NLB on Windows 2008
Hi All, Below is my present NLB seupNode1 Pub InterfaceIP:192.168.1.110/24GW: 192.168.1.1 NLB InterfaceIP:192.168.1.109/24GW:Node2Pub Interface IP:192.168.1.112/24GW: 192.168.1.1NLB InterfaceIP: 192.168.1.111/24GW:NLB In Unicase modeMy NLB IP is 192.168.1.113I have endabled the forword=enabled on the NLB NICI have used the NLB IP to configure an Incoming connector as described in the MSexchange.org. We have tested to configure the forwarding=enabled and that is ok for ping etc. But web clients to the Owa page with ssl notice that the answer is from the wrong NIC. I was expecting the reply from 192.168.1.110 or 112 as they are registed in the DNS. But we are getting the reply from the 192.168.1.111 and 109 (which are dedicated IPs on the NLB NIC).swamy
December 18th, 2009 4:07pm

This topic is archived. No further replies will be accepted.

Other recent topics Other recent topics