I have a Windows 2008 server that is not a member of a domain. I am able to access shares from a Windows 7 computer but not from an XP computer. On the server I get the error below. I know I am using the correct password. Is there some setting I need to flip on the 2008 server? (I removed machine names and IP's) Log Name: Security Source: Microsoft-Windows-Security-Auditing Date: 10/5/2010 5:17:32 AM Event ID: 4625 Task Category: Logon Level: Information Keywords: Audit Failure User: N/A Computer: XXXX Description: An account failed to log on. Subject: Security ID: NULL SID Account Name: - Account Domain: - Logon ID: 0x0 Logon Type: 3 Account For Which Logon Failed: Security ID: NULL SID Account Name: XXX Account Domain: xxx Failure Information: Failure Reason: Unknown user name or bad password. Status: 0xc000006d Sub Status: 0xc000006a Process Information: Caller Process ID: 0x0 Caller Process Name: - Network Information: Workstation Name: XXX Source Network Address: XXX Source Port: 41376 Detailed Authentication Information: Logon Process: NtLmSsp Authentication Package: NTLM Transited Services: - Package Name (NTLM only): - Key Length: 0 This event is generated when a logon request fails. It is generated on the computer where access was attempted. The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe. The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network). The Process Information fields indicate which account and process on the system requested the logon. The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases. The authentication information fields provide detailed information about this specific logon request. - Transited services indicate which intermediate services have participated in this logon request. - Package name indicates which sub-protocol was used among the NTLM protocols. - Key length indicates the length of the generated session key. This will be 0 if no session key was requested. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-a5ba-3e3b0328c30d}" /> <EventID>4625</EventID> <Version>0</Version> <Level>0</Level> <Task>12544</Task> <Opcode>0</Opcode> <Keywords>0x8010000000000000</Keywords> <TimeCreated SystemTime="2010-10-05T09:17:32.111Z" /> <EventRecordID>2627705</EventRecordID> <Correlation /> <Execution ProcessID="636" ThreadID="732" /> <Channel>Security</Channel> <Computer>MBOPAR-MAIL1</Computer> <Security /> </System> <EventData> <Data Name="SubjectUserSid">S-1-0-0</Data> <Data Name="SubjectUserName">-</Data> <Data Name="SubjectDomainName">-</Data> <Data Name="SubjectLogonId">0x0</Data> <Data Name="TargetUserSid">S-1-0-0</Data> <Data Name="TargetUserName">dbadmin</Data> <Data Name="TargetDomainName">mbopar-mail1</Data> <Data Name="Status">0xc000006d</Data> <Data Name="FailureReason">%%2313</Data> <Data Name="SubStatus">0xc000006a</Data> <Data Name="LogonType">3</Data> <Data Name="LogonProcessName">NtLmSsp </Data> <Data Name="AuthenticationPackageName">NTLM</Data> <Data Name="WorkstationName">XXXX</Data> <Data Name="TransmittedServices">-</Data> <Data Name="LmPackageName">-</Data> <Data Name="KeyLength">0</Data> <Data Name="ProcessId">0x0</Data> <Data Name="ProcessName">-</Data> <Data Name="IpAddress">XXXX</Data> <Data Name="IpPort">41376</Data> </EventData> </Event>-Ben

seems to be smb share problem. Please disable the smb 2.0 on windows 2008 and see if it works When a Windows Server 2008/Vista "client" connects to a Windows Server 2008/Vista "server", SMB 2.0 is used. When a Windows Server 2008/Vista "client" connects to a Windows 2000/XP/2003 "server", SMB 1.0 is used. When a Windows 2000/XP/2003 "client" connects to a Windows Server 2008/Vista "server", SMB 1.0 is used. When a Windows 2000/XP/2003 "client" connects to a Windows 2000/XP/2003 "server", SMB 1.0 is used. http://www.petri.co.il/how-to-disable-smb-2-on-windows-vista-or-server-2008.htmhttp://www.virmansec.com/blogs/skhairuddin