Routing and Remote access
Hello sir
I have windows server 2008 in my office I have configured Routing and Remote access services from Add roles. in my office my network is 192.168.2.1.
I have another machine the network of that machine is 192.168.1.2 and windows 7 is installed.
I want to communicate both the machine through Routing and Remote acccess please help me and tell me it is possible.
huz
May 30th, 2012 9:10am
Hi huzefa,
Thanks for posting here.
We need set proper routing entries on router that connects with both two IP segments in order to forward the traffics between them .
So may I know the topologic you reference ? Id assume it is below:
ClientA---(192.168.2.0)---RRAS---(192.168.1.0)ClientB
RRAS is having addresses 192.168.2.1 , 192.168.1.1 its two interfaces.
ClientA is having an address 192.168.2.2
ClientB is having an address 192.168.1.2
The entries we need to add on each host below are below:
RRAS:
192.168.2.0 255.255.255.0 192.168.2.0
192.168.1.0 255.255.255.0 192.168.1.0
ClientA:
192.168.1.0 255.255.255.0 192.168.2.1
ClientB:
192.168.2.0 255.255.255.0 192.168.1.1
Small Office Network
http://technet.microsoft.com/en-us/library/cc776089(WS.10).aspx
Chapter 5 IP Routing
http://technet.microsoft.com/en-us/library/bb727001.aspx#EEAA
We need also to modify firewall policy on Windows Server 2008 or Windows 7 in order to allow the ICMP :
Nobody Can Ping My Computer
http://technet.microsoft.com/en-us/library/cc749323(WS.10).aspx
Thanks.
Tiger LiTiger Li
TechNet Community Support
Free Windows Admin Tool Kit Click here and download it now
June 1st, 2012 2:52am
Hi huzefa,
Thanks for posting here.
We need set proper routing entries on router that connects with both two IP segments in order to forward the traffics between them .
So may I know the topologic you reference ? Id assume it is below:
ClientA---(192.168.2.0)---RRAS---(192.168.1.0)ClientB
RRAS is having addresses 192.168.2.1 , 192.168.1.1 its two interfaces.
ClientA is having an address 192.168.2.2
ClientB is having an address 192.168.1.2
The entries we need to add on each host below are below:
RRAS:
192.168.2.0 255.255.255.0 192.168.2.0
192.168.1.0 255.255.255.0 192.168.1.0
ClientA:
192.168.1.0 255.255.255.0 192.168.2.1
ClientB:
192.168.2.0 255.255.255.0 192.168.1.1
Small Office Network
http://technet.microsoft.com/en-us/library/cc776089(WS.10).aspx
Chapter 5 IP Routing
http://technet.microsoft.com/en-us/library/bb727001.aspx#EEAA
We need also to modify firewall policy on Windows Server 2008 or Windows 7 in order to allow the ICMP :
Nobody Can Ping My Computer
http://technet.microsoft.com/en-us/library/cc749323(WS.10).aspx
Thanks.
Tiger LiTiger Li
TechNet Community Support
June 1st, 2012 3:03am