Stopping W2008 from booting to SAN
Server - IBM x3850 x5 7145 AC1
HBAs - QLogic QLE2460
OS - W2008 Ent 64
Storage - DS3400 / EXP3000
When the fiber is plugged into the HBAs the server will not boot up. It tries to go to SAN and fails since the SAN has no boot files/config.
I have tried just about everything I can find and it still times out trying to boot to SAN.
December 2nd, 2010 4:30pm
Do you have an OS installed on DAS? If so, then you may be able to put
in a DVD, bot, select "Repair Your Computer", open a command prompt and
work with bcdedit. Note that you may also need storage drivers as well
during the step where it asks you to identify your Windows installation.
-- Mike Burr
MS Technologies -
Development - *nix
Free Windows Admin Tool Kit Click here and download it now
December 2nd, 2010 5:37pm
OS is on local RAID1 disk, that's where I want to boot to.R
December 3rd, 2010 1:24pm
Hi,
Have you checked the boot sequence in BIOS?
Best Regards,
Vincent Hu
Free Windows Admin Tool Kit Click here and download it now
December 6th, 2010 4:05am