On Fri, 30 Mar 2012 22:26:13 +0000, tconners wrote:

>
>
>Normaly I am in an environment where the SMTP settings are just provided for me. I now do not have that luxury.

>
>That being said I walked through the default setup for exchange 2012. I can send mail back and forth with outlook to all my domain users " I created mailboxes for them nothing else! " I now want to use my SQL RS and leverage mail with reports in SCCM
2007.
>
>My Exchange server is named "\\exchange" and the FQDM is "Exchange.Mydomain.com" Of corse thats not the real domain name but you get the just.

>
>What settings do I use in "E-mail SMTP settings" IE: "Sender Address" and "SMTP Server" is the SMTP Server my FQDM of my exchange box?
>
>
>Do I need to configure my exchange server any differently for this use than a typical step by step default install?


I'd create another Receive Connector and allow anonymous users on the
"Permission Groups" tab. As long as the IP address it listens on isn't
exposed to the Internet it's generally safe. You can add another level
of protection by restricting the set of IP addresses on the "Network"
tab to only the IP addresses of the machines on your LAN.

---
Rich Matheisen
MCSE+I, Exchange MVP
--- Rich Matheisen MCSE+I, Exchange MVP

Need to support users over the internet? click here try our remote control online beta

On Fri, 30 Mar 2012 23:16:50 +0000, tconners wrote:

>
>
>Here are my Telnet results:
>
>220 Exchange.MyDomain.com Microsoft ESMTP MAIL Service ready at Fri, 30 Mar 2012 16:13:3 -0700 EHLO exchange.Mydomain.com 250-Exchange.MyDomain.com Hello [fe80::c187:a963:d0a9:70cc%11] 250-SIZE 250-PIPELINING 250-DSN 250-ENHANCEDSTATUSCODES 250-AUTH NTLM
250-8BITMIME 250-BINARYMIME 250 CHUNKING AUTH LOGIN 504 5.7.4 Unrecognized authentication type

You can use "LOGIN" if the only authentication type your server
advertises is "NTLM". :-)

---
Rich Matheisen
MCSE+I, Exchange MVP
--- Rich Matheisen MCSE+I, Exchange MVP

Need to support users over the internet? click here try our remote control online beta

On Sat, 31 Mar 2012 03:02:44 +0000, Rich Matheisen [MVP] wrote:

>On Fri, 30 Mar 2012 23:16:50 +0000, tconners wrote: > > >Here are my Telnet results: > >220 Exchange.MyDomain.com Microsoft ESMTP MAIL Service ready at Fri, 30 Mar 2012 16:13:3 -0700 EHLO exchange.Mydomain.com 250-Exchange.MyDomain.com Hello [fe80::c187:a963:d0a9:70cc%11]
250-SIZE 250-PIPELINING 250-DSN 250-ENHANCEDSTATUSCODES 250-AUTH NTLM 250-8BITMIME 250-BINARYMIME 250 CHUNKING AUTH LOGIN 504 5.7.4 Unrecognized authentication type You can use "LOGIN" if the only authentication type your server advertises is "NTLM". :-) ---
Rich Matheisen MCSE+I, Exchange MVP

Hmmm . . . that "can" should, of course, have been "can't". How
embarrassing. :-(

---
Rich Matheisen
MCSE+I, Exchange MVP
--- Rich Matheisen MCSE+I, Exchange MVP

There is an amazing pack of free network admin tools. click here to download it

Normaly I am in an environment where the SMTP settings are just provided for me. I now do not have that luxury.
That being said I walked through the default setup for exchange 2012. I can send mail back and forth with outlook to all my domain users " I created mailboxes for them nothing else! " I now want to use my SQL RS and leverage mail with reports in
SCCM 2007.
My Exchange server is named "\\exchange" and the
FQDM is "Exchange.Mydomain.com" Of
corse
thats not the real domain name but you get the just.
What settings do I use in "E-mail SMTP settings" IE: "Sender Address" and "SMTP Server" is the SMTP Server my
FQDM of my exchange box?

Do I need to configure my exchange server any differently for this use than a typical step by step default install?




tconners

Need to support users over the internet? click here try our remote control online beta

Here are my Telnet results:
220 Exchange.MyDomain.com Microsoft ESMTP MAIL Service ready at Fri, 30 Mar 2012 16:13:3
-0700
EHLO exchange.Mydomain.com
250-Exchange.MyDomain.com Hello [fe80::c187:a963:d0a9:70cc%11]
250-SIZE
250-PIPELINING
250-DSN
250-ENHANCEDSTATUSCODES
250-AUTH NTLM
250-8BITMIME
250-BINARYMIME
250 CHUNKING
AUTH LOGIN
504 5.7.4 Unrecognized authentication typetconners

Need to support users over the internet? click here try our remote control online beta

On Fri, 30 Mar 2012 22:26:13 +0000, tconners wrote:

>
>
>Normaly I am in an environment where the SMTP settings are just provided for me. I now do not have that luxury.

>
>That being said I walked through the default setup for exchange 2012. I can send mail back and forth with outlook to all my domain users " I created mailboxes for them nothing else! " I now want to use my SQL RS and leverage mail with reports in SCCM
2007.
>
>My Exchange server is named "\\exchange" and the FQDM is "Exchange.Mydomain.com" Of corse thats not the real domain name but you get the just.

>
>What settings do I use in "E-mail SMTP settings" IE: "Sender Address" and "SMTP Server" is the SMTP Server my FQDM of my exchange box?
>
>
>Do I need to configure my exchange server any differently for this use than a typical step by step default install?


I'd create another Receive Connector and allow anonymous users on the
"Permission Groups" tab. As long as the IP address it listens on isn't
exposed to the Internet it's generally safe. You can add another level
of protection by restricting the set of IP addresses on the "Network"
tab to only the IP addresses of the machines on your LAN.

---
Rich Matheisen
MCSE+I, Exchange MVP
--- Rich Matheisen MCSE+I, Exchange MVP

There is an amazing pack of free network admin tools. click here to download it

On Fri, 30 Mar 2012 23:16:50 +0000, tconners wrote:

>
>
>Here are my Telnet results:
>
>220 Exchange.MyDomain.com Microsoft ESMTP MAIL Service ready at Fri, 30 Mar 2012 16:13:3 -0700 EHLO exchange.Mydomain.com 250-Exchange.MyDomain.com Hello [fe80::c187:a963:d0a9:70cc%11] 250-SIZE 250-PIPELINING 250-DSN 250-ENHANCEDSTATUSCODES 250-AUTH NTLM
250-8BITMIME 250-BINARYMIME 250 CHUNKING AUTH LOGIN 504 5.7.4 Unrecognized authentication type

You can use "LOGIN" if the only authentication type your server
advertises is "NTLM". :-)

---
Rich Matheisen
MCSE+I, Exchange MVP
--- Rich Matheisen MCSE+I, Exchange MVP

Need to support users over the internet? click here try our remote control online beta

Hi
If it worked, please Mark As Answer
Cheers
Zi Feng


Zi Feng

TechNet Community Support

There is an amazing pack of free network admin tools. click here to download it

That worked! Thanks for your help!tconners

There is an amazing pack of free network admin tools. click here to download it