Applying operation update even not installing or update anything.
My notebook is windows 7 Pro 64bit.
The TrustedInstaller.exe memory usage used about 500M in task manager after i went back for lunch. This happen everytime i came back from lunch..
After seeing this, I restart my notebook. It went into configuring windows update XX% complete.. then applying update operation XXX of 92975 (it does not finish until 92975)... then failure configuring windows features. reverting changes. and it went to
the login screen...
I did not did any windows update nor installing any windows component.
I had run MicrosoftFixit50202.msi and clicked on the check for update in the windows update but it didnt works.
How do I stop seeing the applying update operation XXX.... even i did not install any update? It is very
irritating to see this.
July 1st, 2010 10:39am
Hi,
I read a lot on this process TrustedInstaller.exe, many people refer it to automatice update and windows update etc. However, 92975 does not sound windows updates check. Make sure you have disabled automatic update and set windows update as "Never check
for updates (not recommended)" from control panel->windows update. If this did not resolve the issue, then it may have something to do with either currupt third party software or spyware.
I suggest perform the following to troubleshoot the issue:
1.Navigate to Control Panel\All Control Panel Items\Action Center\Problem Reports, and click "clear all problem reports", then OK.
2. Prepare clean boot in case it is third party software conflict.
Clean Boot prevents software conflicts by preventing the startup items and non Microsoft services from loading. This way you can safely follow the process of elimination to check which application is causing this behavior.
Refer:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.microsoft.com/kb/929135
Note: Ensure that you put your computer back to normal startup mode after completing the troubleshooting steps. Steps are available in the article given above.
Regards,
Please remember to click Mark as Answer on the post that helps you, and to click Unmark as Answer if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Free Windows Admin Tool Kit Click here and download it now
July 5th, 2010 12:04pm
From the Problem Report, I did see some items on the windows modules installer. I also attached the lpksetup log file. The content of the lpupdate log file is the same for everyday. There should be something wrong with the language pack.
I had also run sfc /scannow and everything is ok.
Anyone can help?
------
Problem Report details:
Source
Windows Modules Installer
Summary
WINDOWS_WCP_POQEXEC_FAILURE2
Date
05/07/2010 02:37 PM
Status
Report sent
Problem signature
Problem Event Name: WINDOWS_WCP_POQEXEC_FAILURE2
OsVersion: 6.1.7600
Status: c0190003
Operation: DeleteFile
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033
Extra information about the problem
Bucket ID: 666740415
---------------------------------------
Source
Windows Modules Installer
Summary
CbsPackageServicingFailure2
Date
05/07/2010 02:38 PM
Status
Report sent
Problem signature
Problem Event Name: CbsPackageServicingFailure2
Stack Version: 6.1.7600.16385
Package: Microsoft-Windows-Client-LanguagePack-Package
Version: 6.1.7600.16385
Architecture: amd64
Culture: zh-TW
Status: 80071a2d
Failure Source: POQ
Start State: Installed
Target State: Absent
Client Id: lpksetup
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 18441
Extra information about the problem
Bucket ID: 787237063
---------------------------------------
Source
Windows Modules Installer
Summary
CbsPackageServicingFailure2
Date
05/07/2010 02:38 PM
Status
Report sent
Problem signature
Problem Event Name: CbsPackageServicingFailure2
Stack Version: 6.1.7600.16385
Package: Microsoft-Windows-Client-LanguagePack-Package
Version: 6.1.7600.16385
Architecture: amd64
Culture: ja-JP
Status: 80071a2d
Failure Source: POQ
Start State: Installed
Target State: Absent
Client Id: lpksetup
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033
Extra information about the problem
Bucket ID: 868058210
---------------------------------------
Source
Windows Modules Installer
Summary
CbsPackageServicingFailure2
Date
05/07/2010 02:38 PM
Status
Report sent
Problem signature
Problem Event Name: CbsPackageServicingFailure2
Stack Version: 6.1.7600.16385
Package: Microsoft-Windows-Client-LanguagePack-Package
Version: 6.1.7600.16385
Architecture: amd64
Culture: ko-KR
Status: 80071a2d
Failure Source: POQ
Start State: Installed
Target State: Absent
Client Id: lpksetup
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033
Extra information about the problem
Bucket ID: 857674635
---------------------------------------
Source
Windows Modules Installer
Summary
CbsPackageServicingFailure2
Date
05/07/2010 02:38 PM
Status
Report sent
Problem signature
Problem Event Name: CbsPackageServicingFailure2
Stack Version: 6.1.7600.16385
Package: Microsoft-Windows-Client-LanguagePack-Package
Version: 6.1.7600.16385
Architecture: amd64
Culture: zh-TW
Status: 80071a2d
Failure Source: POQ
Start State: Installed
Target State: Absent
Client Id: lpksetup
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 18441
Extra information about the problem
Bucket ID: 787237063
lpksetup file:
13:47:52:177 : INFO: _wsetlocale returns: English_United States.1252
13:47:52:179 : PERF: CbsClient::Initialize - ENTER
13:47:54:297 : INFO: created Cbs session 0x3ad148
13:47:54:314 : DEBUG: Found TI process (C:\Windows\servicing\TrustedInstaller.exe)
13:47:54:316 : PERF: CbsClient::Initialize - LEAVE
13:47:54:337 : License "Kernel-MUI-Number-Allowed" queried, value: "1"
13:47:54:340 : DEBUG: Attempting to enumerate HKLM\System\CurrentControlSet\Control\MUI\UILanguages
13:47:54:341 : PERF: CbsClient::Initialize - ENTER
13:47:54:343 : PERF: CbsClient::Initialize - LEAVE
13:47:54:344 : PERF: Enumerating installed languages - ENTER
13:47:54:586 : DEBUG: CreateFromIdentity("Microsoft-Windows-Client-LanguagePack-Package~31bf3856ad364e35~amd64~en-US~6.1.7600.16385")
13:47:54:589 : DEBUG: CreateFromIdentity("Client")
13:47:54:591 : LanguagePack en-US created.
13:47:54:593 : type: MUI
13:47:54:604 : identity: Microsoft-Windows-Client-LanguagePack-Package~31bf3856ad364e35~amd64~en-US~6.1.7600.16385
13:47:54:607 : WARN: Unable to open Language reg key
13:47:54:645 : DEBUG: CreateFromIdentity("Microsoft-Windows-Client-LanguagePack-Package~31bf3856ad364e35~amd64~ja-JP~6.1.7600.16385")
13:47:54:647 : DEBUG: CreateFromIdentity("Client")
13:47:54:649 : LanguagePack ja-JP created.
13:47:54:651 : type: MUI
13:47:54:653 : identity: Microsoft-Windows-Client-LanguagePack-Package~31bf3856ad364e35~amd64~ja-JP~6.1.7600.16385
13:47:54:656 : WARN: Unable to open Language reg key
13:47:54:679 : DEBUG: CreateFromIdentity("Microsoft-Windows-Client-LanguagePack-Package~31bf3856ad364e35~amd64~ko-KR~6.1.7600.16385")
13:47:54:681 : DEBUG: CreateFromIdentity("Client")
13:47:54:682 : LanguagePack ko-KR created.
13:47:54:684 : type: MUI
13:47:54:685 : identity: Microsoft-Windows-Client-LanguagePack-Package~31bf3856ad364e35~amd64~ko-KR~6.1.7600.16385
13:47:54:687 : WARN: Unable to open Language reg key
13:47:54:717 : DEBUG: CreateFromIdentity("Microsoft-Windows-Client-LanguagePack-Package~31bf3856ad364e35~amd64~th-TH~6.1.7600.16385")
13:47:54:720 : DEBUG: CreateFromIdentity("Client")
13:47:54:722 : LanguagePack th-TH created.
13:47:54:723 : type: MUI
13:47:54:724 : identity: Microsoft-Windows-Client-LanguagePack-Package~31bf3856ad364e35~amd64~th-TH~6.1.7600.16385
13:47:54:726 : WARN: Unable to open Language reg key
13:47:54:773 : DEBUG: CreateFromIdentity("Microsoft-Windows-Client-LanguagePack-Package~31bf3856ad364e35~amd64~zh-TW~6.1.7600.16385")
13:47:54:775 : DEBUG: CreateFromIdentity("Client")
13:47:54:777 : LanguagePack zh-TW created.
13:47:54:779 : type: MUI
13:47:54:780 : identity: Microsoft-Windows-Client-LanguagePack-Package~31bf3856ad364e35~amd64~zh-TW~6.1.7600.16385
13:47:54:782 : WARN: Unable to open Language reg key
13:47:54:792 : PERF: Enumerating installed languages - LEAVE
13:47:54:793 : Main execution thread will wait for completion of CBS install/remove operation...
13:47:54:793 : PERF: zh-TW initialization - ENTER
13:47:54:796 : PERF: RestorePointStart - ENTER
13:49:04:006 : PERF: RestorePointStart - LEAVE
13:49:16:887 : PERF: zh-TW initialization - LEAVE
13:49:16:913 : PERF: zh-TW operation - ENTER
13:49:16:915 : CBS: CbsClient::Initiate(language=zh-TW)
13:49:16:917 : CBS: CbsClient::Progress(state=7,ticks=26,total=2587)
13:49:16:919 : CBS: CbsClient::Progress(state=7,ticks=51,total=2587)
13:49:16:920 : CBS: CbsClient::Progress(state=7,ticks=76,total=2587)
...
13:49:22:814 : CBS: CbsClient::Progress(state=7,ticks=4311,total=2587)
13:52:40:638 : CBS: CbsClient::Progress(state=5,ticks=2587,total=2587)
13:52:48:365 : CBS: CbsClient::Progress(state=7,ticks=2587,total=2587)
13:52:50:511 : CBS: CbsClient:Terminate()
13:52:50:513 : PERF: zh-TW operation - LEAVE
13:52:50:516 : INFO: Session 0x3ad148 finalized, reporting a required reboot
13:52:50:518 : INFO: destroying CbsSession 0x3ad148
13:52:50:520 : INFO: attempt to re-finalize session 0x3ad148 not acted on
13:52:50:522 : PERF: ja-JP initialization - ENTER
13:52:50:553 : INFO: created Cbs session 0x55d4378
13:53:25:615 : PERF: ja-JP initialization - LEAVE
13:53:25:686 : PERF: ja-JP operation - ENTER
13:53:25:688 : CBS: CbsClient::Initiate(language=ja-JP)
13:53:25:692 : CBS: CbsClient::Progress(state=7,ticks=1,total=2557)
13:53:25:694 : CBS: CbsClient::Progress(state=7,ticks=26,total=2557)
13:53:25:696 : CBS: CbsClient::Progress(state=7,ticks=51,total=2557)
...
13:55:26:510 : CBS: CbsClient::Progress(state=5,ticks=2557,total=2557)
13:55:28:120 : CBS: CbsClient::Progress(state=0,ticks=2557,total=2557)
13:56:02:589 : CBS: CbsClient::Progress(state=7,ticks=2557,total=2557)
13:56:03:046 : CBS: CbsClient:Terminate()
13:56:03:048 : PERF: ja-JP operation - LEAVE
13:56:03:052 : INFO: Session 0x55d4378 finalized, reporting a required reboot
13:56:03:054 : INFO: destroying CbsSession 0x55d4378
13:56:03:055 : INFO: attempt to re-finalize session 0x55d4378 not acted on
13:56:03:057 : PERF: ko-KR initialization - ENTER
13:56:03:061 : INFO: created Cbs session 0x55d4378
13:56:14:762 : PERF: ko-KR initialization - LEAVE
13:56:14:764 : PERF: ko-KR operation - ENTER
13:56:14:765 : CBS: CbsClient::Initiate(language=ko-KR)
13:56:14:767 : CBS: CbsClient::Progress(state=7,ticks=1,total=2527)
13:56:14:768 : CBS: CbsClient::Progress(state=7,ticks=26,total=2527)
13:56:14:769 : CBS: CbsClient::Progress(state=7,ticks=51,total=2527)
...
13:57:30:155 : CBS: CbsClient::Progress(state=0,ticks=2527,total=2527)
13:57:30:672 : CBS: CbsClient::Progress(state=5,ticks=2527,total=2527)
13:57:43:939 : CBS: CbsClient::Progress(state=7,ticks=2527,total=2527)
13:57:44:217 : CBS: CbsClient:Terminate()
13:57:44:219 : PERF: ko-KR operation - LEAVE
13:57:44:223 : INFO: Session 0x55d4378 finalized, reporting a required reboot
13:57:44:224 : INFO: destroying CbsSession 0x55d4378
13:57:44:226 : INFO: attempt to re-finalize session 0x55d4378 not acted on
13:57:44:229 : PERF: th-TH initialization - ENTER
13:57:44:233 : INFO: created Cbs session 0x55d4378
13:57:59:851 : PERF: th-TH initialization - LEAVE
13:57:59:853 : PERF: th-TH operation - ENTER
13:57:59:855 : CBS: CbsClient::Initiate(language=th-TH)
13:57:59:857 : CBS: CbsClient::Progress(state=7,ticks=1,total=2497)
13:57:59:858 : CBS: CbsClient::Progress(state=7,ticks=25,total=2497)
13:57:59:860 : CBS: CbsClient::Progress(state=7,ticks=49,total=2497)
...
13:58:18:162 : CBS: CbsClient::Progress(state=7,ticks=4152,total=2497)
13:59:12:299 : CBS: CbsClient::Progress(state=5,ticks=2497,total=2497)
13:59:29:595 : CBS: CbsClient::Progress(state=7,ticks=2497,total=2497)
13:59:29:859 : CBS: CbsClient:Terminate()
13:59:29:861 : PERF: th-TH operation - LEAVE
13:59:29:865 : INFO: Session 0x55d4378 finalized, reporting a required reboot
13:59:29:866 : INFO: destroying CbsSession 0x55d4378
13:59:29:868 : INFO: attempt to re-finalize session 0x55d4378 not acted on
13:59:29:870 : PERF: RestorePointEnd - ENTER
13:59:29:895 : PERF: RestorePointEnd - LEAVE
13:59:29:897 : PERF: User canceled current action!
13:59:29:899 : Main execution thread wait done!
13:59:29:900 : WARN: Reboot is necessary to complete action, but was skipped by user command line choice
13:59:29:902 : DEBUG: Attempting to move key HKLM\System\CurrentControlSet\Control\MUI\UILanguages\zh-TW to HKLM\System\CurrentControlSet\Control\MUI\PendingDelete\zh-TW
13:59:29:939 : INFO: Verification of language zh-TW pending reboot
13:59:29:941 : DEBUG: Attempting to move key HKLM\System\CurrentControlSet\Control\MUI\UILanguages\ja-JP to HKLM\System\CurrentControlSet\Control\MUI\PendingDelete\ja-JP
13:59:29:945 : INFO: Verification of language ja-JP pending reboot
13:59:29:947 : DEBUG: Attempting to move key HKLM\System\CurrentControlSet\Control\MUI\UILanguages\ko-KR to HKLM\System\CurrentControlSet\Control\MUI\PendingDelete\ko-KR
13:59:29:952 : INFO: Verification of language ko-KR pending reboot
13:59:29:953 : DEBUG: Attempting to move key HKLM\System\CurrentControlSet\Control\MUI\UILanguages\th-TH to HKLM\System\CurrentControlSet\Control\MUI\PendingDelete\th-TH
13:59:29:958 : INFO: Verification of language th-TH pending reboot
13:59:30:626 : DEBUG: ScheduleSystemVerification scheduler thread exit code: 80041318
13:59:30:628 : PERF: RestorePointEnd - ENTER
13:59:30:630 : PERF: RestorePointEnd - LEAVE
13:59:30:645 : DEBUG: Cleaning working path in a new process
July 6th, 2010 5:49am
"Applying update operation XXX of 92975" is apply the files that has *.mui
Free Windows Admin Tool Kit Click here and download it now
July 6th, 2010 5:52am
Run the System Update Readiness Tool and then restart your PC to check the result.
Regards,Please remember to click Mark as Answer on the post that helps you, and to click Unmark as Answer if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
July 6th, 2010 10:38am
I had resolved the problem by uninstalling the 4 language packs (zh-TW, ja-JP, ko-KR, th-TH) one by one as stated in the problem report.
Free Windows Admin Tool Kit Click here and download it now
July 7th, 2010 11:00am
Thank you for your feedback. This is very helpful when other people encounter the same issue. Your time and effort is appriciated.
Regards,Please remember to click Mark as Answer on the post that helps you, and to click Unmark as Answer if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
July 8th, 2010 5:50am