Routing and Remote Access Problem in Windows Server 2011 SBS Standard
Hi There,
The company I support just bought a new Hp ML 350 G6 Server with Windows Server 2011 SBS Standard installed. I am configuring the server as new DC and is trying to enable an internet connection. The server has two NICs the first NIC is assigned to connect
to LAN and the second is connected to a router, and the router is connect to the ISP Broadband modem. When I start configuration through SBS Console it tests the connection with the router and sets the second NIC active and disables the First NIC. So I started
to configure manually to use the windows Routing and Remote access service. I have gone through the wizard and finished the setup. But when I see the IP routing Table under IP4, Static IP section, the gateway assigned is 0.0.0.0 in all network addresses. I
have tried to create static IP Routing but it didn't work. When I configure client computer they can not access internet but they can join the Domain and access other resources fine. I have tried to Add a NAT routing protocol to the IP4 section in the routing
and remote access interface but only DHCP Relay Agent is available in the new protocol list. Any one who can help I really appreciate.
Rgds
Beniam KebedeRGDS Beniam Kebede
May 2nd, 2012 8:38am
Hello,
For SBS questions, ask them here: http://social.technet.microsoft.com/Forums/en-US/category/sbsserver
For RRAS questions, ask them here: http://social.technet.microsoft.com/Forums/en-US/winserverNIS/threads
This
posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Microsoft
Student Partner 2010 / 2011
Microsoft
Certified Professional
Microsoft
Certified Systems Administrator: Security
Microsoft
Certified Systems Engineer: Security
Microsoft
Certified Technology Specialist: Windows Server 2008 Active Directory, Configuration
Microsoft
Certified Technology Specialist: Windows Server 2008 Network Infrastructure, Configuration
Microsoft
Certified Technology Specialist: Windows Server 2008 Applications Infrastructure, Configuration
Microsoft
Certified Technology Specialist: Windows 7, Configuring
Microsoft
Certified Technology Specialist: Designing and Providing Volume Licensing Solutions to Large Organizations
Microsoft
Certified IT Professional: Enterprise Administrator
Microsoft Certified IT Professional: Server Administrator
Microsoft Certified Trainer
Free Windows Admin Tool Kit Click here and download it now
May 2nd, 2012 8:49am
Please understand that this forum is related to solve the Windows 2008 general issues and the above post mentioned is more specific to SBS 2011 Server which is a complete different product, so Microsoft has formed a separate forum to discuss SBS
related issues, for more assistance and help you can post your query in the below mentioned link
http://social.technet.microsoft.com/Forums/en-GB/smallbusinessserver/threadshttp://www.arabitpro.com
May 2nd, 2012 9:25am
Unlinke SBS 2003 supports 2 NICs, SBS 2011 allow only one NIC.
http://blogs.technet.com/b/sbs/archive/2008/09/16/sbs-2008-supported-networking-topology.aspx
For SBS queries, post here.
http://social.technet.microsoft.com/Forums/en-US/smallbusinessserver/threads
Thanks
Free Windows Admin Tool Kit Click here and download it now
May 2nd, 2012 9:52am
Please understand that this forum is related to solve the Windows 2008 general issues and the above post mentioned is more specific to SBS 2011 Server which is a complete different product, so Microsoft has formed a separate forum to discuss SBS
related issues, for more assistance and help you can post your query in the below mentioned link
http://social.technet.microsoft.com/Forums/en-GB/smallbusinessserver/threadshttp://www.arabitpro.com
May 2nd, 2012 4:16pm
Thanks, I will post the question of SBS thread.RGDS Beniam Kebede
Free Windows Admin Tool Kit Click here and download it now
May 4th, 2012 2:34am