Hi

I have updated from MDT 2010 and ADK 2.0 (for windows 7) to MDT 2012/13 and ADK 8/8.1 (have tested both), I then generate new Boot images by updating the Deployment Share in MDT, I then add the boot wim into WDS and get the following error.

"RECOVERY Your PC needs to be repaired. The boot configuration data for your PC is missing or contains error. File: \boot\bcd Error Code: 0xc000000f

You'll need to use the recovery tools on your installation media. If you dont have any installation media (Like a disc or USB device) contact your system administrator or PC Manufacturer.

Although burning the iso that is generated through MDT works and connects to the deployment share as expected.

The Server has 2008 r2 installed, although I have tried building a new server with 2012 R2 on to test with, but get the same error.

DHCP is hosted separately, I have also been through this thread

https://social.technet.microsoft.com/Forums/windowsserver/en-US/a164b948-1778-42bd-8d77-9cef1ca70866/image-capture-boot-image-fails-with-0xc000000f?forum=winserversetup

with a similar error but no luck.

Thanks

Hi,

I check the old thread and some cases related to that thread. Here are 2 suggestions provided by Microsoft. Please see if it could help:

Use Microsoft Deployment Toolkit 2013 to run sysprep and capture.  

or

Create capture image on Windows Server 2008 R2 WDS and then import the image to Windows Server 2012 R2 WDS.