PLease help me as title

To do a clean install, either boot the Windows 2000 install CD-Rom or setup disks. The set of four install disks can be created from your Windows 2000 CD-Rom; change to the \bootdisk directory on the CD-Rom and execute makeboot.exe (from dos) or makebt32.exe (from 32 bit) and follow the prompts. (Note: If your drive controller is not natively supported then you'll want to boot the Windows 2000 install CD-Rom. Then *F6* very early and very important (at setup is inspecting your system) in the setup to prevent drive controller detection, and select S to specify additional drivers. Then later you'll be prompted to insert the manufacturer supplied Windows 2000 driver for your drive controller in drive "A") Setup inspects your computer's hardware configuration and then begins to install the Setup and driver files. When the Windows 2000 Professional screen appears, press ENTER to set up Windows 2000 Professional. Read the license agreement, and then press the F8 key to accept the terms of the license agreement and continue the installation. When the Windows 2000 Professional Setup screen appears, all the existing partitions and the unpartitioned spaces are listed for each physical hard disk. Use the ARROW keys to select the partitions Press D to delete an existing partition, If you press D to delete an existing partition, you must then press L (or press ENTER, and then press L if it is the System partition) to confirm that you want to delete the partition. Repeat this step for each of the existing partitions When all the partitions are deleted press F3 to exit setup, (to avoid unexpected drive letter assignments with your new install) then restart the pc then when you get to this point in setup again select the unpartitioned space, and then press C to create a new partition and specify the size (if required). Windows will by default use all available space. Be sure to apply SP4 and these two below to your new install before connecting to any network. Internet included. (sasser, msblast)http://download.microsoft.com/download/E/6/A/E6A04295-D2A8-40D0-A0C5-241BFECD095E/W2KSP4_EN.EXEhttp://www.microsoft.com/technet/security/bulletin/MS03-043.mspxhttp://www.microsoft.com/technet/security/bulletin/MS03-049.mspx Then Rollup 1 for Microsoft Windows 2000 Service Pack 4http://www.microsoft.com/downloads/details.aspx?amp;displaylang=en&familyid=B54730CF-8850-4531-B52B-BF28B324C662&displaylang=enandhttp://www.microsoft.com/technet/security/bulletin/MS08-067.mspxRegards, Dave Patrick .... Microsoft Certified Professional Microsoft MVP [Windows]

Hi, You can refer to: Install Windows 2000 Server http://www.petri.co.il/install_windows_2000.htm Important Note: This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites; therefore, Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet. By the way, I recommend that you contact HP to make sure that they have drivers for Windows Server 2000. Best Regards, Vincent Hu