SCOM 2012 Alert - System Center 2012 Virtual Machine Manager VMM Agent Monitored By OpsMgr
Hi everyone!
Just finsihed upgrading VMM 2008 R2 SP1 to VMM 2012 and successfully integrating VMM 2012 with SCOM 2012 (VMM 2012 management pack version 3.0.6019.0). We are now getting the following SCOM alert from all our VMM 2012 managed Hyper-V hosts...
Alert: "The VMM agent status is Not Monitored on [HOST]" - Monitor: "System Center 2012 Virtual Machine Manager VMM Agent Monitored By OpsMgr"
SCOM 2012 agent is installed and working as expected on our Hyper-V hosts.
Any help or guidance would be apprecaited!
Regards,
JJ
June 12th, 2012 6:39pm
Hi
This is a known issue and will be addressed in a future release. If all your agents are already being monitored, for now, a workaround to is to disable the monitor.
thanks,
Chetan
June 12th, 2012 7:21pm
OK, thanks Chetan! :-)
-
Edited by
IM5FOOTNOTHIN
Tuesday, June 12, 2012 8:06 PM
June 12th, 2012 8:05pm
OK, thanks Chetan! :-)
-
Edited by
IM5FOOTNOTHIN
Tuesday, June 12, 2012 8:06 PM
June 12th, 2012 8:05pm
OK, thanks Chetan! :-)
-
Edited by
IM5FOOTNOTHIN
Tuesday, June 12, 2012 8:06 PM
June 12th, 2012 8:05pm
OK, thanks Chetan! :-)
-
Edited by
IM5FOOTNOTHIN
Tuesday, June 12, 2012 8:06 PM
June 12th, 2012 8:05pm
OK, thanks Chetan! :-)
-
Edited by
IM5FOOTNOTHIN
Tuesday, June 12, 2012 8:06 PM
June 12th, 2012 8:05pm
OK, thanks Chetan! :-)
-
Edited by
IM5FOOTNOTHIN
Tuesday, June 12, 2012 8:06 PM
June 12th, 2012 8:05pm
OK, thanks Chetan! :-)
-
Edited by
IM5FOOTNOTHIN
Tuesday, June 12, 2012 8:06 PM
June 12th, 2012 11:05pm
Chetan, I am also having a similar issue with this. Was this fixed in Roll up 1, or is it still broken? I am currently running SCOM 2012 RU1 and VMM 2012 RU1. It appears the issue is that VMM is looking for the FQDN for the Windows Computer
Object, but Clustered resources only get discovered with NetBIOS name (for the Windows Computer Object). I'm not sure why this is, but I haven't been able to get any Cluster Member to discover with FQDN, only NetBIOS. I see this behavior for all
Cluster Members.
July 12th, 2012 6:55pm
Unfortunately, it hasn't been fixed in Upgrade Rollups.
August 6th, 2012 11:06pm
Thanks for info. Any plans to get this fixed in Rollup 3 or SP1?
August 6th, 2012 11:08pm
We get this too.Please fix. Making overrides then having to remember to have to undo later when it is fixed...meh :p
August 20th, 2012 8:53pm
Do you guys still have a problem with this?
I'm running SCOM 2012 SP1 Update Rollup 2 and I'm getting these alerts.
May 14th, 2013 11:56am
No, it has never been fixed that I'm aware of, coming up on a year for this post... :-(
I'm not one to complain but the VMM 2012 management pack is and continues to be riddled with bugs (e.g. this issue as well as broken diagram views just to name a few) none of which were fixed in the SP1 or UR2 updates.
Regards,
JJ
May 14th, 2013 3:08pm
ok, I'm got it working however I get alot of these "The VMM agent status is Not Monitored on ***" alerts often so it seems to be unstable
May 14th, 2013 4:20pm
And guess what?
It's still not fixed in SCOM 2012 R2 / SCVMM 2012 R2.
October 4th, 2013 6:23am
Can confirm too that this is not fixed in 2012 R2 release. Surprised this is still an issue after such a long time.
December 16th, 2013 1:26am
Same problem here.... SCOM 2012 R2 / VMM 2012 R2.
Everything was working fine, but since yesterday, from nowhere, this alerts started showing....
February 4th, 2014 1:46pm
Same issue since CU3 installed on SCOM 2012 R2 and VMM 2012 R2 while agents are running on Hyper-V 2012 R2. On servers running Hyper-V 2012 (not R2) no issues so far...
-
Edited by
PRND
Tuesday, August 19, 2014 5:45 AM
August 19th, 2014 5:42am
Same issue since CU3 installed on SCOM 2012 R2 and VMM 2012 R2 while agents are running on Hyper-V 2012 R2. On servers running Hyper-V 2012 (not R2) no issues so far...
-
Edited by
PRND
Tuesday, August 19, 2014 5:45 AM
August 19th, 2014 5:42am
Same issue since CU3 installed on SCOM 2012 R2 and VMM 2012 R2 while agents are running on Hyper-V 2012 R2. On servers running Hyper-V 2012 (not R2) no issues so far...
-
Edited by
PRND
Tuesday, August 19, 2014 5:45 AM
August 19th, 2014 5:42am
Same issue since CU3 installed on SCOM 2012 R2 and VMM 2012 R2 while agents are running on Hyper-V 2012 R2. On servers running Hyper-V 2012 (not R2) no issues so far...
-
Edited by
PRND
Tuesday, August 19, 2014 5:45 AM
August 19th, 2014 5:42am
Same issue since CU3 installed on SCOM 2012 R2 and VMM 2012 R2 while agents are running on Hyper-V 2012 R2. On servers running Hyper-V 2012 (not R2) no issues so far...
-
Edited by
PRND
Tuesday, August 19, 2014 5:45 AM
August 19th, 2014 5:42am
Same issue since CU3 installed on SCOM 2012 R2 and VMM 2012 R2 while agents are running on Hyper-V 2012 R2. On servers running Hyper-V 2012 (not R2) no issues so far...
-
Edited by
PRND
Tuesday, August 19, 2014 5:45 AM
August 19th, 2014 5:42am
Same issue since CU3 installed on SCOM 2012 R2 and VMM 2012 R2 while agents are running on Hyper-V 2012 R2. On servers running Hyper-V 2012 (not R2) no issues so far...
-
Edited by
PRND
Tuesday, August 19, 2014 5:45 AM
August 19th, 2014 8:42am
Can't help but laugh, 2+ years and going and still no fix. Makes you wonder how Microsoft actually tests their management packs? ...or do they?
August 19th, 2014 3:49pm
Yes, laughing seems to be the only way to cope with it.
I searched the MPs for the monitor's definition.
UnitMonitorType has only Scheduler as DataSource ! So there is no probing , checking...nothing.
And that seems to be the case for most of these monitors.
Who has written the MP ? That is really ridiculous ...
If the other parts are of same quality, I'm thinking of the PRO enabled MPs, ...why should I install the SCVMM 2012 R2 MPs ?
Would be great if a Microsoft engineer could answer.
Btw: This costs us hours (!) to investigate, searching the forums.
August 27th, 2014 11:44am
Actually i have installed the UR3 Release on my Scom 2012 R2 environment and the problem Remains. I have re-searched almost the Ops Mgr forums and no solutions. Only disable the monitor... Just Great...
September 15th, 2014 12:15pm
Still seems to be there with SCOM 2012 R2 UR4....
January 19th, 2015 2:40pm
This has just appeared in my environment after going to UR5
March 3rd, 2015 3:01am
Same here, after UR5 the alerts came. In UR3 no problems. Any fix yet instead of disabling the monitor?
April 20th, 2015 6:24am
I've even tested this in SCOM/SCVMM 2016 TP3 and it still occurs. It is very disappointing that Microsoft doesn't improve their own product integration issues.
September 4th, 2015 2:13pm