Hi.

Can someone help me here?

After enabling RRAS I am not able to ping 127.0.0.1 anymore.

RRAS started:

RRAS stopped:

Route print with RRAS started and stopped:

Hi Tobias,

The loopback test may fail because TCP/IP stack is broken. Maybe we can reset TCP/IP to fix this problem.

We may reset TCP/IP protocol by the following steps:

1. Open cmd
2. At the commend prompt, enter nets int ip reset, press enter
3. Restart the computer.

Besides, you have to sign in as "administrator " to reset it. 

If you want to learn more about how to reset TCP/IP, you can click the following link:

https://support.microsoft.com/en-us/kb/299357

Best Regards,

Anne He

I already tryed this, but that not solve the problem.

Thanks.

Hi Tobias, 

I have tested it in my lab for a long time by changing the configurations of RRAS, however, it is pity that the problem as you described didnt occur.

Does this issue occur at the beginning of the point that you set up RRAS, or occur after changing some configurations?

You may check the status of the "network interfaces" in the RRAS. Does the "Loopback interface" is "enabled"?

If it is possible, you may disable the routing and remote access, and configure it again,to see if the problem still exits. 

Best Regards,

Anne He