chkdsk complete on each partition and see if that helps.Also consider running SFC /SCANNOW.If you boot into safe mode, do you still experience bugchecks? What about if you do a clean boot, or device clean boot?Consider testing memory with Windows Memory Diagnostic or memtest86. Note that memory that passes tests is not necessarily good memory - it just hasn't failed a test. Consider systematically eliminating RAM from the system - run with a couple of modules for a while, and see how things go. Then try the other modules.Other common suggestions include ensuring drivers are up to date (including video drivers), as well as ensuring that you're using the latest BIOS.It can be helpful to use Driver Verifier. To enable Driver Verifier... start->verifier.exe->OK->Create standard settings- >Next->select driver names from a list->Next->sort by Provider->select all non-Microsoft drivers->Finish, and OK your way out of the dialog.Then, reboot and use the system as you normally would, and wait for a problem. In the event that the system does not boot completely after enabling driver verifier, boot into Safe Mode and run driver verifier, and tell it to delete the changes.Wait for a bugcheck to occur after enabling verifier as described, and then upload it to your SkyDrive, and provide a link.