Exchange 2003 Management Tools and Windows 7
Has anyone managed to install the Exchange Management tools onto Windows 7?Charles
May 28th, 2009 3:54pm

Charles, http://www.microsoft.com/downloads/details.aspx?familyid=3403d74e-8942-421b-8738-b3664559e46f&displaylang=en Those are the Vista tools, you could give that a try. I haven't heard anything else yet about for Windows 7Mark Morowczynski|MCSE 2003:Messaging, Security|MCITP:ES, SA|MCTS:Windows Mobile Admin|Security+|http://almostdailytech.com
Free Windows Admin Tool Kit Click here and download it now
May 28th, 2009 4:43pm

Charles, http://www.microsoft.com/downloads/details.aspx?familyid=3403d74e-8942-421b-8738-b3664559e46f&displaylang=en Those are the Vista tools, you could give that a try. I haven't heard anything else yet about for Windows 7Mark Morowczynski|MCSE 2003:Messaging, Security|MCITP:ES, SA|MCTS:Windows Mobile Admin|Security+|http://almostdailytech.com
May 28th, 2009 4:43pm

I think we should wait the RTM of Windows 7. Nevertheless, youcould give a try usingExchange System Manager for Windows Vista in Windows 7 RC.
Free Windows Admin Tool Kit Click here and download it now
May 29th, 2009 11:49am

I think we should wait the RTM of Windows 7. Nevertheless, youcould give a try usingExchange System Manager for Windows Vista in Windows 7 RC.
May 29th, 2009 11:49am

just tried too, failed with "this program required windows vista" windows 7 RC.MCSA Messaging
Free Windows Admin Tool Kit Click here and download it now
May 31st, 2009 1:21am

Yea that's what I figured. Have to wait for the official release. Mark Morowczynski|MCSE 2003:Messaging, Security|MCITP:ES, SA|MCTS:Windows Mobile Admin|Security+|http://almostdailytech.com
May 31st, 2009 1:25am

Yea that's what I figured. Have to wait for the official release. Mark Morowczynski|MCSE 2003:Messaging, Security|MCITP:ES, SA|MCTS:Windows Mobile Admin|Security+|http://almostdailytech.com
Free Windows Admin Tool Kit Click here and download it now
May 31st, 2009 1:25am

Hi,You may try to use Application Compatibility Toolkit to circumvent this behaviour. You can download it from here:http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=24da89e9-b581-47b0-b45e-492dd6da2971Regards,Zoltnhttp://www.clamagent.org - Free Antivirus for Exchange http://www.it-pro.hu http://emaildetektiv.hu
May 31st, 2009 7:39am

I believe I just got it working.... I am currently testing the application and will let you know tomorrow after I get it fully tested....Windows 7 RC workstationWindows Server 2003 DomainExchange Server 2003ADUC for Exchange 2003 Management tools......
Free Windows Admin Tool Kit Click here and download it now
June 9th, 2009 12:46am

Well, the test seem to worked out great, no issues or errors when adding users in ADUC....For more details go to http://nwcalc.web44.net/Win7/Will
June 9th, 2009 9:18pm

Awesome man, thanks so much for the hard work on this! I have been looking for something, anything like this so that I can get the exchange tools running. I installed the modified .exe and so far it is working great, thanks!
Free Windows Admin Tool Kit Click here and download it now
June 9th, 2009 11:58pm

Awesome, thanks for the workaround!
June 10th, 2009 3:42pm

Glad you guys found it a plus to use this, please provide some feedback......ThanksWill Dove | MCSA 2003:Security | A+ | Network+ | Security+ |
Free Windows Admin Tool Kit Click here and download it now
July 1st, 2009 4:09pm

excellent, this works for me too.
July 22nd, 2009 2:22am

Grazie mille: va da da dio.Thanks a lot: this works very very well.Michele
Free Windows Admin Tool Kit Click here and download it now
July 31st, 2009 11:12am

Will,Thank you so much for posting this. It really helped me out of a pinch!
August 11th, 2009 4:58pm

Will,Thanks for this - it works perfectly in the full release of Windows 7 (Technet, August, Professional edition). A bit fiddly but I can get on with my job now without RDPing to the exchange server...Andy
Free Windows Admin Tool Kit Click here and download it now
August 11th, 2009 6:22pm

FYI: the Exchange tools for VISTA(noted previously) do not work on W7Ent (full release). Any other suggestions?
August 14th, 2009 7:31pm

Thanks, this worked fine for me on Windows 7 Enterprise RTM.
Free Windows Admin Tool Kit Click here and download it now
August 18th, 2009 6:38am

Thanks to WCDove for that legwork. I am currently installing on Windows 7 RTM. Worked fairly well. Got an error about not having an email program to associate with and it looked like it was going to terminate, but it kept going. (Had opted to not install outlook first per the issues in the PDF file). went into active directory u&C and the exchange functions are present.Like previous posts, now i can get on with my assignment!thanks WCdove!daveJust tried to enter the exchange manager..... it gave me an error with "MMC could not create the snap-in" Any ideas ??
August 18th, 2009 7:21pm

Does this work with a x64 version of windows 7 Ent.?
Free Windows Admin Tool Kit Click here and download it now
August 26th, 2009 11:00pm

I managed to install the ESM for Vista (modified msi) on Windows 7 Pro RTM x64 but can't get the tabs in ADUC. I suppose this is because it is ment to run in a 32bit MMC ? It's a shame because it is the only thing left before I can drop my Windows XP mode... Otherwise the System Manager works fine.
August 31st, 2009 4:55pm

Any word on x64 Exchange management tools yet?
Free Windows Admin Tool Kit Click here and download it now
September 10th, 2009 4:13am

No this will not work with 64bit ver.Will Dove | MCSA 2003:Security | A+ | Network+ | Security+ |
October 9th, 2009 6:12pm

I have not been able to get this to work on 64bit OS.... Not sure why, most be some major changes between 64bit Vista and 64bit Win7Will Dove | MCSA 2003:Security | A+ | Network+ | Security+ |
Free Windows Admin Tool Kit Click here and download it now
October 9th, 2009 6:13pm

Not sure what you did with the install, but it is working great here. you are running 32bit OS correctWill Dove | MCSA 2003:Security | A+ | Network+ | Security+ |
October 9th, 2009 6:14pm

If you are getting the errors you will need to reinstall everything, make sure that you don't have any admin tools open when installing, and unpin ADUC if you have it pinned.Will Dove | MCSA 2003:Security | A+ | Network+ | Security+ |
Free Windows Admin Tool Kit Click here and download it now
October 9th, 2009 6:15pm

If you run a 32Bit its fine but with so many of us running 64Bit this makes it impossible to install unless MS release a 64bit version. RDP into the exchange server and working of that isnt exactly the prefered route. I cannot even setup a remoteapp with the remote desktop server as that is too 64bit.
November 4th, 2009 1:57pm

That works great for the tabs in ADUC, have you managed to get system manager working eg message tracking, view the mail boxes etc? I get a down arrow on the mailboxws and public folders in system manager . . Thanks
Free Windows Admin Tool Kit Click here and download it now
November 16th, 2009 5:07pm

That is fantastic works a treat. well done. Thanks
January 29th, 2010 4:36pm

Hi to all.I am trying to get this working on a Win7 64bit system. Is there any solution for 64bit systems?ESM works, but no tabs in ADUC.
Free Windows Admin Tool Kit Click here and download it now
February 10th, 2010 5:20pm

Download the vista tools from http://www.microsoft.com/downloads/details.aspx?familyid=3403d74e-8942-421b-8738-b3664559e46f&displaylang=en Then run the .msi from an administrator dos window with the following command. MSIEXEC /I ESMVISTA.MSI /QWhen run in silent mode it wont pop up the box saying that this product is only for vista. This allows you to continue the installation.
February 19th, 2010 6:00pm

i have already installed ESM and it works (only the Exchange Manager and not exchange's ADUC shortcut),but it doesn't show any of the exchange tabs in ADUC. In order to achieve that I had to install everything in XP Mode.
Free Windows Admin Tool Kit Click here and download it now
February 19th, 2010 7:47pm

Well, the test seem to worked out great, no issues or errors when adding users in ADUC....For more details go to http://nwcalc.web44.net/Win7/Will WCDove:Thank you for the solution! I tried to edit the .msi table myself using Orca, but was unable to do it correctly. Every time I made an adjustment, it seemed to corrupt the package. Anyway...it took me a little while of playing with it before I realized that you provided the already tweaked .msi for us.Thank you! I can now happily administer my users and email from Windows 7! :)
February 23rd, 2010 12:05am

Windows 7 32bit Enterprise edition, MSIEXEC /I ESMVISTA.MSI /Q worked great for me, thanks robert! (I feel better using something I downloaded from microsoft directly)
Free Windows Admin Tool Kit Click here and download it now
March 4th, 2010 7:43pm

Download the vista tools from http://www.microsoft.com/downloads/details.aspx?familyid=3403d74e-8942-421b-8738-b3664559e46f&displaylang=en Then run the .msi from an administrator dos window with the following command. MSIEXEC /I ESMVISTA.MSI /QWhen run in silent mode it wont pop up the box saying that this product is only for vista. This allows you to continue the installation. Thank you!
March 17th, 2010 11:57pm

Did anyone get it working on Windows 7 x64
Free Windows Admin Tool Kit Click here and download it now
March 19th, 2010 9:31am

That trick didn't work for me (the silent installation i mean). I had to modify the ESMVISTA file by using the ORCA editor and I deleted some entries that I found from searching on the internet that had to do with the version of Vista. So now I have the Exchange Manager installed and working on W7 x64 as also the User & Computers console that comes along with the installation. I can't add them though in a new mmc console that I could use them along with other stuff in one console. So I have one mmc console that I use with stuff like ADUC(without exchange features), WSUS, ADSS, GPM, DHCP, DNS, Failover Cluster, Hyper-V Manager and different toolbar pins for Exchange Manager and User and Computer with Exchange features. I haven't checked If by creating a new user from ADUC (without the exchange features) still creates a user's mailbox. But the sure thing is that by creating a user from ADUC from Exchange Manager, the mailbox is being created normally.
March 19th, 2010 11:31am

This is what i did, it takes a lot of messing around to get it to work with windows 7 x64, the exchange tools do install and the system manager works as default but you do miss the extra extensions appearing in the mmc.silent install of the tools for 32bit works fine and you do not need seperate consoles to still manage the exchange 2003 environment.
Free Windows Admin Tool Kit Click here and download it now
March 19th, 2010 2:04pm

Blackman TFRC, Any chance that you could tell us exactly what steps you took to make this work in Win7 x64? I've searched and searched and tried various things until now I can't remember what I have or haven't tried, and I really need this functionality. It just seems ridiculous to have to install XP mode just for this one process, but I'm almost to that point...
March 30th, 2010 7:23pm

My friend, I have to admit that in order to tell you the exact steps that I took, I have to do the whole thing from the begining. I tried to install the same things in another Windows 7 64bit installation of one of my colleagues and even though I managed to install the Exchange Manager (which is the easy part) I wasn't able to have the features in exchange's ADUC. I am working on it...I have to check what extra step I did in my installation to have it working. I know how frustrating it is. I had to deal with XP mode myself to have my work done. And XP mode was mulfunctioning some times, or it was taking ages to start ADUC from it. I wish Microsoft would do something to make it easier for us. I will reply back as soon as possible.
Free Windows Admin Tool Kit Click here and download it now
March 30th, 2010 10:36pm

hi BlackmanTFRC,Could you email me that MSI you modify to see if it works instead of telling us each and every step?Thanks in advance for your time.
April 16th, 2010 9:25pm

I too am very interested in BlackmanTFRC's response to MIManzano post on getting this to work on 64-bit Win7 so that Exchange tabs are visualized in ADUC. We are a staff-challenged school district and the slow response to get XP Mode to initialize every time we need to perform Exchange-related ADUC tasks (which is very often) is a significant problem. MS needs to get closer to its customers' (particularly network administrators) needs when they develop new iterations of their management tools with an emphasis on down-level compatibility and ease of use. There are still many organizations on Exch 2003.
Free Windows Admin Tool Kit Click here and download it now
April 23rd, 2010 4:13pm

Hello all. I am sorry I haven't responded. I will get back to all of you as soon as I find some time from work.
April 23rd, 2010 5:38pm

Hoping BlackmanTRFC can find some time from work soon. It's a pain point for us and I'm sure many others.
Free Windows Admin Tool Kit Click here and download it now
May 4th, 2010 8:19pm

Im int the same boat... win 7 64-bit is a pain. Need a solution to this problem
May 6th, 2010 12:26am

Hey BlackmanTRFC, did it have anything to do with the folder SysNative? Really hoping you can let us know what you did. I would definetly buy you a beer... :)
Free Windows Admin Tool Kit Click here and download it now
May 9th, 2010 7:13am

We are all still twisting in the wind here absent Microsoft recognition of and fix for this problem. Any light you could shed on this would be sincerely appreciated.
June 4th, 2010 4:16pm

Hello All, Same problem and using the solutions as mentioned by Jean-Marc H: 1. installed the Windows XP mode component (WindowsXPMode_en-us.exe from http://go.microsoft.com/fwlink/?LinkId=148103) 2. installed Windows6.1-KB958559-x64 and Windows6.1-KB977206-x64 (you might not needs those, depending on your computer hardware). 3. once installed, Ive used the shortcut from the startmenu -> Windows Virtual PC\Windows XP Mode to setup and configure the virtual machine 4. I've joined the VirtualPC to the domain, important for the exchange tools :) and after the restart closed the VirtualPC 5. Presto!, the exchange management tools can now be started als a RemoteApp from the shortcut in the startmenu. Windows Virtual PC\Windows XP Mode Applications .
Free Windows Admin Tool Kit Click here and download it now
June 10th, 2010 2:13pm

Hi all. Finally after lots of work and couple of projects that had to be completed, I found some time for some tests and to reply back here. VSchoenmakers describes a way that it works. It might be laggy during the logon procedure to the xp mode while starting the remoteapp but it works for sure. The other way is to work inside the virtual machine. In my case I managed to install ESMVISTA on Win7 with the help of this http://forums.msexchange.org/m_1800503539/mpage_1/key_/tm.htm#1800509173 what we are dealing here is the problem with the 64bit Win7 installation, because I you search the web you will find out that there are working solutions for 32bit installations. From my side my news are not good. Indeed I had installed ESMVISTA (after editing it with the Orca editor) and then I was trying to make the tabs appear in the ADUC of RSAT and I finally got it working. I thought that this happened because I installed some stuff from microsoft and some other stuff I did, but unfortunatelly that wasn't the trick. I tried to do the same installations to other PCs or laptops and nothing worked (talking about the tabs on ADUC). Right now I have upgraded my installation to Exchange 2010, so I had to uninstall all these things from my computer to install the new Management Console. So, I dealt with the whole thing again in a virtua simulated environment. From where I didn't manage to have the tabs working. I am sorry guys that I didn't manage to be of any help. I think that I was just lucky to have done something that made the management console to work...and I didn't manage to do it again.
June 10th, 2010 3:51pm

i am trying to get this file to get ESM to work with win7 but the web address above is not working. can you tell another place where i can get the file? Thanks! http://nwcalc.web44.net/Win7/ ddb
Free Windows Admin Tool Kit Click here and download it now
June 29th, 2010 10:00pm

Why is this so hard for the Microsoft team to figure out? Can't they make this work on a Windows 7 x64 machine?....what a pain!!!!
July 7th, 2010 7:13pm

I have tried to insall this and worked perfectly, i uninstalled Outlook 2007 and then when i try and reinstall it, it does not let me?
Free Windows Admin Tool Kit Click here and download it now
July 22nd, 2010 5:36pm

it's easy : Download : http://www.microsoft.com/downloads/details.aspx?familyid=3403d74e-8942-421b-8738-b3664559e46f&displaylang=en Execute From CMD : ESMVISTA.MSI /passive and....Run from windows 7 x32 That's all folks! Si no funciona me avisan, por que a mi si me funciono.! Micky
July 27th, 2010 9:25pm

Hi Micky, Appreciate the keen response but i have tried that solution (Posted by many) but it does not work. It only works for win 7 x32 and not x64. Cheers, Stinny
Free Windows Admin Tool Kit Click here and download it now
July 28th, 2010 2:39am

I agree. I am in the same boat and would like to see a solution. I am running Windows 7 64-bit Professional and so far have not found a solution to bring up the exchange tabs and additional info tabs in ADUC.
July 29th, 2010 9:23pm

Finally!!! THANK YOU VERY MUCH!!! Works Great!!! Tim
Free Windows Admin Tool Kit Click here and download it now
September 1st, 2010 10:48pm

I know this is a little old but I had the same issue, did you find a fix for it?
October 14th, 2010 4:14pm

I tried multiple different ways to get this working but what worked for me using the command c:\>esmvista.msi /passive. This only works if you extract the .msi file from the .exe using a program like winrar, and then finding the directory that the .msi is located in dos. Works great with the 32bit version of Windows 7.
Free Windows Admin Tool Kit Click here and download it now
October 19th, 2010 11:44am

I purchased Win7 64-bit a few weeks ago and was very disappointed there were no Exchange tools that would work on 64-bit. I tried everything with no luck. I finally reformmated back to 32-bit becuase the Exch tools were a final deal breaker for 64-bit. The tools were among 4-5 other systems that were not supported. On 32-bit, I was finally able to get the Exch tools working using the /passive method. Using /Q did not work for me. The tabs are working in ADUC also. Thanks for everyone's work on this!!
November 9th, 2010 8:53am

64 bit Windows 7 solution: Do as explained above, but launch Active Directory in MMC 32 bit mode with: > mmc /32 then add the snap-in for Active Directory Users and Computers. It's that simple! Here's a full step-by-step installation procedure for Windows 7 64-bit usage of Active Directory (AD) with Exchange Deployment Tools tabs: 1. You first need Remote Server Administration Tools (RSAT) from Microsoft.. -- 1a. Make sure your Windows 7 does NOT have Service Pack 1 (KB976932) installed. If it is, uninstall it via start>control panel>view by:small icons>programs and features>view installed updates>..and uninstall KB976932... ..reboot.. We'll reinstall this in step 1d. -- 1b. For both Intel and AMD chip sets, download from Microsoft's site the 64bit Remote Server Administration Tools, file amd64fre_GRMRSATX_MSU.msu from MS' site http://www.microsoft.com/downloads/en/details.aspx?FamilyID=7d2f6ad7-656b-4313-a005-4e344e43997d -- 1c. Turn on the features of RSAT: start>control panel>programs and features>turn windows features on or off > ..expand every branch and check every box that is under branch Remote Server Administration Tools. -- 1d. Run Windows Updates to download and install Windows 7 Service Pack 1 (KB976932). ..reboot.. You'll now see that you have Active Directory Users and Computers under start>programs>administration tools> Active Directory Users and Computers 2. You now will installl the Exchange Management/Deployment Tools so you will see the tabs for Exchange under each users's AD tab. Unfortunately, as of Feb2011, MS still has not made a 64 bit Windows 7 install available for Exchange Deployment Tools... -- 2a. Download from MS file esmvista.exe (yes, Vista even though you're on Windows 7) from MS' site http://www.microsoft.com/downloads/details.aspx?familyid=3403d74e-8942-421b-8738-b3664559e46f&displaylang=en .... the .exe will create a folder named ESMVISTA, save it to your desktop perhaps. -- 2b. Launch a command window (start > ..type cmd in the search box and hit enter). In cmd's window, cd to the folder ESMVISTA (ex. cd %userprofile%\desktop\esmvista). type in: msiexec /i esmvista.msi /Q ... the /q stops the "this is not vista" popup warnings and will thus install it to your Windows 7 system. -- 2c. You must use the 32 bit MMC to use the snap-in for Active Directory in order to see the Exchange tabs. In the cmd window, type: mmc /32 ...this launches the 32 bit MMC. -- 2d. Add the AD snap-in: file> add/remove snap-ins > Active Directory Users and Computers [Add] [Ok] ...Now you go to your AD user branch and double click a user that has an Exchange mailbox and you'll see their Exchange tabs. -- 2c. Save off this MMC for quick future launching: File > save as > c:\programdata\microsoft\windows\start menu\programs\administrative tools\Active Directory 32-bit Users and Computers .....now next time you click start>programs>administrative tools> ...you will see the Active Directory 32-bit Users and Computers that you can launch. John
Free Windows Admin Tool Kit Click here and download it now
February 28th, 2011 4:33pm

John: Brilliant! Thanks for your directions above! Everything worked spendidly, until I tried to launch the now-saved AD 32-bit Users and Computers. The Exchange attributes are not there. If I recreate from step 2c onwards, it works. But whenever I save the 32-bit MMC, it loses the Exchange attributes. Am I missing something? Thanks again! Cheers!
March 10th, 2011 3:26pm

John: Thanks for the very detailed procedure!! I am also I am having the same experience as Agur Jakeh. Any ideas? Dave win7 64 sp1
Free Windows Admin Tool Kit Click here and download it now
March 10th, 2011 4:37pm

I found a way to get round the missing Exchange tools from a saved Active Directory 32bit User and Computers console. If you launch AD Users and Computers with the following command line "mmc /32 dsa.msc" it should launch an AD Users and Computers console with the Exchange attributes enabled.
March 11th, 2011 4:08am

I found a way to get round the missing Exchange tools from a saved Active Directory 32bit User and Computers console. If you launch AD Users and Computers with the following command line "mmc /32 dsa.msc" it should launch an AD Users and Computers console with the Exchange attributes enabled. Along with the instructions above from johnjn1971 and this command, I have created a shortcut for the Exchange ADUC console. By holding shift and right-clicking, I can then select "run as different user" which means I can use my higher privilege domain admin account as I did in WinXP. I have pinned this shortcut to my taskbar and this still works. Brilliant! Richard
Free Windows Admin Tool Kit Click here and download it now
April 6th, 2011 11:56am

FOR 64 BIT Just do the following 1. install RSAT on your WIN 7 x64 machine 2. Add your RSAT consoles via CONTORL PANEL programs and features 3. Install ESMVISTA using the MSIEXEC /I ESMVISTA.MSI /Q or ESMVISTA.MSI /passive 4. Open you ADMINISTRATIVE TOOLS folder and right click on Active Directry Users and Computers (ADUC) and choose properties 5. Add /32 to the end of the TARGET field, it should look like this "%SystemtRoot%\system32\dsa.msc /32" 6. Click ok and you should be good to go...it worked for me tabs and all.
May 2nd, 2011 3:09pm

FOR 64 BIT Just do the following 1. install RSAT on your WIN 7 x64 machine 2. Add your RSAT consoles via CONTORL PANEL programs and features 3. Install ESMVISTA using the MSIEXEC /I ESMVISTA.MSI /Q or ESMVISTA.MSI /passive 4. Open you ADMINISTRATIVE TOOLS folder and right click on Active Directry Users and Computers (ADUC) and choose properties 5. Add /32 to the end of the TARGET field, it should look like this "%SystemtRoot%\system32\dsa.msc /32" 6. Click ok and you should be good to go...it worked for me tabs and all. Perfect. I used the /passive switch for my install after the .msi was extracted from the .exe. Step 2.5 I would say, to extract the .msi file. EDIT - Almost perfect. I loose all my nice 2008R2 ADUC functions, so I actually need to have this run two different ways, with and without the /32 switch. So, here is my list: Without /32 switch: Published Certs. Member Of Password Repl. Object Security Env.* Sessions* Remote Control* RD Svcs. Prof.* Personal Virt. Desktop* COM+ UNIX Attrib. Attrib. Editor General Address Account Profile Telephones Organization With /32 switch: Published Certs. Member Of Password Repl. Object Security Exchange General* E-Mail Addresses* Exchange Feat.* Exch. Adv.* Attrib. Editor General Address Account Profile Telephones Organization *=Found in 1 but not the other
Free Windows Admin Tool Kit Click here and download it now
May 16th, 2011 1:48pm

FOR 64 BIT Just do the following 1. install RSAT on your WIN 7 x64 machine 2. Add your RSAT consoles via CONTORL PANEL programs and features 3. Install ESMVISTA using the MSIEXEC /I ESMVISTA.MSI /Q or ESMVISTA.MSI /passive 4. Open you ADMINISTRATIVE TOOLS folder and right click on Active Directry Users and Computers (ADUC) and choose properties 5. Add /32 to the end of the TARGET field, it should look like this "%SystemtRoot%\system32\dsa.msc /32" 6. Click ok and you should be good to go...it worked for me tabs and all. Perfect. I used the /passive switch for my install after the .msi was extracted from the .exe. Step 2.5 I would say, to extract the .msi file.
May 16th, 2011 1:48pm

it's easy : Download : http://www.microsoft.com/downloads/details.aspx?familyid=3403d74e-8942-421b-8738-b3664559e46f&displaylang=en Execute From CMD : ESMVISTA.MSI /passive and....Run from windows 7 x32 That's all folks! Si no funciona me avisan, por que a mi si me funciono.! Micky Thanks! This worked for me!
Free Windows Admin Tool Kit Click here and download it now
May 18th, 2011 3:06pm

Well, the test seem to worked out great, no issues or errors when adding users in ADUC.... For more details go to http://nwcalc.web44.net/Win7/ Will That modified version is perfect ! It's crazy that Microsoft did not released this version (or equivalent) already ! Many thanks :)
June 6th, 2011 5:25am

Sorry but yes! If you use the modified version found here http://nwcalc.web44.net/Win7/
Free Windows Admin Tool Kit Click here and download it now
June 6th, 2011 5:27am

This topic is archived. No further replies will be accepted.

Other recent topics Other recent topics