Hi,

Is any way to monitor the System Hardware Enclosure (Chesis) through SNMP , because MP is not available  from SCOM 2012 R2

what are the required things to monitor any device based on SNMP and without MP..

I want bto monitor the System Enclosure FAN including Cooling, UPS etc.. from SCOM 201

1) make sure that the device has snmp probe enabled
2) using discovery wizard to add this hardware device into SCOm monitoring
3) consulate hardware verdor for Cooling, UPS etc value OID value
4) Create corresponding SNMP rule/monitor in monitoring hardware device
Roger

Hi Roger,

thanks for your reply..please correct me if am wrong.

1. I need to configure SCOM Management Server IP and port-5723 in Device`s SNMP Trap.

2. I have to use the Network Discovery for monitoring this.

Also, What i have to with Cooling, UPS etc value OID value , where i have to use these hardware details..?

Can you please refer some links for SNMP Rules and Monitors.

Hi,

Port 161 and 162. Please check firewall settings here:

Preparing your environment for System Center 2012 R2 Operations Manager

https://technet.microsoft.com/en-us/library/dn249696.aspx?f=255&MSPPError=-2147217396

Yes, Network Discovery for monitoring

SCOM 2012 - Network Monitoring Magic!

http://kevingreeneitblog.blogspot.dk/2012/01/scom-2012-network-monitoring-magic.html

Hi

You might want to try the http://www.jalasoft.com/xian/networkmanager solution which extends the network monitoring capabilities of SCOM and you could easily add your device using this Framework.

Cheers,

Stefan

Hi Stefan,

thanks for your reply. 

I am looking for your guide /Sheet that help me to understood the Data Sources of All SCOM 2012 R2 Dashboard with its Widgets..  I have gone through below link , please share such Article that you post to SCOM Team Blog , as i am unable to find it..

http://stefanroth.net/2013/09/25/quick-post-scom-2012-where-does-widget-data-come-from/