fig .0.0..

Hi every one

the top chart is my network diagram 

i can receive email from outside such as gmail/yahoo/live and .. but while i want to send and email i cant

let me put some explanation 

i have 2 domain 

1- irik.local which is hosted on my server room and it is active directory 2012 with faile over cluster (192.168.77.1&2) which is prive 

2- irik.ir   which is my website domain name and it is public

i also configure a Public DNS server (192.168.83.10) and redirect the NS's of my public domain to my router public IP and the NAT the public IP for UDP & TCP 53 to my public DNS server which is pon my DMZ

here you can find my Public DNS configuration :

fig 0.

i also install edge transport server on my DMZ with IP address of 192.168.83.100 and put some fire wall policy for that

fig 1 .....

in my  private network i install 2 Mail box server which one of them had CAS roll too (192.168.77.6)

i also register my ip address in spamhuse 

after trying to send an email here is the header :

Original message headers:
Received: from mail-02.irik.local (5.160.171.10) by IRIK-EDGE-01.irik.ir
 (192.168.83.100) with Microsoft SMTP Server (TLS) id 15.0.847.32; Sat, 25 Apr
 2015 00:39:51 -0700
Received: from mail-01.irik.local (192.168.77.6) by mail-02.irik.local
 (192.168.77.7) with Microsoft SMTP Server (TLS) id 15.0.847.32; Sat, 25 Apr
 2015 00:39:45 -0700
Received: from mail-01.irik.local ([192.168.76.6]) by mail-01.irik.local
 ([192.168.76.6]) with mapi id 15.00.0847.030; Sat, 25 Apr 2015 00:39:27 -0700
From: Administrator <Administrator@irik.ir>
To: "a.h.modjarrad@gmail.com" <a.h.modjarrad@gmail.com>
Subject: ptr
Thread-Topic: ptr
Thread-Index: AQHQfyrjN2Cyu6vMzkWbBKzxgITZWA==
Date: Sat, 25 Apr 2015 07:39:26 +0000
Message-ID: <c77d5ac2e8c1489590eb520cff3f4402@mail-01.irik.local>
Accept-Language: en-US
Content-Language: en-US
X-MS-Has-Attach:
X-MS-TNEF-Correlator:
x-originating-ip: [192.168.77.221]
Content-Type: multipart/alternative;
       boundary="_000_c77d5ac2e8c1489590eb520cff3f4402mail01iriklocal_"
MIME-Version: 1.0
Return-Path: Administrator@irik.ir

f

i configured my exchange mailbox and client access like this :

fig 2....

and also configured an email address policy for y public domain 

fig 3

and the send connectors are like this :

fig 4....

and 

fig 5....

i dont know where is my problem which i cant send an email to outsite

Your figures didn't come through, which is probably fine since you've posted way too much of the wrong information.

Do you have a send connector?  How is it configured?

Get-SendConnector | FL

Don't post a picture, post the text.  Is it configured to use a smart host?  If so, can you send message to a smart host?  Observe the blank line and the line with a period by itself and enter them as shown.  Do this in a command window on the Exchange server that is the source transport server in the send connector.

telnet smarthost.domain.com 25
helo you.company.com
mail from:you@yourdomain.com
rcpt to:someone.else@theirdomain.com
data
subject:This is a test

This is a test.
.
quit

If you don't have a smart host, find a host by using NSLOOKUP to find an MX record for someone and send to their mail host.  A good candidate for this is the one that rejected your message.  Post what you get back if you can't figure out what's going on.

Having suggested all that, I will speculate that you are blacklisted or are on an IP range that is blacklisted.  Taking the above steps will help confirm that if I'm right.

Hi,

Please also checked if whether the sender servers IP address is included in black list. ( http://mxtoolbox.com/ )

Documents for reference

Create a Send connector for email sent to the Internet

https://technet.microsoft.com/en-us/library/jj657457%28v=exchg.150%29.aspx?f=255&MSPPError=-2147217396

Create a Send connector to route outbound email through a smart host

https://technet.microsoft.com/en-us/library/jj673059(v=exchg.150).aspx

Best Regards.