1058 error with Group Policy on Domain Controller (Network Steve Forum)

Wanted: Network Administrators

See great job listings on the jobs Page

1058 error with Group Policy on Domain Controller

There seems to be a sysvol replicaton problem and one of DC is not getting the updated sysvol.
You can try forcing the replicaiton between the domain controllers

http://www.windowstricks.in/2009/11/force-sysvol-replication.html

IF nothing works , I would request you to setup blurflg on DC where you are facing this.

Details are there in Below Techwiki article

http://social.technet.microsoft.com/wiki/contents/articles/8548.sysvol-and-netlogon-share-importance-in-active-directory.aspx

http://eventid.net/display.asp?eventid=13508&eventno=349&source=NtFrs&phase=1

Regards,
_Prashant_MCSA|MCITP SA|Microsoft Exchange 2003 Blog -
http://prashant1987.wordpress.com
Disclaimer: This posting is provided AS-IS with no warranties/guarantees and confers no rights.

There is an amazing pack of free network admin tools. click here to download it

May 31st, 2012 6:47am

Looked through most of the other errors here, and I'm getting a 1058 error while processing group policy on a domain controller. The weird thing is when i go to the GPO in question, it doesn't exist. I can't continue any troubleshooting steps because I do
not know why it is not there. How can the GPO be trying to process a group policy that doesn't exist on the sysvol? Here's the error codes anyways:

The processing of Group Policy failed. Windows attempted to read the file \\*.*\SysVol\*.*\Policies\{0DCE1F65-A5C6-470B-9E16-1EFF02EDFE23}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event
is resolved. This issue may be transient and could be caused by one or more of the following:

a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).

c) The Distributed File System (DFS) client has been disabled.

SupportInfo1
4

SupportInfo2
816

ProcessingMode
0

ProcessingTimeInMilliseconds
655

ErrorCode
3

ErrorDescription
The system cannot find the path specified.

DCName
rbpdc03.*.*

GPOCNName
cn={0DCE1F65-A5C6-470B-9E16-1EFF02EDFE23},cn=policies,cn=system,DC=*,DC=*

FilePath
\\*.*\SysVol\*.*\Policies\{0DCE1F65-A5C6-470B-9E16-1EFF02EDFE23}\gpt.ini

There is an amazing pack of free network admin tools. click here to download it

May 31st, 2012 6:47am

Hello,
this is too less information to get you some help, please upload the following files if the already given articles doesn't help:
ipconfig /all >c:\ipconfig.txt [all DCs]
dcdiag /v /c /d /e /s:dcname >c:\dcdiag.txt
repadmin /showrepl dc* /verbose /all /intersite >c:\repl.txt ["dc* is a place holder for the starting name of the DCs if they all begin the same (if more then one DC exists)]
dnslint /ad /s "DCipaddress" (
http://support.microsoft.com/kb/321045
)
As the output will become large, DON'T post them into the thread, please use Windows Sky Drive(with open access!)

http://explore.live.com/windows-live-skydrive
and add the link from it here. Also the /e in dcdiag scans the complete forest, so better run it on COB.
Additional post the used OS version incl. SP/patch level.Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog:
http://msmvps.com/blogs/mweber/

Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

There is an amazing pack of free network admin tools. click here to download it

May 31st, 2012 6:50am

There seems to be a sysvol replicaton problem and one of DC is not getting the updated sysvol.
You can try forcing the replicaiton between the domain controllers

http://www.windowstricks.in/2009/11/force-sysvol-replication.html

IF nothing works , I would request you to setup blurflg on DC where you are facing this.

Details are there in Below Techwiki article

http://social.technet.microsoft.com/wiki/contents/articles/8548.sysvol-and-netlogon-share-importance-in-active-directory.aspx

http://eventid.net/display.asp?eventid=13508&eventno=349&source=NtFrs&phase=1

Regards,
_Prashant_MCSA|MCITP SA|Microsoft Exchange 2003 Blog -
http://prashant1987.wordpress.com
Disclaimer: This posting is provided AS-IS with no warranties/guarantees and confers no rights.

Need to support users over the internet? click here try our remote control online beta

May 31st, 2012 6:54am

Hello,
this is too less information to get you some help, please upload the following files if the already given articles doesn't help:
ipconfig /all >c:\ipconfig.txt [all DCs]
dcdiag /v /c /d /e /s:dcname >c:\dcdiag.txt
repadmin /showrepl dc* /verbose /all /intersite >c:\repl.txt ["dc* is a place holder for the starting name of the DCs if they all begin the same (if more then one DC exists)]
dnslint /ad /s "DCipaddress" (
http://support.microsoft.com/kb/321045
)
As the output will become large, DON'T post them into the thread, please use Windows Sky Drive(with open access!)

http://explore.live.com/windows-live-skydrive
and add the link from it here. Also the /e in dcdiag scans the complete forest, so better run it on COB.
Additional post the used OS version incl. SP/patch level.Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog:
http://msmvps.com/blogs/mweber/

Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

Need to support users over the internet? click here try our remote control online beta

May 31st, 2012 6:56am

Hello,
It seems here that you are issues when replicating SYSVOL.
Please proceed like that:

Identify the DC with the correct copy of SYSVOL folderUse Burflags to reset the replication of SYSVOL folder:
http://support.microsoft.com/kb/290762

This
posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Microsoft
Student Partner 2010 / 2011
Microsoft
Certified Professional
Microsoft
Certified Systems Administrator: Security
Microsoft
Certified Systems Engineer: Security
Microsoft
Certified Technology Specialist: Windows Server 2008 Active Directory, Configuration
Microsoft
Certified Technology Specialist: Windows Server 2008 Network Infrastructure, Configuration
Microsoft
Certified Technology Specialist: Windows Server 2008 Applications Infrastructure, Configuration
Microsoft
Certified Technology Specialist: Windows 7, Configuring
Microsoft
Certified Technology Specialist: Designing and Providing Volume Licensing Solutions to Large Organizations
Microsoft Certified IT Professional: Enterprise Administrator
Microsoft Certified IT Professional: Server Administrator
Microsoft Certified Trainer

Need to support users over the internet? click here try our remote control online beta

May 31st, 2012 7:12am

May 31st, 2012 7:19am

Hi,

As this thread has been quiet for a while, we will mark it as Answered as the information provided should be helpful. If you need further help, please feel free to reply this post directly so we will be notified to follow it up. You can also choose to unmark
the answer as you wish.

BTW, wed love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar problems. Thanks for your understanding and efforts.

Best Regards

KevinTechNet Community Support

There is an amazing pack of free network admin tools. click here to download it

June 4th, 2012 12:24am

This topic is archived. No further replies will be accepted.