Error 1920. Service 'Office Software Protection Platform' (osppsvc) failed to start. Verify that you have sufficient privileges to start system services.
I'm trying to install Microsoft Office 2010 Professional.  I am running on Windows 7 Home Edition 64-bit.  I have previously installed the Microsoft Office 2010 Professional trial version, but later uninstalled it when the trial ran out.  I have tried changing the permissions in Office software Protection Platform.  I've also tried running a bat file (it didn't run) and I also tried giving the system all network controls as MS has insisted.  Nothing has worked yet.  Please help.
November 8th, 2010 7:01pm

I also cannot start the Office Software Protection Platform.  I get an error message 2:  The system cannot find the file specified.

 

 

Free Windows Admin Tool Kit Click here and download it now
November 8th, 2010 7:38pm

Hi,

See here for same issue: http://social.answers.microsoft.com/Forums/en-IN/officeinstall/thread/abec7bf4-25ca-468a-8ec5-9b8006d0345c Aleksdj provides the steps used solving his problem as follows: Step 1:

Go to Local Users and Groups: (http://www.sevenforums.com/tutorials/7539-local-users-groups-manager-open.html)

Step 2:

Go to Groups and double click Admistrators

Step 3:

Click Add, click Advanced and click Find Now 

Step 4:

Double Click in Network Service (in the bottom list) and click Ok

Final Step:

Click Ok and try to Install the Office Suite again.

And Ruhul also gives another method, I think you may have a try.

Open Run (Press Windows key + R) > type services.msc and click on OK

On the services MMC window right-click on Office Software Protection Platform and select Properties

Select the LOG ON tab > change the ‘Log on as’ information from ‘This Account’ (Network Service) to ‘Local System Account’

Click on Apply and OK

Hope that helps.

  • Proposed as answer by Martin Mora Wednesday, September 18, 2013 3:05 PM
November 9th, 2010 5:54am

Hi,

See here for same issue: http://social.answers.microsoft.com/Forums/en-IN/officeinstall/thread/abec7bf4-25ca-468a-8ec5-9b8006d0345c Aleksdj provides the steps used solving his problem as follows: Step 1:

Go to Local Users and Groups: (http://www.sevenforums.com/tutorials/7539-local-users-groups-manager-open.html)

Step 2:

Go to Groups and double click Admistrators

Step 3:

Click Add, click Advanced and click Find Now 

Step 4:

Double Click in Network Service (in the bottom list) and click Ok

Final Step:

Click Ok and try to Install the Office Suite again.

And Ruhul also gives another method, I think you may have a try.

Open Run (Press Windows key + R) > type services.msc and click on OK

On the services MMC window right-click on Office Software Protection Platform and select Properties

Select the LOG ON tab > change the ‘Log on as’ information from ‘This Account’ (Network Service) to ‘Local System Account’

Click on Apply and OK

Hope that helps.

Free Windows Admin Tool Kit Click here and download it now
November 9th, 2010 8:54am

Hi,

See here for same issue: http://social.answers.microsoft.com/Forums/en-IN/officeinstall/thread/abec7bf4-25ca-468a-8ec5-9b8006d0345c Aleksdj provides the steps used solving his problem as follows: Step 1:

Go to Local Users and Groups: (http://www.sevenforums.com/tutorials/7539-local-users-groups-manager-open.html)

Step 2:

Go to Groups and double click Admistrators

Step 3:

Click Add, click Advanced and click Find Now 

Step 4:

Double Click in Network Service (in the bottom list) and click Ok

Final Step:

Click Ok and try to Install the Office Suite again.

And Ruhul also gives another method, I think you may have a try.

Open Run (Press Windows key + R) > type services.msc and click on OK

On the services MMC window right-click on Office Software Protection Platform and select Properties

Select the LOG ON tab > change the ‘Log on as’ information from ‘This Account’ (Network Service) to ‘Local System Account’

Click on Apply and OK

Hope that helps.

  • Proposed as answer by Martin Mora Wednesday, September 18, 2013 3:05 PM
November 9th, 2010 8:54am

Hi,

See here for same issue: http://social.answers.microsoft.com/Forums/en-IN/officeinstall/thread/abec7bf4-25ca-468a-8ec5-9b8006d0345c Aleksdj provides the steps used solving his problem as follows: Step 1:

Go to Local Users and Groups: (http://www.sevenforums.com/tutorials/7539-local-users-groups-manager-open.html)

Step 2:

Go to Groups and double click Admistrators

Step 3:

Click Add, click Advanced and click Find Now 

Step 4:

Double Click in Network Service (in the bottom list) and click Ok

Final Step:

Click Ok and try to Install the Office Suite again.

And Ruhul also gives another method, I think you may have a try.

Open Run (Press Windows key + R) > type services.msc and click on OK

On the services MMC window right-click on Office Software Protection Platform and select Properties

Select the LOG ON tab > change the ‘Log on as’ information from ‘This Account’ (Network Service) to ‘Local System Account’

Click on Apply and OK

Hope that helps.

  • Proposed as answer by Martin Mora Wednesday, September 18, 2013 3:05 PM
Free Windows Admin Tool Kit Click here and download it now
November 9th, 2010 8:54am

Thanks for your help, but I'm already set up as the Administrator.  I only have one account on this computer and Windows 7 forces you to designate at least one user as an Administrator.  When I tried doing the first step, there wasn't a folder or icon for local users and groups.  I think I have a bad key.   '

 

November 10th, 2010 1:59am

Hi tronixmart, the problem is not a bad key. . .

First of all, if you are using Win 7 Home Premium (as I am), Home Basic, or Starter, you will not have a Local Users and Groups option. It is only for Win 7 Ultimate, Professional, or Enterprise.

Jennifer Zhan's second suggestion regarding the changing of 'This account' to 'Local system account' under the "Log on" tab in the properties window of Office Software Protection Platform is better, but still not adequate. If you try this, as I did, and then manually start Office Software Protection Platform before continuing the Office 2010 installation from the point of error, you will receive a new surprise. The Error 1920 message goes away, but then it is replaced with an oh-so-descriptive dialogue box telling you that "Microsoft Office 2010 installation encountered an error." Nice.

Changing 'This account' to 'Local system account' is useless, because after the error described above, the system somehow reverts the log on selection for Office Software Protection Platform back to 'This account,' with 'Network service' selected by default.

The better solution is to give the user account called 'Network service' full permissions for the appropriate folders and registry entries. Simply follow these instructions I found on another forum:

In Windows Explorer:

Right Click  on the folder OfficeSoftwareProtection Platform from C:\Program Files\Common Files\Microsoft Shared and Microsoft from C:Program data(hidden folder) Properties > Security > Edit > Add > Type Network Service > OK > Check the Full control box > Apply and OK.

In Registry Editor (regedit.exe):

Go to HKEY_CLASSES_ROOT\AppID registry >Right Click on the folder > Permissions > Add > TypeNETWORK SERVICE >  OK > Check Full Control > Apply > OK

This worked for me and many others with the same problem, and took mere minutes to do.

  • Marked as answer by Jennifer Zhan Thursday, November 18, 2010 7:14 AM
Free Windows Admin Tool Kit Click here and download it now
November 12th, 2010 12:07am

Hi tronixmart, the problem is not a bad key. . .

First of all, if you are using Win 7 Home Premium (as I am), Home Basic, or Starter, you will not have a Local Users and Groups option. It is only for Win 7 Ultimate, Professional, or Enterprise.

Jennifer Zhan's second suggestion regarding the changing of 'This account' to 'Local system account' under the "Log on" tab in the properties window of Office Software Protection Platform is better, but still not adequate. If you try this, as I did, and then manually start Office Software Protection Platform before continuing the Office 2010 installation from the point of error, you will receive a new surprise. The Error 1920 message goes away, but then it is replaced with an oh-so-descriptive dialogue box telling you that "Microsoft Office 2010 installation encountered an error." Nice.

Changing 'This account' to 'Local system account' is useless, because after the error described above, the system somehow reverts the log on selection for Office Software Protection Platform back to 'This account,' with 'Network service' selected by default.

The better solution is to give the user account called 'Network service' full permissions for the appropriate folders and registry entries. Simply follow these instructions I found on another forum:

In Windows Explorer:

Right Click  on the folder OfficeSoftwareProtection Platform from C:\Program Files\Common Files\Microsoft Shared and Microsoft from C:Program data(hidden folder) Properties > Security > Edit > Add > Type Network Service > OK > Check the Full control box > Apply and OK.

In Registry Editor (regedit.exe):

Go to HKEY_CLASSES_ROOT\AppID registry >Right Click on the folder > Permissions > Add > TypeNETWORK SERVICE >  OK > Check Full Control > Apply > OK

This worked for me and many others with the same problem, and took mere minutes to do.

  • Marked as answer by Jennifer Zhan Thursday, November 18, 2010 7:14 AM
November 12th, 2010 3:07am

Hi tronixmart, the problem is not a bad key. . .

First of all, if you are using Win 7 Home Premium (as I am), Home Basic, or Starter, you will not have a Local Users and Groups option. It is only for Win 7 Ultimate, Professional, or Enterprise.

Jennifer Zhan's second suggestion regarding the changing of 'This account' to 'Local system account' under the "Log on" tab in the properties window of Office Software Protection Platform is better, but still not adequate. If you try this, as I did, and then manually start Office Software Protection Platform before continuing the Office 2010 installation from the point of error, you will receive a new surprise. The Error 1920 message goes away, but then it is replaced with an oh-so-descriptive dialogue box telling you that "Microsoft Office 2010 installation encountered an error." Nice.

Changing 'This account' to 'Local system account' is useless, because after the error described above, the system somehow reverts the log on selection for Office Software Protection Platform back to 'This account,' with 'Network service' selected by default.

The better solution is to give the user account called 'Network service' full permissions for the appropriate folders and registry entries. Simply follow these instructions I found on another forum:

In Windows Explorer:

Right Click  on the folder OfficeSoftwareProtection Platform from C:\Program Files\Common Files\Microsoft Shared and Microsoft from C:Program data(hidden folder) Properties > Security > Edit > Add > Type Network Service > OK > Check the Full control box > Apply and OK.

In Registry Editor (regedit.exe):

Go to HKEY_CLASSES_ROOT\AppID registry >Right Click on the folder > Permissions > Add > TypeNETWORK SERVICE >  OK > Check Full Control > Apply > OK

This worked for me and many others with the same problem, and took mere minutes to do.

  • Marked as answer by Jennifer Zhan Thursday, November 18, 2010 7:14 AM
Free Windows Admin Tool Kit Click here and download it now
November 12th, 2010 3:07am

Hi tronixmart, the problem is not a bad key. . .

First of all, if you are using Win 7 Home Premium (as I am), Home Basic, or Starter, you will not have a Local Users and Groups option. It is only for Win 7 Ultimate, Professional, or Enterprise.

Jennifer Zhan's second suggestion regarding the changing of 'This account' to 'Local system account' under the "Log on" tab in the properties window of Office Software Protection Platform is better, but still not adequate. If you try this, as I did, and then manually start Office Software Protection Platform before continuing the Office 2010 installation from the point of error, you will receive a new surprise. The Error 1920 message goes away, but then it is replaced with an oh-so-descriptive dialogue box telling you that "Microsoft Office 2010 installation encountered an error." Nice.

Changing 'This account' to 'Local system account' is useless, because after the error described above, the system somehow reverts the log on selection for Office Software Protection Platform back to 'This account,' with 'Network service' selected by default.

The better solution is to give the user account called 'Network service' full permissions for the appropriate folders and registry entries. Simply follow these instructions I found on another forum:

In Windows Explorer:

Right Click  on the folder OfficeSoftwareProtection Platform from C:\Program Files\Common Files\Microsoft Shared and Microsoft from C:Program data(hidden folder) Properties > Security > Edit > Add > Type Network Service > OK > Check the Full control box > Apply and OK.

In Registry Editor (regedit.exe):

Go to HKEY_CLASSES_ROOT\AppID registry >Right Click on the folder > Permissions > Add > TypeNETWORK SERVICE >  OK > Check Full Control > Apply > OK

This worked for me and many others with the same problem, and took mere minutes to do.

  • Marked as answer by Jennifer Zhan Thursday, November 18, 2010 7:14 AM
November 12th, 2010 3:07am

Good job.  It fixed the problem.  No one else had the right fix.
Free Windows Admin Tool Kit Click here and download it now
September 19th, 2011 5:28pm

I know this thread is old and probably isn't looked at but if it is I wanted to thank you Sir Chump.  I spent the better part of 2 hours trying to fix this error on my own. 

Thank you for contributing. 

October 7th, 2011 2:57am

Hey Sir Chump - I like philo_ wanted to say thank you for the help. I've spent over 5 hours trying to troubleshoot this issue trying various methods (including all the official MS support suggestions) only resulting in more work on my end. I was very close to giving up but thanks to your response my problems are finally fully resolved. Thanks again.

(And for those of you out there who found this information useful as well - take one more minute out of your lives to show some appreciation for the person who helped you out.)

Free Windows Admin Tool Kit Click here and download it now
December 11th, 2011 4:47am

I did the following and am still having issues...

click on window, computer- in the search key type "OFFICESOFTWAREPROTECTION" from the list provided, I right clicked on the OFFICESOFTWAREPROTECTION PLATFORM folder.  I added Network Service and gve it full control

I unhid files and found program data on the C:\.  Right click and add network service there too.  I have norton that would not allow changes.  but the other files were updated w/o issue.

I followed the registry editor directions too.

reboot

tried running the program again and received the same 1920 error.  I did note that I had program file and program file (x86).  there was no office software protection under the program file (x86).

Any suggestions?

June 9th, 2012 11:47pm

This worked for me. Thank you!
Free Windows Admin Tool Kit Click here and download it now
March 20th, 2013 5:41pm

Hello Sir...!!
I am really gratefull to you for typing this solution ...it was really helpful.....i was unable to install Office 2013 professional plus since a long time because i always encountered this error "Microsoft Office 2013 installation encountered an error." after i started the osppsvc manually......tried alot with deleting registries ...even the MSI logging....but the installation was always disastrous.....but your solution worked for me....
thanks alot
September 13th, 2013 2:32pm

Thank you sir! You have really saved my ass. I tried all means but it couldnt work. Until I tried your suggestion.
Free Windows Admin Tool Kit Click here and download it now
September 26th, 2013 11:56pm

After some hours of debug (..) I've found your post and it solves the problem!! Thank you very much!!
December 14th, 2013 4:30pm

Good Job.

Also for me following resolution works (with proper permissions, as I am the administrator):

1) For windows XP & server 2003

        a. Click Start and click Run.

        b. Type the following command line, and then press ENTER:

        cacls "C:\Program Files\Common Files\Microsoft Shared\OfficeSoftwareProtectionPlatform" /t /e /p "Network Service":F

        c. Try the install of Office 2010.

2) For windows Vista and windows 7

        a. Click Start and click Run.

        b. Type the following command line, and then press ENTER:

        icacls "C:\Program Files\Common Files\Microsoft Shared\OfficeSoftwareProtectionPlatform" /grant "Network Service:F" /t

        c. Try the install of Office 2010.

Thanks

Free Windows Admin Tool Kit Click here and download it now
December 31st, 2013 4:11am

Great Job Sir Chump,

Worked for me after a big run around from you know who!

Thanks A Mill !

Herc.

April 17th, 2014 1:13am

Thank you so much. You resolved my problem!
Free Windows Admin Tool Kit Click here and download it now
September 25th, 2014 11:20pm

Thanks, its worked for me, i have spend two days to solve this issue, finally i have solved using this solution.
June 4th, 2015 11:08am

This topic is archived. No further replies will be accepted.

Other recent topics Other recent topics