Hi,
I have installed the connector (Windows10.0-KB2790621-x64.msu) and I have used the same procedure as before to skip joining domain and also to skip auto dns server detection on the Windows 10 client.
Something is wrong because I am unable to backup the Windows client. The backup fails almost immediately.
The logs on the client, we can find the lines below (excerpt from SharedServiceHost-ClientMgmtServiceConfig.log) which makes me think at first that it was a problem of certificate and trust between both computers.
However I made further tests. The problem seems to come from the partition on which Windows 10 is installed. Here is the setup. There are 2 SSDs in the computer. The first one had Windows 8.1 and I installed Windows 10 Education on the second one. The first one is partitionned with :
DISKPART> list partition N partition Type Taille Dcalage
------------- ---------------- ------- --------
Partition 1 Rcupration 300 M 1024 K
Partition 2 Systme 100 M 301 M
Partition 3 Rserv 128 M 401 M
Partition 4 Principale 237 G 529 M
(Partition 4 here is mounted as D: drive on Windows 10)
and the second one with :
DISKPART> select disk 1 Le disque 1 est maintenant le disque slectionn. DISKPART> list partition N partition Type Taille Dcalage
------------- ---------------- ------- --------
Partition 1 Principale 465 G 1024 K
Partition 1 here is C: drive.
I can let Windows Server 2012 Essentials R2 backup D: drive, but it fails to backup C: drive.
I must add that I have run 'chkdsk /f' several times on all partitions and there are no errors.
Given the error message below I can see 2 possible reasons :
- ESP partition is too small for the C: drive which is twice as large as the previous D: drive
- C: drive has shadowstorage onto itself as reported by vssadmin and that is not handled properly :
C:\ProgramData\Microsoft\Windows Server\Logs>vssadmin list shadowstoragevssadmin 1.1 - Outil ligne de commande dadministration du service de clich instantan de volume
(C) Copyright 2001-2013 Microsoft Corp.
Association de stockage de clich instantan
Pour le volume : (C:)\\?\Volume{8dcb68c4-2f10-44e0-abdb-870adc4d0a1c}\
Volume de stockage de clich instantan : (C:)\\?\Volume{8dcb68c4-2f10-44e0-abdb-870adc4d0a1c}\
Espace du volume de stockage de clich instantan utilis : 245 Mo (0%).
Espace du volume de clich instantan allou : 1,63 Go (0%).
Espace maximal du volume de clich instantan : 32,6 Go (7%)
(Sorry, messages are in French, hope it is readable anyway)
Any idea of what is going wrong by me and how to solve it ?
Thanks in advance and best regards,
Fabrice
[10220] 150819.225807.3208: Engine: Start
[10220] 150819.225807.3248: Engine: Require Mutual Auth : False
[10220] 150819.225807.3248: Engine: Using TLS
[10220] 150819.225807.3495: Backup: Subject Alternative Name is S-1-5-21-2135399396-61042391-1177841451-1002
[10220] 150819.225807.3505: ChainTrustCertValidator: Build chain failed for the following certificate:
[10220] 150819.225807.3505: ChainTrustCertValidator: Status: RevocationStatusUnknown, StatusInformation: La fonction de rvocation na pas pu vrifier la rvocation du certificat.
[10220] 150819.225807.3505: ChainTrustCertValidator: Status: OfflineRevocation, StatusInformation: La fonction de rvocation na pas pu vrifier la rvocation car le serveur de rvocation tait dconnect.
[10220] 150819.225807.3525: ChainTrustCertValidator: Build chain failed for the following certificate:
[10220] 150819.225807.3525: ChainTrustCertValidator: Status: RevocationStatusUnknown, StatusInformation: La fonction de rvocation na pas pu vrifier la rvocation du certificat.
[10220] 150819.225807.3525: ChainTrustCertValidator: Status: OfflineRevocation, StatusInformation: La fonction de rvocation na pas pu vrifier la rvocation car le serveur de rvocation tait dconnect.
[10220] 150819.225807.4040: Backup: created
[10220] 150819.225807.4050: Engine: Connect to server TITAN, session cdd03385-47db-4465-b7bf-89c4e3d344cd, protocol 512
[10052] 150819.225807.6048: Backup: decrease running task for Microsoft.WindowsServerSolutions.wssg_pc_backup_client after call StartBackup
[10052] 150819.225807.6058: ShutdownWatcher: decreasing running task number for Microsoft.WindowsServerSolutions.wssg_pc_backup_client to 1
[10052] 150819.225807.6079: Backup: increase running task for Microsoft.WindowsServerSolutions.wssg_pc_backup_client after call SendBackupProgress
[10052] 150819.225807.6079: ShutdownWatcher: increasing running task number for Microsoft.WindowsServerSolutions.wssg_pc_backup_client to 2
[10220] 150819.225807.6119: Backup: In Progress. Percentage : 0
[10052] 150819.225807.6159: Backup: In Progress. Percentage : 1
[10052] 150819.225807.6159: Backup: decrease running task for Microsoft.WindowsServerSolutions.wssg_pc_backup_client after call SendBackupProgress
[10052] 150819.225807.6159: ShutdownWatcher: decreasing running task number for Microsoft.WindowsServerSolutions.wssg_pc_backup_client to 1
[10220] 150819.225807.6269: Engine: Volume 8dcb68c4-2f10-44e0-abdb-870adc4d0a1c = C:
[10220] 150819.225807.6279: Backup: In Progress. Percentage : 1
[10220] 150819.225810.0640: Engine: Error capturing ESP volume. Failing. Error code: 0x80070057
[10220] 150819.225810.0979: Engine: Exception: Microsoft.WindowsServerSolutions.DataProtection.PCBackup.BackupUtil.EspCaptureFailedException: Failed to capture ESP partition
Microsoft.WindowsServerSolutions.DataProtection.PCBackup.BackupOp.BackupSetOperation.RunWithoutCatch()
Microsoft.WindowsServerSolutions.DataProtection.PCBackup.BackupOp.BackupSetOperation.Run()
[10220] 150819.225810.1039: Backup: In Progress. Percentage : 1
[10220] 150819.225810.1050: Engine: Failure: EspCaptureFailed, Details: Microsoft.WindowsServerSolutions.DataProtection.PCBackup.BackupUtil.EspCaptureFailedException: Failed to capture ESP partition
Microsoft.WindowsServerSolutions.DataProtection.PCBackup.BackupOp.BackupSetOperation.RunWithoutCatch()
Microsoft.WindowsServerSolutions.DataProtection.PCBackup.BackupOp.BackupSetOperation.Run()
[10220] 150819.225810.1060: Engine: Bytes sent=363, bytes received=37, 0 reconnects
[10076] 150819.225810.2747: Backup: Read catch IOException Impossible de lire les donnes de la connexion de transport : Une connexion tablie a t abandonne par un logiciel de votre ordinateur hte., generation 1, reconnect
[3716] 150819.225810.2757: Backup: increase running task for Microsoft.WindowsServerSolutions.wssg_pc_backup_client after call SendBackupProgress
[3716] 150819.225810.2767: ShutdownWatcher: increasing running task number for Microsoft.WindowsServerSolutions.wssg_pc_backup_client to 2
[3716] 150819.225810.2767: Backup: In Progress. Percentage : 100
[3716] 150819.225810.2767: Backup: decrease running task for Microsoft.WindowsServerSolutions.wssg_pc_backup_client after call SendBackupProgress
[3716] 150819.225810.2777: ShutdownWatcher: decreasing running task number for Microsoft.WindowsServerSolutions.wssg_pc_backup_client to 1
[10220] 150819.225810.3287: Backup: Finished. Status : Failed, Error : EspCaptureFailed
[10220] 150819.225810.3287: ShutdownWatcher: decreasing running task number for Microsoft.WindowsServerSolutions.wssg_pc_backup_client to 0
[10848] 150819.225810.3327: Backup: Priority : 3, Days since Last backup : 10, Window Begin : 1200 , Window End : 1380, Computed End : 1240
[11004] 150819.225810.3337: Engine: Using TLS For Removing Dead Backup Session
[10848] 150819.225810.3377: Backup: Updating Scheduled Task
[10848] 150819.225810.3397: Backup: In Backup Window, backup is already run and next run time is scheduled in same window. Add another day.
[10848] 150819.225810.3567: Backup: Run Time : 1209
[11004] 150819.225810.3587: Backup: Subject Alternative Name is S-1-5-21-2135399396-61042391-1177841451-1002
[10848] 150819.225810.3597: Backup: Creating on idle task. Last successful time :03/08/2015 18:28:40
[10848] 150819.225810.3597: Backup: Creating Backup On Idle Task
[11004] 150819.225810.3617: ChainTrustCertValidator: Build chain failed for the following certificate:
[11004] 150819.225810.3617: ChainTrustCertValidator: Status: RevocationStatusUnknown, StatusInformation: La fonction de rvocation na pas pu vrifier la rvocation du certificat.
[11004] 150819.225810.3617: ChainTrustCertValidator: Status: OfflineRevocation, StatusInformation: La fonction de rvocation na pas pu vrifier la rvocation car le serveur de rvocation tait dconnect.
[11004] 150819.225810.3637: ChainTrustCertValidator: Build chain failed for the following certificate:
[11004] 150819.225810.3637: ChainTrustCertValidator: Status: RevocationStatusUnknown, StatusInformation: La fonction de rvocation na pas pu vrifier la rvocation du certificat.
[11004] 150819.225810.3637: ChainTrustCertValidator: Status: OfflineRevocation, StatusInformation: La fonction de rvocation na pas pu vrifier la rvocation car le serveur de rvocation tait dconnect.
[10848] 150819.225810.3767: Backup: Created Backup On Idle Task. Is Configured : True, Last Backup Time : 08/03/2015 18:28:40, Current Time : 08/19/2015 22:58:10