windows 2008 domain
<!-- @page { margin: 0.79in } P { margin-bottom: 0.08in } -->
Dear all,
I got it error msg from my domain in the events SWN3 my branch client name . how can i solve it ?
The session setup from computer 'SWN3' failed because the security database does not contain a trust account 'SWN3$' referenced by the specified computer.
USER ACTION
If this is the first occurrence of this event for the specified computer and account, this may be a transient issue that doesn't require any action at this time. Otherwise, the following steps may
be taken to resolve this problem:
If 'SWN3$' is a legitimate machine account for the computer 'SWN3', then 'SWN3' should be rejoined to the domain.
If 'SWN3$' is a legitimate interdomain trust account, then the trust should be recreated.
Otherwise, assuming that 'SWN3$' is not a legitimate account, the following action should be taken on 'SWN3':
If 'SWN3' is a Domain Controller, then the trust associated with 'SWN3$' should be deleted.
If 'SWN3' is not a Domain Controller, it should be disjoined from the domain.
Regards
Subash
June 27th, 2011 7:56am
Please see this both Kb articles they should resolve the problem
Resetting computer accounts in Windows
http://support.microsoft.com/kb/216393
NetLogon Service Fails When Secure Channel Not Functioning
http://support.microsoft.com/kb/150518http://www.virmansec.com/blogs/skhairuddin
Free Windows Admin Tool Kit Click here and download it now
June 27th, 2011 8:59am
Dear boss
i couldn't executive in dos command u have any application or i will tell u my domain and user details
Domain name : node2.kuraimi.com
Client machine name : intel.kuraimi.com
User name of domain : subash
Domain Name : Kuraimi.com
pls how can i executive your command
Regards
Subash
June 27th, 2011 9:53am
netdom reset intel.kuraimi.com /domain:Kuraimi.com
Note: You can get the nedom from windows support tools.
http://www.virmansec.com/blogs/skhairuddin
Free Windows Admin Tool Kit Click here and download it now
June 27th, 2011 10:27am
Dear boss,
1. I executed successfully form my client . Can I executive this command from every clients or through DC enough ?
2. What can i do next steps Boss.
C:\>netdom reset intel.kuraimi.com /domain:kuraimi.com
The secure channel from INTEL.KURAIMI.COM to the domain KURAIMI.COM has been res et. The connection is
with the machine \\CLUSTER_DOMAIN.KURAIMI.COM.
The command completed successfully.
Regards
Subash
June 27th, 2011 11:28am
This is my Branch i got it the error
Ping command is very good 4ms
C:\>NETDOM reset ash5.kuraimi.com /domain:kuraimi.com
The trust relationship between this workstation and the primary domain failed.
The command failed to complete successfully.
Free Windows Admin Tool Kit Click here and download it now
June 27th, 2011 12:45pm
Hello,
do you still have problems in the domain, then please upload:
ipconfig /all >c:\ipconfig.txt [from each DC/DNS Server]
dcdiag /v /c /d /e /s:dcname >c:\dcdiag.txt
repadmin /showrepl dc* /verbose /all /intersite >c:\repl.txt ["dc* is a place holder for the starting name of the DCs if they all begin the same (if more then one DC exists)]
dnslint /ad /s "DCipaddress" (http://support.microsoft.com/kb/321045)
As the output will become large, DON'T
post them into the thread, please use Windows Sky Drive (skydrive.live.com) [with open access!] and add the link from it here. Also the /e in dcdiag scans the complete forest, so better run it on COB.Best regards Meinolf Weber Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
July 3rd, 2011 11:55pm
yes Boss My additional was problem again i rebuild then It is working fine now no problem like everything is normal thanks for giving best solutions .
Regards
Subash
Free Windows Admin Tool Kit Click here and download it now
July 10th, 2011 9:56am