How to fix Gpresult error message
When i type Gpresult in cmd i the following error message: c:\> Gpresult ERROR Invalid Namespace how to fix that?
July 11th, 2012 4:14pm

Hi, check that your DNS is configured properly "use NSLOOKUP" also verify that you don't have issue in your network connection and check the event log if there is an error related to this problem .Oussama Oueslati | System Engineer | vNext Consulting
Free Windows Admin Tool Kit Click here and download it now
July 11th, 2012 9:39pm

How to use nslookup ? what are the things i should look at the result in the nslookup command? C:\>nslookup *** Can't find server name for address 192.168.2.110: Non-existent domain *** Default servers are not available Default Server: UnKnown Address: 192.168.2.110
July 12th, 2012 12:18am

How to use nslookup? What are the things i should look at the result of the nslookup command in cmd? C:\>nslookup *** Can't find server name for address 192.168.2.110: Non-existent domain *** Default servers are not available Default Server: UnKnown Address: 192.168.2.110
Free Windows Admin Tool Kit Click here and download it now
July 12th, 2012 12:22am

Hello, please post an unedited ipconfig /all from the DC/DNS server and the workstation with the error. Is any GPO configured that may disable the processing on the domain machines?Best regards Meinolf Weber MVP, MCP, MCTS Microsoft MVP - Directory Services My Blog: http://msmvps.com/blogs/mweber/ Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
July 12th, 2012 3:04am

From NSLOOKUP commandline it is clear that your DNS is misconfigured. Please add the reverse record of your DNS server in Reverse lookup zone. Regarding NSLOOKUp, It is a tool which is used to check the DNS settings . Refer below link to understand NSLOOKUP command line http://www.windowsnetworking.com/articles_tutorials/using-nslookup-dns-server-diagnosis.html http://technet.microsoft.com/en-us/library/aa997324(v=exchg.65).aspx Regards, _Prashant_MCSA|MCITP SA|Microsoft Exchange 2003 Blog - http://prashant1987.wordpress.com Disclaimer: This posting is provided AS-IS with no warranties/guarantees and confers no rights.
Free Windows Admin Tool Kit Click here and download it now
July 12th, 2012 3:43am

if you are using dynamic addressing, configure your DHCP server/service to alocate for DNS ip address the IP for your Domain Controller/DNS. Please post an ipconfig /all from domain controller/DNS as requested.MCTS - Please remember to click Mark as Answer on the post that helps you, and to click Unmark as Answer if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. http://mariusene.wordpress.com/
July 12th, 2012 4:48am

I don't think so, i didn't make any changes after installing windows xp pro. When i typed nslookup in cmd i receive this error message: C:\>nslookup *** Can't find server name for address 192.168.2.110: Non-existent domain *** Default servers are not available Default Server: UnKnown Address: 192.168.2.110
Free Windows Admin Tool Kit Click here and download it now
July 13th, 2012 10:47pm

Actually i did this command from windows xp.
July 13th, 2012 10:48pm

Hi, Please refer KB article Hope this help you. Thanks. Mohammed Imtiyaz Ali
Free Windows Admin Tool Kit Click here and download it now
July 14th, 2012 1:30am

When i type Gpresult in cmd i the following error message: c:\> Gpresult ERROR Invalid Namespace how to fix that? Seems it is a WMI issue, have you configured any script using GPO?. I suggest you try to repair XP machine WMI once and check for the difference. Regards, Ravikumar P
July 14th, 2012 9:19am

Hi Ravikumar have you configured any script using GPO? No there's no setting changed to the group policy object. After registered XP machine WMI? C:\>gpresult ERROR: The dependency service or group failed to start. Can't start WMI in service.msc? --------------------------- Services --------------------------- Could not start the Windows Management Instrumentation service on Local Computer. Error 1068: The dependency service or group failed to start. --------------------------- OK --------------------------- There's no Dependency tab none of the services inside the services.msc.
Free Windows Admin Tool Kit Click here and download it now
July 14th, 2012 1:20pm

I still couldn't figure out how to fix the problem after finished too read the links that you provided, but thanks anyway hey.
July 14th, 2012 1:28pm

WMI service will start automatically when you reboot XP machine. So do this try once and check it again.Regards, Ravikumar P
Free Windows Admin Tool Kit Click here and download it now
July 15th, 2012 6:19pm

Hi, When try to access to "services.msc" is there any error that's showing, I suggest that you take look at this link it can help you: http://www.completepcpedia.com/fix_error_1075_dependency_service_marked_deletion.html Oussama Oueslati | System Engineer | vNext Consulting
July 16th, 2012 4:51am

When try to access to "services.msc" is there any error that's showing, I suggest that you take look at this link it can help you : I can access to services.msc without error message but if i want to start the WMI service the following error message: Before register windows xp WMI c:\> Gpresult ERROR Invalid Namespace Ater register windows xp WMI c\>gpresult ERROR: The dependency service or group failed to start. I also have tried the link that you provided is not working too.
Free Windows Admin Tool Kit Click here and download it now
July 18th, 2012 11:58pm

This topic is archived. No further replies will be accepted.

Other recent topics Other recent topics