There are two new issues affecting Virtual Desktop template creation with WMS 2012 with UR1. Issue #1: Some systems fail to create a new or customized virtual desktop template with UR1 applied. UR1 includes an updated MultiPoint Connector which is compatible with a UR1 host. The Connector gets included in the Virtual Desktop template so that the virtual desktops can be managed by MultiPoint Dashboard. On some systems installation of the UR1 Connector will require a reboot that takes too long to complete and template creation will timeout. If you try to create a template without doing the following update to the unattend-t.xml file, and if the Connector reboot takes too long, the template creation process will never complete, appearing stuck at 80% until the timeout. If you check the running Virtual Machine Connection, you will see an error message that Windows could not complete the installation. To correct this: From MultiPoint Manager or Hyper-V Manager, shutdown the running template VM. Delete the template .vhd stored in Public Documents\Hyper-V\Virtual hard disks 3. a) Make a backup copy of C:\Program Files\Windows MultiPoint Server\Unattend-t.xml e.g. rename it .bak b) open C:\Program Files\Windows MultiPoint Server\Unattend-t.xml in your favorite text editor. b) find connector in the file c) replace this string (starts with <Path> and ends with </Path>) <Path>powershell -Command &quot;try { $process = Start-Process -FilePath &apos;%Windir%\Temp\Connector\WmsConnector.Exe&apos; -ArgumentList &apos;/Quiet&apos; -PassThru -Wait; } catch { throw &apos;WmsConnector Install Failed&apos;}; exit $process.ExitCode&quot;</Path> with this string <Path>powershell -Command &quot;try { $p = Start-Process -FilePath &apos;%Windir%\Temp\Connector\WmsConnector.Exe&apos; -ArgumentList &apos;/Quiet /NoRestart&apos; -PassThru -Wait; } catch { throw &apos;WmsConnector Install Failed&apos;}; exit $p.ExitCode&quot;</Path> then save the file again as Unattend-t.xml d) Proceed with Create and Customize virtual desktop template, and Create virtual desktop station as described on our blog at Virtual Desktop Templates Part 1 & Part 2 We continue to investigate why this issue occurs on some machines and not others Issue #2: UR1 was intended to fix an issue creating virtual desktop templates on true UEFI systems, i.e. systems that dont fall back to legacy support for earlier BIOS services. UR1 did not solve the issue. For now we are recommending doing template creation on systems that do fall back to legacy BIOS services. To check: from Device Manager under Disk Drives select your system hard drive. Double click and go to the Volumes tab and click Populate. The Partition Style entry should be Master Boot Record (MBR). If it is GPT you have a UEFI system. We continue to investigate fixing this for UEFI systems.

Hi! We are using Atrust HW (Server and Zero Thin Clients m320) and had also problems creating Virtual Desktop Template on WMS 2012. The problem was, that creation stucked at 80% until timeout. We followed the above instructions and this solves our problem. The Virtual Desktop Template creation is now successful with Windows 7 Ent. and Windows 8 Ent. Thanks for the instructions and hope that MS will create final solution with some UR1 Update for UEFI and non-UEFI systems ASAP. With regards, Uros. UrosL

Thanks for the validation! And yes, we continue to investigate simpler resolutions for both issues. We'll let everyone know.