Im trying to setup Azure Site Recovery on-premise hyper-v to Azure. I have successfully configured the Hyper-V Sites and installed the provider with the registration key. Both servers show green. I see my hyper-v server on the server tab.

The issue occurred when Im moving to the next step creating a Protection Group. When click on the create new protection group Im getting the error saying "An error occurred while retrieving the list of servers".

 

I had this error also yesterday and I tried to delete the sites, vault and create everything again. I used the unregister scripted

https://msdn.microsoft.com/en-us/library/azure/dn903160.aspx?f=255&MSPPError=-2147217396

Still I got the error today again.

I really dont understand what Im doing wrong.

Ps. I followed this guide  

http://www.ms4u.info/2014/12/configure-azure-site-recovery-asr.html

• Edited by MR_Alexander Wednesday, April 22, 2015 9:44 AM

Hello All,

We found this to be an issue in our older Microsoft Azure Site Recovery Provider installer. We have released a new patch for the same. Please download the version 4.6.792 from the link on the Azure Portal or directly from Download Center link @ http://download.microsoft.com/download/3/0/F/30F079B9-55D1-4C58-9A06-79772A6F5BAD/AzureSiteRecoveryProvider.exe

If you are already on V 4.6.792 and still hit this issue please email post back on this thread so that I can get back in touch with you.

Regards,

Anoop KV

• Proposed as answer by Anoop KV(MSFT)Microsoft employee Monday, April 27, 2015 6:01 AM
• Marked as answer by MR_Alexander Tuesday, April 28, 2015 10:20 AM
• Unmarked as answer by MR_Alexander Tuesday, April 28, 2015 10:21 AM
• Marked as answer by MR_Alexander Tuesday, April 28, 2015 12:37 PM

I found the solutions. I made a ticket with Microsoft and we found the problem. There was a "#" in the name of my virtual network switch from my hyper-v server. When I removed the # in the name and restarted the services, I could make the protection group.

• Edited by MR_Alexander Tuesday, April 28, 2015 8:49 AM
• Proposed as answer by Nick_E_Carter Tuesday, April 28, 2015 9:09 AM
• Marked as answer by MR_Alexander Tuesday, April 28, 2015 10:21 AM

Your welcome, glade I could help you out. I'm kind of stuck myself with site-to site vpn part. I made the posted here with all the details.

https://social.msdn.microsoft.com/Forums/en-US/4f981cda-52ea-41e9-b9e7-4c34bb7367b8/need-help-to-configure-a-vpn-connection-to-an-azure?forum=WAVirtualMachinesVirtualNetwork

I want to make a planned failover and connect the network with the virtual machines. Somehow the vpn connection fails on phase 2.

Nvm, I fixed the problem with the site-to-site VPN. I made a mistake with the ACL config.

• Edited by MR_Alexander 16 hours 59 minutes ago

Your welcome, glade I could help you out. I'm kind of stuck myself with site-to site vpn part. I made the posted here with all the details.

https://social.msdn.microsoft.com/Forums/en-US/4f981cda-52ea-41e9-b9e7-4c34bb7367b8/need-help-to-configure-a-vpn-connection-to-an-azure?forum=WAVirtualMachinesVirtualNetwork

I want to make a planned failover and connect the network with the virtual machines. Somehow the vpn connection fails on phase 2.

Nvm, I fixed the problem with the site-to-site VPN. I made a mistake with the ACL config.

• Edited by MR_Alexander 17 hours 3 minutes ago

Your welcome, glade I could help you out. I'm kind of stuck myself with site-to site vpn part. I made the posted here with all the details.

https://social.msdn.microsoft.com/Forums/en-US/4f981cda-52ea-41e9-b9e7-4c34bb7367b8/need-help-to-configure-a-vpn-connection-to-an-azure?forum=WAVirtualMachinesVirtualNetwork

I want to make a planned failover and connect the network with the virtual machines. Somehow the vpn connection fails on phase 2.

Nvm, I fixed the problem with the site-to-site VPN. I made a mistake with the ACL config.

• Edited by MR_Alexander Thursday, May 07, 2015 2:14 PM

I have a similar issue creating a Protection Group.  The html on the page is messed up and fails every time I try to create the protection group. It appears the same in IE 11 and Chrome 42.0.2311.90.

When I click through the screens to create the Protection Group, it just comes back saying it failed.

I am on version 4.6.792 of recovery provider.

• Edited by oscoosco Tuesday, April 28, 2015 5:11 PM

Hi Oleksandr ,

With error do you get, the same I got in the first posted or the one from oscoosco?

Regards,

Alexander

• Edited by MR_Alexander 17 hours 3 minutes ago

Hi Oleksandr ,

With error do you get, the same I got in the first posted or the one from oscoosco?

Regards,

Alexander

• Edited by MR_Alexander 16 hours 59 minutes ago

Hi Oleksandr ,

With error do you get, the same I got in the first posted or the one from oscoosco?

Regards,

Alexander

• Edited by MR_Alexander Thursday, May 07, 2015 2:14 PM

I had this trouble to. 

I had virtual switch name "Intel(R) PRO/1000 MT Network Connection". When i removed brackets and slash and restarted Hyper-V host, the error was gone.

I had this trouble to. 

I had virtual switch name "Intel(R) PRO/1000 MT Network Connection". When i removed brackets and slash and restarted Hyper-V host, the error was gone.

Hi _DeV1L_,

I was skeptical but what you suggested worked. Once I removed the "/" from the virtual switch name and restarted the Hyper-V host it worked on Azure.

Thanks for the help!

John