Error while updating Group Policy
Hello All,
I get the below error while updating the group policy on the user machin.
C:\Users\905288>gpupdate /force
Updating Policy...
User Policy update has completed successfully.
The following warnings were encountered during user policy processing:
Windows failed to apply the Internet Explorer Zonemapping settings. Internet Exp
lorer Zonemapping settings might have its own log file. Please click on the "Mor
e information" link.
Computer Policy update has completed successfully.
For more detailed information, review the event log or run GPRESULT /H GPReport.
html from the command line to access information about Group Policy results.
Is there a way I can find which group policy is causing this issue?
February 10th, 2015 5:21am
> Is there a way I can find which group policy is causing this issue?
Yes :)
dsquery * -filter
"(&(objectclass=grouppolicycontainer)(gpcuserextensionnames=*4CFB60C1-FAA6-47f1-89AA-0B18730C9FD3*))"
-attr displayname
February 10th, 2015 6:10am
Run "gpresult /h c:\gpresult.html" and post the result.
Thanks,
Umesh.S.K
February 11th, 2015 6:41am
Hi,
I believe it works if you put ....)(cn=*4CFB60C1-FAA6-47f1-89AA-0B18730C9FD3*))" as well.
Regards,
Calin
February 11th, 2015 7:03am
> I believe it works if you put
> ....)(cn=*4CFB60C1-FAA6-47f1-89AA-0B18730C9FD3*))" as well.
No. This GUID is the CSE GUID for IE Zonemapping, and it is listed in
the gPCUserExtensionNames attribute as soon as the GPO contains zone
mappings. It has nothing to do with the CN of the GPO or with the (AD
internal) objectGUID attribute :)
February 11th, 2015 7:42am
Hi,
where should I run this command?
dsquery * -filter
"(&(objectclass=grouppolicycontainer)(gpcuserextensionnames=*4CFB60C1-FAA6-47f1-89AA-0B18730C9FD3*))"
On user machin or server?
And just to update its on all the machin in the domain.
Regards,
Suman Rout
February 11th, 2015 8:25am
Hi All,
Thanks I found the Group policy that is causing the issue.
Now I am not sure what is causing the problem in that policy. When I try with gpresult /H gpresult.html
I see the below error:
Internet Explorer Zonemapping |
Failed (no data) |
2/10/2015 9:03:34 AM |
Internet Explorer Zonemapping failed due to the error listed below.
The parameter is incorrect.
Additional information may have been logged. Review the Policy Events tab in the console or the application event log for events between 2/10/2015 9:03:34 AM and 2/10/2015 9:03:34 AM.
Is there anything to isolate this issue.
Regards,
Suman Rout
|
|
February 11th, 2015 8:56am
> Thanks I found the Group policy that is causing the issue.
And what's the content of that GPO?
February 11th, 2015 9:44am
This contains the truested sites for the domain users.
And this is applied at user configuration.
February 11th, 2015 10:06am
Can you remove and re-configure IE settings in your GPO?
Thanks,
Umesh.S.K
February 11th, 2015 10:35am
No removing and reconfiguring is not possible.
February 11th, 2015 10:53am
> This contains the truested sites for the domain users.
Dude, we already know that it contains site to zone assignments - you
identified this GPO shortly before :)
What I'm asking for is "WHAT exact site names did you specify here"?
February 11th, 2015 12:04pm
There was about 116 sites added to it. some of them belongs to domain itself and some outside links.
Do you want me to give you those site details as well?
Regards,
Suman Rout
February 12th, 2015 2:46am