Hi all,
I have a issue to finishing my migration from Exchange 2010 to Exchange 2013, I have been trying to migrate my Public folders but always after a couple hours, the migration state is failed.
The final error is the following:
FailureCode : -2146233088
FailureType : SourceMailboxAlreadyBeingMovedPermanentException
FailureSide :
Message : Error: Couldn't switch the mailbox into Sync Source mode.
This could be because of one of the following reasons:
Another administrator is currently moving
the mailbox.
The mailbox is locked.
The Microsoft Exchange Mailbox Replication
service (MRS) doesn't have the correct
permissions.
Network errors are preventing MRS from cleanly
closing its session with the
Mailbox server. If this is the case, MRS may continue
to encounter this error for
up to 2 hours - this duration is controlled by the TCP
KeepAlive settings on the
Mailbox server.
Wait for the mailbox to be released before attempting
to move this mailbox again.
So, after seeing this I started to monitoring all process and I realized that after creating hierarchy the process start to fail and keep in StalledDueMailboxlock status, and the error is:
FailureCode :
FailureType :
FailureSide :
Message : Informational: The request has been temporarily postponed because the mailbox is
locked. The Microsoft Exchange Mailbox Replication service
will attempt to continue
processing the request after 2/14/2015 12:38:20 PM.
Finally, digging more into reports of migration I found this:
MapiExceptionNetworkError: MapiExceptionNetworkError: Unable to open entry ID. (hr=0x80040115, ec=6)_x000A_Diagnostic context:_x000A_ Lid: 40487 EMSMDBMT.EcDoRpcExt2 called [length=73]_x000A_ Lid: 44583 EMSMDBMT.EcDoRpcExt2 exception [rpc_status=0x6][latency=0]_x000A_ Lid: 62184 _x000A_ Lid: 16280 dwParam: 0x0 Msg: EEInfo: ComputerName: n/a_x000A_ Lid: 8600 dwParam: 0x0 Msg: EEInfo: ProcessID: 51452_x000A_ Lid: 12696 dwParam: 0x0 Msg: EEInfo: Generation Time: 0415-02-14T14:25:40.9210000Z_x000A_ Lid: 10648 dwParam: 0x0 Msg: EEInfo: Generating component: 2_x000A_ Lid: 14744 dwParam: 0x0 Msg: EEInfo: Status: 6_x000A_ Lid: 9624 dwParam: 0x0 Msg: EEInfo: Detection location: 1741_x000A_ Lid: 13720 dwParam: 0x0 Msg: EEInfo: Flags: 0_x000A_ Lid: 11672 dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 0_x000A_ Lid: 23260 Win32Error: 0x6_x000A_ Lid: 61553 StoreEc: 0x80040115_x000A_ Lid: 52176 ClientVersion: 15.0.1044.25_x000A_ Lid: 50032 ServerVersion: 14.3.181.6_x000A_ Lid: 50128 _x000A_ Lid: 50288 _x000A_ Lid: 23354 StoreEc: 0x80040115_x000A_ Lid: 25913 _x000A_ Lid: 21817 ROP Failure: 0x80040115_x000A_ Lid: 22894 _x000A_ Lid: 24942 StoreEc: 0x80040115
So, would like to know if exist any procedure to migrate/move my Public Folders from Exchange 2010 to 2013 manually, something like Export/Import.
Regards!