was working with the last build but with 10041 it doesn't, gives the error 8024A000 straight away

I'm running Enterprise preview

Same here. Regular version, not enterprise.

Hi,

If you receive Windows Update error 0x8024a000 when you use Windows Update, the cause might be a connection interruption between your computer and the Windows Update service. First, please make sure that the internet connection is fine, you can right-click the start menu\Search, then type identify and repair, then clicking Identify and repair network problems

or you can run the built-in Windows Update Troubleshooter (contorl panel\All contorl panel items\Troubleshooting\System and Security\Windows Update)

Regards

It doesnt work for me and i find this one 

"

Stopping services pertaining to Windows Update

1.     Click Start, click All Programs, click Accessories, right-click Command Prompt, and select Run as Administrator.

2.     If you receive a notification from User Account Control simply click Continue.

3.     At the command prompt, type the following, commands and then press ENTER after each command.

        net stop wuauserv
        net stop bits

        net stop cryptsvc

4.     Please do not close the Command Prompt window.

 

Renaming folders pertaining to Windows Update

1.     At the command prompt, type the following commands, and then press Enter after each command:

2.     ren %systemroot%\System32\Catroot2 Catroot2.old

3.     ren %systemroot%\SoftwareDistribution SoftwareDistribution.old

4.     Please do not close the Command Prompt window.

 

Registering DLLs pertaining to Windows Update

1.     Please copy and paste the following text into a new Notepad document, and save the file asWindowsUpdate.BAT

2.     If saved correctly the icon will change from a Notepad file to BAT file which has two blue cogs as its icon.

            -or-

3.     You can manually type each command at the command prompt:

regsvr32 c:\windows\system32\vbscript.dll /s

regsvr32 c:\windows\system32\mshtml.dll /s

regsvr32 c:\windows\system32\msjava.dll /s

regsvr32 c:\windows\system32\jscript.dll /s

regsvr32 c:\windows\system32\msxml.dll /s

regsvr32 c:\windows\system32\actxprxy.dll /s

regsvr32 c:\windows\system32\shdocvw.dll /s

regsvr32 wuapi.dll /s

regsvr32 wuaueng1.dll /s

regsvr32 wuaueng.dll /s

regsvr32 wucltui.dll /s

regsvr32 wups2.dll /s

regsvr32 wups.dll /s

regsvr32 wuweb.dll /s

regsvr32 Softpub.dll /s

regsvr32 Mssip32.dll /s

regsvr32 Initpki.dll /s

regsvr32 softpub.dll /s

regsvr32 wintrust.dll /s

regsvr32 initpki.dll /s

regsvr32 dssenh.dll /s

regsvr32 rsaenh.dll /s

regsvr32 gpkcsp.dll /s

regsvr32 sccbase.dll /s

regsvr32 slbcsp.dll /s

regsvr32 cryptdlg.dll /s

regsvr32 Urlmon.dll /s

regsvr32 Shdocvw.dll /s

regsvr32 Msjava.dll /s

regsvr32 Actxprxy.dll /s

regsvr32 Oleaut32.dll /s

regsvr32 Mshtml.dll /s

regsvr32 msxml.dll /s

regsvr32 msxml2.dll /s

regsvr32 msxml3.dll /s

regsvr32 Browseui.dll /s

regsvr32 shell32.dll /s

regsvr32 wuapi.dll /s

regsvr32 wuaueng.dll /s

regsvr32 wuaueng1.dll /s

regsvr32 wucltui.dll /s

regsvr32 wups.dll /s

regsvr32 wuweb.dll /s

regsvr32 jscript.dll /s

regsvr32 atl.dll /s

regsvr32 Mssip32.dll /s

 Restarting services pertaining to Windows Update

1.     Click Start, click All Programs, click Accessories, right-click Command Prompt, and select Run as Administrator.

2.     If you receive a notification from User Account Control simply click Continue.

3.     At the command prompt, type the following, commands and then press ENTER after each command.

        net start wuauserv
        net start bits

        net start cryptsvc

        exit

4.     Now please check for updates using Windows Update to see if the issue has been resolved.

These steps were provided by MVP, BSOD."

But this one doesnt help to, any ideas?